大网数据广告活动
启动与系统组件

This device cannot start error when deploying a hot plug NVMe SSD

· 52CE 我爱测

Describes an error "This device cannot start" that occurs when you deploy a hot plug NVMe SSD.

Applies to:   Windows Server, version 2004, all editions, Windows Server, version 1903, all editions, Windows Server 2019, all editions, Windows Server 2016, Windows Server 2016 Datacenter, Windows Server 2016 Standard
Original KB number:   4035110

When deploying a hot plug NVM Express (NVMe) solid-state drive (SSD) that supports a maximum payload size (MPS) which is less than the currently configured Peripheral Component Interconnect Express (PCIe) bus MPS, the SSD device cannot be detected or enumerated, and you receive the following error message:

This device cannot start. Try upgrading the device drivers for this device. (Code 10)

All NVMe SSD devices which support hot plug/hot swap capability must support the same (or higher) MPS value as the existing NVMe PCIe bus MPS hierarchy in Windows Server. The PCIe driver cannot dynamically change the existing MPS value of the hierarchy. If a new device is hot plugged to an existing NVMe PCIe bus that doesn't support the MPS value initialized at the boot process, then the detection and enumeration of the device will fail.

Restart the server to initialize the NVMe PCIe bus MPS value to that of the SSD device which has the lowest MPS. Otherwise, contact the system or device manufacturer for further assistance.

Data collection

If you need assistance from Microsoft support, we recommend you collect the information by following the steps mentioned in Gather information by using TSS for deployment-related issues.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。