大网数据广告活动
网络与域名解析

Services do not automatically restart on a computer that uses NIC Teaming

· 52CE 我爱测

Resolves a problem in which services do not automatically restart on a computer that uses NIC Teaming.

This article helps to resolves a problem in which services do not automatically restart on a computer that uses NIC Teaming.

Applies to:   Windows Server 2016, Windows Server 2022
Original KB number:   4552864

Symptoms

On a computer that is using NIC (network interface card) Teaming, you notice that several services do not automatically start after the computer restarts.

For example, the SQL Server service does not start automatically. The following entry is logged in the System log:

Log Name: System
Source: Service Control Manager
Date: <date>
Event ID: 7038
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: <computer name>
Description:
The MSSQLxxxx service was unable to log on as xxxxx/xxxxx with the currently configured password due to the following error:
The specified domain either does not exist or could not be contacted.

To ensure that the service is configured properly, use the Services snap-in in Microsoft Management Console (MMC).

Breaking the NIC teaming can fix the problem.

Cause

The following flow shows how the problem occurs:

  • NIC Teaming drivers are controlled by Service Control Manager (SCM). This means that the NIC Teaming drivers are called to start after SCM is started.
  • Individual NIC drivers are not controlled by SCM. Therefore, they can be started and initialized before SCM starts.
  • If NIC Teaming is not configured, an individual NIC can have an IP address configured before any system services start. This is because the NIC doesn't have any service dependency. This causes the IP address to be ready before any service runs.
  • If NIC Teaming is configured, the teaming NIC can be initialized and the IP address and network can be ready only after the services start.
  • By default, after an IP address is added to a NIC, regardless of whether an individual NIC or teaming NIC is being used, it takes three seconds to perform DAD (Duplicate Address detection). After that, the IP address and network are ready.
  • By default, it takes at least three seconds before the network is ready.
  • On a powerful computer, all services can be started within a few seconds (or even one second). Therefore, in a few cases, you might notice that certain services, such as the SQL Server service, cannot start automatically because the network is not yet ready.

Resolution

To fix this problem, use one of the following methods:

  • Set the Startup type of the service to Automatic (Delayed Start).
  • Create a scheduled task to start SQL server service after a computer restart, and set a one-minute delay for the task.
  • Disable DAD on the computer.

If the problem involves SQL Server services, change the SQL services' Recovery properties to Take action on First failure and Restart the Service on Second failure.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。