This article provides a workaround for an issue where IP address and default gateway settings are assigned incorrectly.
Original KB number: 2473489
Symptoms
On a Windows computer, you may experience one of the following issues:
- IP address and default gateway settings are assigned incorrectly.
- After you configure additional IP addresses, the IP addresses are displayed incorrectly when you run the
ipconfigcommand. - After you restart the computer, IP address settings revert to previous settings.
Cause
These issues occur because of conflicts between TCP/IP registry settings and data that is managed by Network Input Output (NetIO). In Windows Vista or in later versions of Windows, IP address and default gateway settings are managed by both TCP/IP registry settings and NetIO components. TCP/IP registry settings are under the following registry subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip
Workaround
To work around this issue, run the following command to resolve the conflict:
netsh interface ip reset
After you run the command, previous IP address and default gateway settings are reset, and you can reconfigure to the correct settings.
Status
Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
