大网数据广告活动
备份与恢复

Error message when you use the DiskPart break command

· 52CE 我爱测

Describes an issue where an error occurs when you use the DiskPart break command to break a mirrored set.

This article describes an issue where an error occurs when you use the DiskPart break command to break a mirrored set.

Original KB number:   331494

Symptoms

When you use the DiskPart text-mode command interpreter (Diskpart.exe) and you select a mirrored volume and then use the break command to break the mirrored volume in two volumes, you may receive one of the following error messages:

The arguments you specified for this command are not valid.

-or-

The disk management services could not complete the operation.

Cause

This behavior may occur if one of the two disks that contain the mirrors is missing and you're using incorrect syntax for the break command.

Resolution

To resolve this behavior, use the disk parameter to refer to the missing disk, and use the nokeep parameter.

Without the nokeep parameter, the break command tries to convert both mirrors to simple volumes, retaining the data. If one of the disks is missing, this isn't possible. By using the nokeep parameter, you retain only one half of the mirror as a simple volume, and the other half is deleted and converted to free space. Neither volume receives the focus.

For example, select the mirrored volume, issue the "detail volume" command, then break the mirror as follows:

diskpart> List Volume

Volume ###  Ltr  Label       Fs    Type       Size    Status    Info
 ---------- --- ----------- ----- ---------- ------- --------- --------
 Volume 0   D   data_vol    NTFS  Mirror     737 KB   Failed Rd
 Volume 1   C   system      NTFS  Simple     3000 MB           Boot

diskpart> select volume 0

Volume 0 is the selected volume.

Diskpart> detail volume

Disk ###     Status  Size   Free   Dyn Gpt
 ---------- ------- ------- ---    --- ---
 Disk 1     Online  1023 MB 737 KB *
 Disk M0    Missing 1022 MB 0 B    *

In this example, the correct command to break the mirrored volume is:
Diskpart> break disk=m0 nokeep

After you issue this command, the mirror on Disk 1 is converted to a simple volume, and the reference to the missing mirror is deleted from the Logical Disk Management (LDM) database.

Status

This behavior is by design.

More information

For additional information about using DiskPart to manage disks, click the following article number to view the article in the Microsoft Knowledge Base:

300415 A Description of the DiskPart Command-Line Utility

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。