大网数据广告活动
性能与资源

Black screen on boot

· 52CE 我爱测

Provides a solution to an issue where restarting a Windows x86-based computer fails with black screen.

This article provides a solution to an issue where restarting a Windows x86-based computer fails with black screen.

Original KB number:   155053

Symptoms

When you restart a Windows x86-based computer, the computer stops with an empty, black screen immediately after the power-on self test (POST) is completed.

Cause

The master boot record (MBR), partition tables, boot sector, or NTLDR file is corrupted.

Resolution

  1. Create a Windows boot disk to start the computer.

    If you can start the computer without errors, the damage is limited to the master boot record (MBR), boot sector, or the NTLDR file. After Windows is running, immediately back up any data of value. Use Disk Administrator to verify that partitions on the boot drive are the correct size. If there are invalid partitions, the best solution is to re-create those partitions and reformat the affected drives, then restore the data from the most recent back up tape. If the system cannot be started from a Windows boot disk, you will most likely have to reinstall Windows and restore from tape.

  2. Run the latest virus scanning software to verify no virus is present. MS-DOS-based virus software is sufficient for this purpose, even if the file system is NTFS. MS-DOS-based virus programs can be run from an MS-DOS boot disk.

  3. Ensure the master boot record (MBR) is valid. Boot from a virus-free MS-DOS version 5.0 or later boot disk with FDISK on it. Run the FDISK /MBR command:

    [!WARNING] If your computer is infected virus, using the FDISK /MBR switch may prevent you from being able to start your computer. Before using the FDISK /MBR command, you should be certain that your computer is not infected with a virus.

  4. If the primary boot partition is a file allocation table (FAT) partition, boot from an MS-DOS disk, perform a SYS C: command to make the drive MS-DOS bootable, and then perform step 5 to replace the Windows boot sector.

  5. Run Windows Setup and choose the Repair option. Choose the Inspect boot Sector and Restore Startup Environment options. If the boot sector on the boot drive is corrupted, this should repair it.

  6. If the system still fails to boot correctly, use Attrib.exe or File Manager to remove the file attributes from the NTLDR file located in the root of the system partition. Copy a new NTLDR file from the i386 directory of the Windows CD-ROM to replace the existing one.

  7. If you are running Windows and the system partition is NTFS, you may have a fragmented MFT that prevents the system from booting.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。