大网数据广告活动
网络与域名解析

Overview of Server Message Block signing

· 52CE 我爱测

Describes how to configure SMB signing and how to determine whether SMB signing is enabled.

This article describes Server Message Block (SMB) 2.x and 3.x signing, and how to determine whether SMB signing is required.

Introduction

SMB signing (also known as security signatures) is a security mechanism in the SMB protocol. SMB signing means that every SMB message contains a signature that is generated by using the session key. The client puts a hash of the entire message into the signature field of the SMB header.

SMB signing first appeared in Microsoft Windows 2000, Microsoft Windows NT 4.0, and Microsoft Windows 98. Signing algorithms have evolved over time. SMB 2.02 signing was improved by the introduction of hash-based message authentication code (HMAC) SHA-256, replacing the old MD5 method from the late 1990s that was used in SMB1. SMB 3.0 added AES-CMAC algorithms. In Windows Server 2022 and Windows 11, we added AES-128-GMAC signing acceleration. If you want the best performance and protection combination, consider upgrading to the latest Windows versions.

How SMB signing protects the connection

If someone changes a message during transmission, the hash won't match, and SMB will know that someone tampered with the data. The signature also confirms the sender's and receiver's identities. This prevents relay attacks. Ideally, you are using Kerberos instead of NTLMv2 so that your session key starts strong. Don't connect to shares by using IP addresses and don't use CNAME records, or you will use NTLM instead of Kerberos. Use Kerberos instead. See Using Computer Name Aliases in place of DNS CNAME Records for more information.

Policy locations for SMB signing

The policies for SMB signing are located in Computer Configuration > Windows Settings > Security Settings > Local Policies > Security Options.

  • Microsoft network client: Digitally sign communications (always)
    Registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManWorkstation\Parameters
    Registry value: RequireSecuritySignature
    Data Type: REG_DWORD
    Data: 0 (disable), 1 (enable)
  • Microsoft network client: Digitally sign communications (if server agrees)
    Registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManWorkstation\Parameters
    Registry value: EnableSecuritySignature
    Data Type: REG_DWORD
    Data: 0 (disable), 1 (enable)
  • Microsoft network server: Digitally sign communications (always)
    Registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters
    Registry value: RequireSecuritySignature
    Data Type: REG_DWORD
    Data: 0 (disable), 1 (enable)
  • Microsoft network server: Digitally sign communications (if client agrees)
    Registry key: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanManServer\Parameters
    Registry value: EnableSecuritySignature
    Data Type: REG_DWORD
    Data: 0 (disable), 1 (enable)

Note In these policies, "always" indicates that SMB signing is required, and "if server agrees" or "if client agrees" indicates that SMB signing is enabled.

Understanding "RequireSecuritySignature" and "EnableSecuritySignature"

The EnableSecuritySignature registry setting for SMB2+ client and SMB2+ server is ignored. Therefore, this setting does nothing unless you're using SMB1. SMB 2.02 and later signing is controlled solely by being required or not. This setting is used when either the server or client requires SMB signing. Only if both have signing set to 0 will signing not occur.

- Server – RequireSecuritySignature=1 Server – RequireSecuritySignature=0
Client – RequireSecuritySignature=1 Signed Signed
Client – RequireSecuritySignature=0 Signed Not signed

Reference

Configure SMB Signing with Confidence

How to Defend Users from Interception Attacks via SMB Client Defense

SMB 2 and SMB 3 security in Windows 10: the anatomy of signing and cryptographic keys

SMBv1 is not installed by default in Windows 10 version 1709, Windows Server version 1709 and later versions

Netdom computername

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。