大网数据广告活动
域与目录服务

Time synchronization may not succeed

· 52CE 我爱测

Describes a problem that may occur when you try to use a non-Windows NTP time server as a time source. Provides steps to let you synchronize to the non-Windows NTP server.

When you try to synchronize a Windows-based computer to a Network Time Protocol (NTP) server that isn't running Windows, the synchronization may not succeed. This article provides a resolution to this issue.

Applies to:   Windows Server (All supported versions), Windows Client (All supported versions)
Original KB number:   875424

Cause

This problem may occur when your computer sends synchronization requests by using symmetric active mode. By default, Windows Server domain controllers are configured as time servers and use symmetric active mode to send synchronization requests. Some NTP servers that don't run Windows respond only to requests that use client mode.

Resolution

To resolve this problem, configure Windows Time to use client mode when it synchronizes with the time server. Follow these steps:

  1. Select Start, search for cmd, right-click Command Prompt, and then select Run as administrator.

  2. In the Command Prompt window, run the following commands:

    w32tm /config /manualpeerlist:<NTP_server_IP_Address>,0x8 /syncfromflags:MANUAL
    net stop w32time
    net start w32time
    w32tm /resync
    

More information

The mode that Windows Time uses to send requests is set by the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer
If the value of the Enabled entry in this subkey is 1, Windows Time uses symmetric active mode. Otherwise, Windows Time uses client mode.

The 0x8 setting that is referenced in the command in the "Resolution" section sets Windows Time to use client mode.

The valid settings for the mode used with the /manualpeerlist switch include:

  • 0x01 - use special poll interval SpecialInterval
  • 0x02 - UseAsFallbackOnly
  • 0x04 - send request as SymmetricActive mode
  • 0x08 - send request as Client mode

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。