大网数据广告活动
性能与资源

Error 0x7B after you reconfigure hardware devices

· 52CE 我爱测

Discusses that you receive a Stop error (INACCESSIBLE_BOOT_DEVICE) after you reconfigure critical hardware devices.

This article helps fix the Stop error code 0x00000007B that occurs after you reconfigure critical hardware devices.

Original KB number:   3024175

Symptoms

Consider the following scenario:

  • You are using a computer that is running Windows.
  • The operating system includes two drivers that are configured to load at startup. For example, the system includes driverA.sys and driverB.sys, and you expect both to load at startup.
  • When the computer starts, driverA.sys is used in the boot-up process but driverB.sys is not. Therefore, the system reconfigures the Start Type setting for driverB.sys from Boot Start to Demand Start.
  • You change the computer hardware configuration. For example, you replace the PCI slot on an SAS controller to which the boot-up hard disk drive is attached. After you make this change, a device that is required to start the machine may require driverB.sys, which is now set to Demand Start instead of Boot Start.

In this scenario, the system does not load driverB.sys, and STOP Error code 0x00000007B is generated. When this occurs, you receive the following error message:

INACCESSIBLE_BOOT_DEVICE (Stop 0x7B)

Cause

This problem occurs because the system does not support a change in the hardware configuration of devices that are boot critical.

The system has a built-in feature to reduce resource consumption by not loading unnecessary drivers. This feature determines whether a specific driver is set to load automatically at system startup but is not required during startup. If the driver is not required at startup, the system may change the driver to a start type of Demand Start.

Because of this feature, drivers that are necessary to start the system under alternative hardware configurations may be set to Demand Start. If the hardware configuration of the system changes, the system may not find the volume that is necessary to start the system. If this occurs, the Stop error that is mentioned in the "Symptoms" section is generated.

Resolution

To resolve this issue, restart the system in safe mode. In safe mode, any change to a driver's Start Type setting is reversed, and the values are re-created.

More information

For more information about how to troubleshoot Stop error 0x7B, see Troubleshooting a Stop 0x7B in Windows.

Status

This behavior is by design.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。