大网数据广告活动
备份与恢复

Restore system/boot drive letter

· 52CE 我爱测

Describes how to change the system or boot drive letter in Windows.

This article describes how to change the system or boot drive letter in Windows.

Original KB number:   223188

Summary

Warning: Don't use the procedure that's described in this article to change a drive on a computer where the drive letter hasn't changed. If you do so, you may not be able to start your operating system. Follow the procedure that's described in this article only to recover from a drive letter change, not to change an existing computer drive to something else. Back up your registry keys before you make this change.

This article describes how to change the system or boot drive letter. Usually it isn't recommended, especially if the drive letter is the same as when Windows was installed. The only time that you may want to do so is when the drive letters get changed without any user intervention. It may happen when you break a mirror volume or there's a drive configuration change. This situation should be a rare occurrence, and you should change the drive letters back to match the initial installation.

To change or swap drive letters on volumes that can't otherwise be changed using the Disk Management snap-in, use the following steps.

Note: In these steps, drive D refers to the (wrong) drive letter assigned to a volume, and drive C refers to the (new) drive letter you want to change to, or to assign to the volume.

This procedure swaps drive letters for drives C and D. If you don't need to swap drive letters, name the \DosDevice\letter: value to any new drive letter not in use.

Change the system or boot drive letter

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see How to back up and restore the registry in Windows.

  1. Make a full system backup of the computer and system state.

  2. Sign in as an Administrator.

  3. Start Regedt32.exe.

  4. Locate the following registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

  5. Select MountedDevices.

  6. On the Security menu, select Permissions.

  7. Verify that Administrators have full control. Change it back when you are finished with these steps.

  8. Quit Regedt32.exe, and then start Regedit.exe.

  9. Locate the following registry key:

    HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

  10. Find the drive letter you want to change to (new). Look for \DosDevices\C:.

  11. Right-click \DosDevices\C:, and then select Rename.

    [!NOTE] You must use Regedit instead of Regedt32 to rename this registry key.

  12. Rename it to an unused drive letter \DosDevices\Z:.

    It frees up drive letter C.

  13. Find the drive letter you want changed. Look for \DosDevices\D:.

  14. Right-click \DosDevices\D:, and then select Rename.

  15. Rename it to the appropriate (new) drive letter \DosDevices\C:.

  16. Select the value for \DosDevices\Z:, select Rename, and then name it back to \DosDevices\D:.

  17. Quit Regedit, and then start Regedt32.

  18. Change the permissions back to the previous setting for Administrators. It should probably be Read Only.

  19. Restart the computer.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。