大网数据广告活动
远程桌面与会话

Frame rate is limited to 30 FPS in remote sessions

· 52CE 我爱测

Provides guidance for remote desktop protocols to change the frame rate limit in a remote session.

This article provides a solution for remote desktop protocols to change the frame rate limit in a remote session.

Original KB number:   2885213

Summary

Some remote display protocols, including Remote Desktop Protocol (RDP), don't support a frame rate that is greater than 30 frames per second (FPS).

Setting frame rates

To work around the issue, create a DWMFRAMEINTERVAL entry in registry subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations to change the maximum frame rate limit on the remote session host.

Note: The registry entry that's described in the following procedure sets the maximum frame rate limit that the remote display protocol can deliver to the remote session client to 60 FPS. This setting does not set the actual frame rate for the remote session client. The actual frame rate in the remote session depends on other factors such as application and computer hardware resources. Please contact the remote display protocol providers for more information.

Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For protection, back up the registry before you modify it so that you can restore it if a problem occurs. For more information about how to back up and restore the registry, see How to back up and restore the registry in Windows.

To configure the registry entry, follow these steps:

  1. Start Registry Editor.
  2. Go to the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations
  3. On the Edit menu, select New, and then select DWORD (32-bit) Value.
  4. Type DWMFRAMEINTERVAL, and then press <kbd>Enter</kbd>.
  5. Right-click DWMFRAMEINTERVAL, and select Modify.
  6. Select Decimal, type 15 in the Value data box, and then select OK. This sets the maximum frame rate to 60 FPS.
  7. Exit Registry Editor, and then restart the computer.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。