大网数据广告活动
远程桌面与会话

How to enable Windows Remote Shell

· 52CE 我爱测

Helps you enable Windows Remote Shell.

This article helps you enable Windows Remote Shell.

Applies to:   Windows Server 2003
Original KB number:   555966

This article was written by Yuval Sinay, Microsoft MVP.

Tips

To enable Windows Remote Shell, you need to deploy the server-side and client-side settings:

Server Side

Note: The server definition in the article describes a Windows host that gets into remote management shell.

  1. Log into the Windows console.

  2. Optional (For Windows Vista serves as remote server): Start the service "Windows Remote Management " and set it for auto start after reboot.

  3. Write the command prompt WinRM quickconfig and press the Enter button.

  4. The following output should appear:

    WinRM is not set up to allow remote access to this machine for management.
    The following changes must be made:
    
    Set the WinRM service type to delayed auto start.
    Start the WinRM service.
    Create a WinRM listener on HTTP://* to accept WS-Man requests to any IP on this
    machine.
    
    Make these changes [y/n]? y
    
  5. After pressing the y button, the following output should appear:

    WinRM has been updated for remote management.
    
    WinRM service type changed successfully.
    WinRM service started.
    Created a WinRM listener on HTTP://* to accept WS-Man requests to any IP on this machine.
    

    [!NOTE] We recommend that you change the default settings via the winrm.cmd command (Like enable HTTPS support etc.).

    Windows Remote Shell using SOAP. Some firewalls may block SOAP traffic. For more information, see the vendor documentation.

Client Side

On Windows Vista/Windows 2008 host, use the command winrs -r:%servername% remote command and press the Enter button.

Example: To review remote file system, write the following command:

winrs -r:DC1 dir

Note: In Windows Workgroup environment, there is a need to add a trust for the server that the client initiate a connection to it by using the command winrm set winrm/config/client @{TrustedHosts="%servername1%,"%servername2%"}.

Verify the new settings by using the command winrm enumerate winrm/config/listener.

Community Solutions Content Disclaimer

Microsoft corporation and/or its respective suppliers make no representations about the suitability, reliability, or accuracy of the information and related graphics contained herein. All such information and related graphics are provided "as is" without warranty of any kind. Microsoft and/or its respective suppliers hereby disclaim all warranties and conditions with regard to this information and related graphics, including all implied warranties and conditions of merchantability, fitness for a particular purpose, workmanlike effort, title and non-infringement. You specifically agree that in no event shall Microsoft and/or its suppliers be liable for any direct, indirect, punitive, incidental, special, consequential damages or any damages whatsoever including, without limitation, damages for loss of use, data or profits, arising out of or in any way connected with the use of or inability to use the information and related graphics contained herein, whether based on contract, tort, negligence, strict liability or otherwise, even if Microsoft or any of its suppliers has been advised of the possibility of damages.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。