大网数据广告活动
性能与资源

Manually rebuild performance counters

· 52CE 我爱测

Describes how to manually rebuild performance counters.

This article helps solve an issue where some performance counter libraries become corrupted and need to be rebuilt.

Original KB number:   2554336

Symptoms

When you use the Performance Monitor tool, some counters may be missing or don't contain counter data. The performance counter libraries may become corrupted and need to be rebuilt.

You may see the following errors in the application log:

Log Name: Application  
Source: Microsoft-Windows-IIS-W3SVC-PerfCounters  
Event ID: 2002  
Level: Error  
Keywords: Classic  
Description:  
Setting up Web Service counters failed, please make sure your Web Service counters are registered correctly.
Log Name: Application  
Source: IISInfoCtrs  
Event ID: 1001  
Level: Error  
Keywords: Classic  
Description:  
Unable to read the first counter index value from the registry. The error code returned by the registry is data DWORD 0.

Cause

This behavior may occur if certain extensible counters corrupt the registry, or if Windows Management Instrumentation (WMI)-based programs modify the registry.

Resolution

To resolve this issue, use the following methods.

Ensure that the counters aren't disabled in the registry

The counters may be disabled via registry settings. Check the following registry locations to ensure that the counters haven't been disabled:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\%servicename%\Performance

Note: %servicename% represents any service with a performance counter. For example: PerfDisk, PerfOS, etc.

There may be registry keys for DisablePerformanceCounters in any of these locations. As per the article Disable Performance Counters, this value should be set to 0. If the value is anything other than 0 the counter may be disabled.

  • A value of 1 means the counter is disabled.
  • A value of 2 means the 32-bit counter is disabled.
  • A value of 4 means the 64-bit counter is disabled.

Rebuild all performance counters including extensible and third-party counters

To rebuild all performance counters including extensible and third-party counters, type the following commands at an Administrative command prompt. Press ENTER after each command.

  1. Rebuild the counters:

    cd c:\windows\system32
    lodctr /R
    cd c:\windows\sysWOW64
    lodctr /R
    
  2. Resync the counters with Windows Management Instrumentation (WMI):

    WINMGMT.EXE /RESYNCPERF
    
  3. Stop and restart the Performance Logs and Alerts service.

    Get-Service -Name "pla" | Restart-Service -Verbose
    
  4. Stop and restart the Windows Management Instrumentation service.

    Get-Service -Name "winmgmt" | Restart-Service -Force -Verbose
    
  5. Create a new Data Collector Set (don't use an existing Data Collector Set).

Sometimes, running lodctr /R may not recover all counters. If you notice this happening, verify the file c:\windows\system32\PerfStringBackup.INI contains the proper information. You can copy this file from an identical machine to restore the counters. There may be slight differences in this file from machine to machine. But if you notice a drastic difference in size, it may be missing information. Always create a backup copy before replacing. There's no guarantee that copying this file from another machine will restore all counters. If possible, compare the file to backups of the machine to see if the file size has reduced at some point in time.

For many counters, the location of the ini files to install perf counters is under windows\winsxs, such as the ini files for IIS.

If you see the following errors:

Log Name: Application  
Source: Microsoft-Windows-IIS-W3SVC-PerfCounters  
Event ID: 2002  
Level: Error  
Keywords: Classic  
Description:  
Setting up Web Service counters failed, please make sure your Web Service counters are registered correctly.
Log Name: Application  
Source: IISInfoCtrs  
Event ID: 1001  
Level: Error  
Keywords: Classic  
Description:  
Unable to read the first counter index value from the registry. The error code returned by the registry is data DWORD 0.

You'll need to use the counter install ini files in the directory c:\Windows\winsxs.

Multiple folders may exist for counters that you need to repair. In those cases, you might need to use trial and error to find the correct ini files.

For example,

Dir C:\Windows\winsxs\amd64_microsoft-windows-iis-metabase*

In this example, try installing the infoctrs.ini from each folder using:

Lodtr infoctrs.ini

When it's successful, you'll see the following entry in the application log:

Log Name: Application  
Source: Microsoft-Windows-LoadPerf  
Event ID: 1000  
Level: Information  
Description:  
Performance counters for the inetinfo (inetinfo) service were loaded successfully. The Record Data in the data section contains the new index values assigned to this service.

You need do the same for the following counters:

amd64_microsoft-windows-iis-w3svc*

lodctr w3ctrs.ini

After which you'll see:

Log Name: Application  
Source: Microsoft-Windows-LoadPerf  
Event ID: 1000  
Level: Information  
Description:  
Performance counters for the W3SVC (World Wide Web Publishing Service) service were loaded successfully. The Record Data in the data section contains the new index values assigned to this service.

Following these steps, rerun WINMGMT /RESYNCPERF.

More information

There's a hotfix for known issues with PerfDisk.dll on Windows Server 2008 and Vista systems. This hotfix has been rolled into Service Pack 2 for these operating systems. If you're at Service Pack 1 or below, apply the hotfix 961382.

References

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。