大网数据广告活动
网络与域名解析

TCP traffic stops

· 52CE 我爱测

Describes a problem that occurs when you enable both receive-side scaling and Internet Connection Sharing. To resolve this problem, disable either receive-side scaling or Internet Connection Sharing.

This article provides a solution to an issue that TCP traffic stops after you enable both receive-side scaling and Internet Connection Sharing.

Applies to:   Windows Vista, Windows Server 2003
Original KB number:   927168

Problem description

After you enable both receive-side scaling and Internet Connection Sharing, TCP traffic stops. For example, the ping command does not work.

This problem occurs if the computer is running one of the following operating systems:

  • Windows Server 2003 with Service Pack 1 (SP1) and the Windows Server 2003 Scalable Networking Pack installed
  • Windows Server 2003 with Service Pack 2 (SP2)
  • Windows Vista

Cause

This problem occurs because receive-side scaling and Internet Connection Sharing are mutually exclusive.

Resolution

To resolve this problem, disable either receive-side scaling or Internet Connection Sharing. Do not enable both receive-side scaling and Internet Connection Sharing at the same time.

How to disable receive-side scaling in Windows Server 2003

To disable receive-side scaling in the network adapter driver in Windows Server 2003, follow these steps:

  1. Click Start, click Run, type ncpa.cpl, and then click OK.
  2. Right-click a network adapter object, and then click Properties.
  3. Click Configure, and then click the Advanced tab.
  4. In the Property list, click Receive Side Scaling, click Disable in the Value list, and then click OK.
  5. Repeat steps 2 through 4 for each network adapter object.

How to determine whether receive-side scaling is enabled in Windows Vista

To determine whether receive-side scaling is enabled in Windows Vista, type the following command at a command prompt:
netsh interface tcp show global

Output will be displayed that resembles the following:

    Querying active state...

    TCP Global Parameters
    ----------------------------------------------
    Receive-Side Scaling State          : enabled
    [...]

How to disable receive-side scaling in Windows Vista

To disable receive-side scaling, you have to type the following command at a command prompt:
netsh interface tcp set global rss=disabled

Fix it for me

If you want us to do this for you automatically, click the Fix this problem link. Then click Run in the File Download dialog box, and follow the steps in this wizard.

Note: This wizard may be in English only; however, the automatic fix also works for other language versions of Windows.

Note: If you are not on the computer that has the problem, you can save the automatic fix to a flash drive or to a CD, and then you can run it on the computer that has the problem.

Status

Microsoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。