大网数据广告活动
网络与域名解析

Fail to modify existing DHCP scope

· 52CE 我爱测

Provides solutions to an error that occurs when you modify an existing scope.

This article provides help to fix an error that occurs when you modify an existing scope.

Original KB number:   2634442

Summary

When trying to modify an existing scope, we get the following error:

"The specified range either overlaps an existing range or is not valid".

This seems to be an expected behavior depending on how the DHCP scope is modified. The following line diagram illustrates how the scope can be modified and the allowed method.

Initial Subnet Space: -------------------------

Allowed Expanding on both sides: --------------------------------------

Allowed: Contracting on both sides: --------------

Not Allowed: shifting to the right: --------------------------

Not Allowed: Shifting to the left: --------------------

Resolution

  1. Either ensure that the scope is expanded or contracted both ways or in one direction.
  2. Modify either the start or the endip address one at a time and immediately applying the changes after each and every change to the start or end ip address of the scope.

More information

Following are the steps to reproduce the issue:

Steps to repro the issue

  1. Create a scope called Test with the Start IP = 10.23.228.1 and End IP = 10.23.228.254. The subnet mask is 255.255.240.0 (/20)
  2. Modify the scope by changing the Start ip to 10.23.226.1 and End ip to 10.23.227.254 (This is well within the range 10.23.224.1-10.23.229.254) It Results in the message "The specified range either overlaps an existing range or is not valid".

Resolution

The above scenario falls in the category of "Not Allowed: Shifting to left". So try to modify the range as follows:

  1. Modify the Start IP address alone to 10.23.226.1 and Apply the changes. This will take effect since this falls under the category of Expanding the scope.

  2. Then modify the end ip address to 10.23.227.254 and Apply the changes. This will take effect since it falls under the category of Shrinking or Contracting the scope.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。