大网数据广告活动
网络与域名解析

install the Microsoft Loopback Adapter

· 52CE 我爱测

This article describes how to install the Microsoft Loopback Adapter. You can use the DevCon utility to quickly install the Microsoft Loopback Adapter at a command prompt, or you can use the Hardware Wizard.

This article describes how to install the Microsoft Loopback Adapter.

Applies to:   Windows Server 2003
Original KB number:   842561

Introduction

This article describes how to install the Microsoft Loopback Adapter in Microsoft Windows Server 2003. You can install the adapter by using a command prompt or by using the Hardware Wizard.

More information

Method 1

To quickly install the Microsoft Loopback Adapter in Microsoft Windows Server 2003, use the DevCon utility at a command prompt. To download and to run the DevCon utility, follow these steps:

  1. Download the DevCon compressed file, and then extract the files:

    1. Visit the following Microsoft Web site:
      Windows Device Console (Devcon.exe)

    2. Save the Devcon.exe file to a folder on your computer, and then open the folder.

    3. Double-click Devcon.exe. A WinZip Self-Extractor dialog box appears.

    4. In the Unzip to path box, type the folder where you want to unzip the files, and then click Unzip.

    5. Click OK, and then Close to complete the unzip process.

  2. Install the Microsoft Loopback Adapter:

    1. At a command prompt, change directory to the folder where you extracted the DevCon files.

    2. Change directory to the i386 folder.

    3. Type devcon.exe install %windir%\inf\netloop.inf *msloop, and then press ENTER. You see output that is similar as:
      Device node created. Install is complete when drivers are updated...
      Updating drivers for *msloop from C:\WINDOWS\inf\netloop.inf.
      Drivers updated successfully.

    4. Close the command prompt.

    5. Click Start, click Control Panel, and then click Network Connections to verify that the Microsoft Loopback Adapter has been installed.

Method 2

To install the Microsoft Loopback Adapter by using the Hardware Wizard, follow these steps:

  1. In Control Panel, double-click Add Hardware, and then click Next

  2. Click Yes, I have already connected the hardware, and then click Next.

  3. At the bottom of the Installed hardware list, click Add a new hardware device, and then click Next.

  4. Click Install the hardware that I manually select from a list, and then click Next

  5. In the Common hardware types list, click Network adapters, and then click Next.

  6. In the Manufacturers list box, click Microsoft.

  7. In the Network Adapter list box, click Microsoft Loopback Adapter, and then click Next.

  8. Click Next to start installing the drivers for your hardware.

  9. Click Finish.

  10. Click Start, click Settings, and then click Network Connections to verify that the Microsoft Loopback Adapter has been installed.

References

For additional information about the DevCon utility, click the following article number to view the article in the Microsoft Knowledge Base:

311272 DevCon command-line utility alternative to Device Manager

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。