大网数据广告活动
备份与恢复

Troubleshoot Data Corruption and Storage Replication Failures in Windows Server 2025

· 52CE 我爱测

Discusses how to identify, troubleshoot, and resolve issues that relate to data corruption, disk errors, and storage replication failures in Windows Server 2025.

This article discusses how to identify, troubleshoot, and resolve issues that relate to data corruption, disk errors, and storage replication failures in Windows Server 2025. These issues can affect storage performance, data integrity, and replication reliability in your environment.

Symptoms

You might experience one or more of the following symptoms in Windows Server 2025:

  • The event logs list disk, storage, and replication-related errors. These errors might include the following events:

    • Event ID 7 (device error)
    • Event ID 11 (controller error)
    • Event ID 153 (disk timeout)
    • Event ID 1112 (Storage Replica replication error)
  • Files or databases appear to be corrupted, or application storage appears to be corrupted.

  • Storage Replica experiences replication failures.

  • Storage monitoring tools generate warnings or alerts that indicate degraded performance or reliability.

Cause

The following factors can cause these issues:

  • Physical disk failures, such as bad sectors or mechanical defects
  • Data corruption within the storage subsystem
  • Underlying storage hardware issues that interfere with replication processes
  • Misconfigured storage replication settings, such as inadequate log sizes or incorrect replication mode
  • Disk configuration issues that reduce system resilience

Resolution

Important:
Before you start troubleshooting storage issues, make sure that you have current backups of all critical data.

To resolve data corruption and storage replication failures in Windows Server 2025, follow these steps.

  1. To inspect hardware for failing disks, open a Windows PowerShell command prompt, and then run the following cmdlets:

    Get-PhysicalDisk | Format-Table -AutoSize
    Get-PhysicalDisk | Get-StorageReliabilityCounter
    

    If a disk or controller is defective, replace it promptly to prevent further corruption or replication errors.

  2. Make sure that all storage arrays, RAID configurations, and storage area networks (SANs) or network attached storage (NAS) devices are functioning correctly, and use tools such as Performance Monitor (Perfmon) to verify their performance.

  3. Make sure that firmware is up to date on all storage controllers.

  4. To fix bad disk sectors and recover as much data as possible, open a Windows Command Prompt window, and then run the following command:

    chkdsk <Drive>: /F /R
    

    [!NOTE]
    In this command, <Drive> represents the drive to be fixed.

  5. If chkdsk doesn't recover some part of the data, restore that data from your backup.

  6. Review your disk and Storage Replica configuration, and make sure that your system follows best practices. Closely review the following settings:

    • Allocate sufficient space for log files (production workloads should have at least 8 GB available for log files).
    • Allocate sufficient network bandwidth for replication traffic.
    • Verify the volume alignment and cluster size settings.
    • Verify that the replication mode (synchronous or asynchronous) matches your requirements.
    • Make sure that all replication nodes are running Windows Server Datacenter edition.
  7. To verify that you restored data consistency and transfer reliability, test storage replication. At a PowerShell command prompt, run the following cmdlets:

    Get-SRGroup | Format-List *
    Get-SRPartnership | Format-List *
    Test-SRTopology -SourceComputerName Server1 -SourceVolumeName D: -DestinationComputerName Server2 -DestinationVolumeName D:
    
  8. To verify that your system is stable, monitor the replication status for at least 24 hours.

  9. For more troubleshooting information, including specialized troubleshooting for Event ID 153, see Data corruption and disk errors troubleshooting guidance.

  10. If issues persist, consider contacting Microsoft Support. To learn about helpful information that you can add to your support request, review Data collection.

Data collection

Before you contact Microsoft Support for assistance, gather the following information from your Windows Server 2025 environment:

  • Event Viewer logs for disk, storage, and replication errors (System, Application, and Microsoft-Windows-StorageReplica/Admin logs).

  • Output from PowerShell cmdlets, such as the following cmdlets:

    Get-PhysicalDisk | Format-Table -AutoSize
    Get-SRGroup
    Get-SRPartnership
    Get-EventLog -LogName System -Newest 100 | Where-Object {$_.Source -like "*disk*" -or $_.Source -like "*storage*"}
    
  • Details of your storage configuration, including RAID levels, disk models, firmware versions, and storage controller information.

  • Screenshots or exports from monitoring tools that show error codes and performance metrics.

  • The steps that you already took to troubleshoot the issue.

References

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors (upstream author metadata: kaushika-msft). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。