大网数据广告活动
域与目录服务

Troubleshooting AD Replication error 1818

· 52CE 我爱测

Describes an issue where AD operations fail with error 1818 (The remote procedure call was cancelled (RPC_S_CALL_CANCELLED)).

This article describes an issue where Active Directory Replications fail with error 1818: The remote procedure call was cancelled (RPC_S_CALL_CANCELLED).

Note: Home users: This article is only intended for technical support agents and IT professionals. If you're looking for help with a problem, ask the Microsoft Community.

Original KB number:   2694215

Symptoms

This article describes the symptoms, cause, and resolution steps when Active Directory replication fails with error 1818: The remote procedure call was cancelled (RPC_S_CALL_CANCELLED).

  1. Possible formats for the error include:

    Decimal Hex Symbolic Error string
    1818 0x71a RPC_S_CALL_CANCELLED The remote procedure call was cancelled.
  2. The following events get logged

    Event source Event ID Event string
    NTDS Replication 1232 Active Directory attempted to perform a remote procedure call (RPC) to the following server. The call timed out and was cancelled.
    NTDS Replication 1188 A thread in Active Directory is waiting for the completion of an RPC made to the following domain controller.Domain controller:b8b5a0e4-92d5-4a88-a601-61971d7033af._msdcs.Contoso.comOperation:get changesThread ID:448Timeout period (minutes):5Active Directory has attempted to cancel the call and recover this thread.User ActionIf this condition continues, restart the domain controller.
    NTDS Replication 1173 with error status 1818 Internal event: Active Directory has encountered the following exception and associated parameters. Exception: e0010002 Parameter: 0 Additional Data Error value: 1818 Internal ID: 5000ede
    NTDS Replication 1085 with error status 1818 Internal event: Active Directory could not synchronize the following directory partition with the domain controller at the following network address.Directory partition: <NC>Network address: <GUID-based DC name>If this error continues, the Knowledge Consistency Checker (KCC) will reconfigure the replication links and bypass the domain controller.User ActionVerify that the network address can be resolved with a DNS query.Additional Data Error value: 1818 The remote procedure call was cancelled.

    . Repadmin /showreps displays the following error message

    DC=Contoso,DC=com

    <Sitename>\<DCname> via RPC DC

    DC object GUID: <GUID> Last attempt @ 2009-11-25 10:56:55 failed, result 1818 (0x71a): Can't retrieve message string 1818

    (0x71a), error 1815. 823 consecutive failure(s). Last success @ (never).

  3. Repadmin /showreps from Domain Controller Name shows that it's failing to pull Domain NC from <SiteName> but can pull all other NCs

    ===================

    <Sitename>\<DC name>

    DC Options: IS_GC

    Site Options: IS_INTER_SITE_AUTO_TOPOLOGY_DISABLED

    DC object GUID: <GUID>

    DC invocationID: <InvocationID>

    ==== INBOUND NEIGHBORS =====================================

    DC=Contoso,DC=com

    <Sitename>\<DCname> via RPC DC

    DC object GUID: <GUID>

    Last attempt @ <DateTime> failed, result 1818 (0x71a):

    Can't retrieve message string 1818 (0x71a), error 1815. 123 consecutive

    failure(s). Last success @ (never).

  4. DCPromo fails while promoting a new domain controller and you see the following error on the DCPROMO GUI

    Active Directory Installation wizard.

    The Operation Failed because: Active Directory could not replicate the directory partition
    CN=Configuration....from the remote domain controller "server name"
    " The remote procedure call was cancelled "

    The following entries are logged in the DCPROMO logs

    <DateTime> [INFO] EVENTLOG (Informational): NTDS General / Service Control : 1004

    Active Directory Domain Services was shut down successfully.

