大网数据广告活动
网络与域名解析

Poor network performance on virtual machines

· 52CE 我爱测

Describes an issue that may occur if you have a Windows Server 2012 Hyper-V host that uses a Broadcom network adapter. Provides a workaround.

This article provides a workaround for an issue that occurs if you have a Windows Server 2012 Hyper-V host that uses a Broadcom network adapter.

Original KB number:   2902166

Symptoms

Consider the following scenario:

  • You have a Windows Server 2012 Hyper-V host that uses a Broadcom network adapter.
  • You create a virtual switch that binds to the network adapter.
  • You enable virtual machine queue (VMQ) on the Hyper-V host.

In this scenario, you experience poor network performance on the virtual machines that are hosted on the Hyper-V host.

Cause

This is a known issue with Broadcom network adapter drivers when VMQ is enabled. The following Broadcom network adapters are affected:

  • 57712
  • 57800
  • 57810
  • 57840

Resolution

Broadcom is aware of this issue and will release a driver update to resolve the issue. Until the driver update is available, you can work around the issue by taking one of the following actions:

  • Disable VMQ on the Virtual Network Adapter by using the following Windows PowerShell cmdlet:

    Set-VMNetworkAdapter -ManagementOS -Name <VirtualNetworkAdapterName> -VmqWeight 0
    

    [!NOTE] If the problem is not solved, disable VMQ on the Broadcom network adapter.

  • Change the Media Access Control (MAC) address of the virtual switch.

    [!NOTE] IP address of the Hyper-V host may change if DHCP is used.

If you use System Center Virtual machine Manager (SCVMM), SCVMM can automatically assign a new MAC address.

To manually assign a MAC address, follow these steps:

  1. Assign a MAC address by using the following Windows PowerShell cmdlet:

    Set-VMNetworkAdapter -ManagementOS -Name <VirtualNetworkAdapterName> -StaticMacAddress <MacAddress>
    
  2. Assign a dynamically generated MAC address by using the following Windows PowerShell cmdlet:

    Set-VMNetworkAdapter -ManagementOS -Name <VirtualNetworkAdapterName> -DynamicMacAddress
    
  • If there's another unaffected network adapter on the Hyper-V host, bind the virtual switch to that network adapter.

Third-party information disclaimer

The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, about the performance or reliability of these products.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。