大网数据广告活动
网络与域名解析

Fail to open TCP/IP properties of network adapter

· 52CE 我爱测

Resolve an error that occurs when you open the TCP/IP properties of your network adapter.

This article provides help to resolve an error that occurs when you open the TCP/IP properties of your network adapter.

Original KB number:   308939

Symptoms

When you try to open the TCP/IP properties of your network adapter, you may receive the following error message:

Microsoft TCP/IP
In order to configure TCP/IP, you must install and enable a network adapter card.

You may receive this message after a system restoration when your network adapter has been changed before the backup.

Cause

This behavior can occur if your network adapter has been changed to another model of network adapter without first being properly uninstalled by using the Add/Remove Hardware tool in Control Panel. If you then use Ntbackup.exe to restore a full backup of the system with your new network adapter installed, the symptom that is listed in the "Symptoms" section of this article occurs.

Resolution

To resolve this behavior after the restoration process, uninstall the network adapter in Device Manager, and then run the Add/Remove Hardware tool in Control Panel to reinstall the network adapter.

To avoid this behavior before the restoration process, use the Add/Remove Hardware tool in Control Panel to uninstall the first network adapter, physically remove the first network adapter, install your new network adapter, and then create the backup.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。