大网数据广告活动
网络与域名解析

DHCP Server sends a DHCPNAK to clients

· 52CE 我爱测

Provides a solution to an issue when you start a Dynamic Host Configuration Protocol (DHCP) client.

This article provides a solution to an issue when you start a Dynamic Host Configuration Protocol (DHCP) client.

Original KB number:   228597

Symptoms

When you start a Dynamic Host Configuration Protocol (DHCP) client, it tries to renew its lease on an existing IP address for its scope (Requesting state). Or in the case of the client never having an address, it will try to obtain a lease for an IP address for its scope (Initializing state). In the case where there are two or more DHCP servers on the network configured to service this segment, and a DHCP server has the scope for this segment disabled, the client may receive a negative acknowledgment (DHCPNAK) from the DHCP server with the disabled scope. If the client is running Windows NT Server or Workstation, the DHCPNAK would cause an event to be logged to the Windows NT System Event log. It will also increase network traffic and cause the client to needlessly fall back to an Initializing state.

Previous to Windows NT 4.0 Service Pack 4, this behavior wasn't present. It applies to Windows NT 4.0 Service Pack 5 as well.

Resolution

  • Windows NT Server or Workstation 4.0

    To resolve this problem, obtain the latest service pack for Windows NT 4.0 or the individual software update.

    For information on obtaining the individual software update, contact Microsoft Product Support Services.

  • Windows NT Server 4.0, Terminal Server Edition

To resolve this problem, obtain the latest service pack for Windows NT Server 4.0, Terminal Server Edition.

Status

Microsoft has confirmed that it's a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows NT Server version 4.0, Terminal Server Edition Service Pack 6.

More information

Administrators find that configuring two DHCP servers for the same scope then disabling one is an easy way to provide limited fault tolerance.

When the server with the active scope is unavailable, the DHCP server with the deactivated scope will assume the responsibilities for the DHCP clients of that scope.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。