    <DateTime> [INFO] NtdsInstall for <FQDN fo the domain> returned 1818

    <DateTime> [INFO] DsRolepInstallDs returned 1818

    <DateTime> [ERROR] Failed to install to Directory Service (1818)

    <DateTime> [ERROR] DsRolepFinishSysVolPropagation (Abort Promote) failed with 8001

    <DateTime> [INFO] Starting service NETLOGON

    <DateTime> [INFO] Configuring service NETLOGON to 2 returned 0

    <DateTime> [INFO] The attempted domain controller operation has completed

    <DateTime> [INFO] DsRolepSetOperationDone returned 0

  5. While trying to rehost a partition on the Global catalog

    repadmin /rehost fail with DsReplicaAdd failed with status

    1818 (0x71a)>

    DsReplicaAdd fails with status 1818 (0x71a)

Cause

The issue occurs when the destination DC performing inbound replication doesn't receive replication changes within the number of seconds specified in the RPC Replication Timeout (mins) registry value (the default value is five minutes if the registry entry doesn't exist). You might experience this issue most frequently in one of the following situations:

  • You promote a new domain controller into the forest by using the Active Directory Domain Services Configuration Wizard from the Server Manager management console or via the Install-ADDSDomainController cmdlet.
  • Existing domain controllers replicate from source domain controllers that are connected over slow network links.

Note:

  • Registry value name: RPC Replication Timeout (mins)
  • Registry value location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters
  • Registry value type: REG_DWORD

If a destination domain controller that is performing RPC-based replication doesn't receive the requested replication package within the time that the RPC Replication Timeout (mins) registry setting specifies, the destination domain controller ends the RPC connection with the nonresponsive source domain controller and logs a warning event.

Some specific root causes for Active Directory logging 1818 \ 0x71a \ RPC_S_CALL_CANCELLED include:

  1. An earlier Network Interface Card driver installed on Domain Controllers could cause failure of a few network features like Scalable Networking Pack (SNP).
  2. Low bandwidth or network packets drops between source and destination domain controllers.
  3. The networking device between source and destination device dropping packets.

Note: A speed and duplex mismatch between the NIC and switch on a domain controller could cause dropped frames, resets, duplicate acknowledgments, and retransmitted frames.

Resolution

  1. Inspect the network devices between the source and destination domain controllers (increase the bandwidth of your network connection so that the Active Directory changes replicate in the five-minute timeout period.)

  2. Update the network adapter drivers.

    To determine whether an updated network adapter driver is available, contact the network adapter manufacturer or the original equipment manager (OEM) for the computer. The driver must meet Network Driver Interface Specification (NDIS) 5.2 or a later version of this specification.

  3. Check the network binding order:

    To configure the network binding order:

    1. Quit any programs that are running.

    2. Right-click Network Neighborhood, and then select Properties.

    3. Select the Bindings tab. In the Show Bindings For box, select All Services.

    4. Double-click each listed service to expand it.

    5. Under each service, double-click each protocol to expand it.

    6. Under each protocol, there are many network adapter icons. Select the icon for your network adapter, and then select Move Up until the network adapter is at the top of the list. Leave the Remote Access WAN Wrapper entries in any order under the network adapter(s).

      [!NOTE] If you have more than one network adapter, place the internal adapter (with Internet Protocol [IP] address 10.0.0.2 by default on a Small Business Server network) at the top of the binding order, with the external adapter(s) directly below the internal adapter.

      The final order should appear similar to:

      [1] Network adapter one
      [2] Network adapter two (if present)
      [3] Remote Access WAN Wrapper
      .
      .
      .
      [n] Remote Access WAN Wrapper

    7. Repeat step f for each service in the dialog box.

    8. After you verify the settings for each service, select All Protocols in the Show Bindings For box. The entry for Remote Access WAN Wrapper doesn't have a network adapter listed. Skip this item. Repeat steps d through f for each remaining protocol.

    9. After you verify that the bindings are set correctly for all services and protocols, select OK. This initializes the rebinding of the services. When this is complete, you're prompted to restart the computer. Select Yes.

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for Active Directory replication issues.

More information

Active Directory changes don't replicate

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。