大网数据广告活动
网络与域名解析

DNS zone transfer fails when using Only to servers listed in the Name servers tab

· 52CE 我爱测

Helps resolve an issue in which DNS zone transfer fails when using the Only to servers listed in the Name servers tab setting.

This article helps resolve an issue in which Domain Name System (DNS) zone transfer fails when using the Only to servers listed in the Name servers tab setting.

You configure multiple IP addresses on a network adapter, and the DNS server is configured to listen to all IP addresses. If you allow zone transfers with the Only to server listed on the Name Servers tab option enabled under the Zone Transfers tab of a DNS zone, incremental zone transfer (IXFR) doesn't occur. In addition, when the Notify option is enabled, creating records on the primary server doesn't replicate to the secondary server unless you force Authoritative Transfer (AXFR). When the DNS zone is paused or resumed, you receive the following error message:

Zone Not Loaded by DNS Server  
The DNS server encountered a problem while attempting to load the zone. The transfer of zone data from the master server failed.  
Correct the problem then either press F5, or on the Action menu, click Refresh.  
For more information about troubleshooting DNS zone problems, see Help.  

Change the "Allow zone transfers" setting

To work around this issue, set the Allow zone transfers setting to one of the following options:

  • To any server
  • Only to the following servers

Use zoneresetsecondaries command to set the zone transfers to name servers only option

You can use the following steps to set the zone transfers to name servers only option for the zone.

  1. Close the Microsoft Management Console (MMC).

  2. From an elevated command prompt, run the following command:

    dnscmd <servername> /zoneresetsecondaries <zonename> /securens
    
  3. Wait for 60 seconds, and then open the MMC.

  4. Select Refresh to refresh the settings.

  5. Open the zone transfer settings and check the settings. If the settings are correct, select Cancel and close the MMC.

  6. Wait for 60 seconds and the transfer will be performed successfully.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。