大网数据广告活动
Windows Server 管理

Remotely edit the registry

· 52CE 我爱测

Describes how to remotely edit the registry of a client computer from a host computer after you use Remote Recover to connect the host computer to the client computer.

This article describes how to remotely edit the registry of a client computer from a host computer after you use Remote Recover to connect the host computer to the client computer.

Original KB number:   934958

Introduction

Important: This article contains information about how to modify the registry. Make sure that you back up the registry before you modify it. Make sure that you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, see Windows registry information for advanced users.

Note: Remote Recover is a component of Winternals Administrator's Pak.

More information

Warning: Serious problems might occur if you modify the registry incorrectly by using Registry Editor or by using another method. These problems might require that you reinstall the operating system. Microsoft can't guarantee that these problems can be solved. Modify the registry at your own risk.

Note: To remotely edit the registry of a client computer, the following conditions must be true for the client computer and for the host computer:

  • The computers must run the same operating system.
  • The computers must have the same service pack installed.

To remotely edit the registry of a client computer from a host computer, follow these steps:

  1. On the host computer, start Registry Editor.

  2. Locate the following subtree, and then select it:
    HKEY_LOCAL_MACHINE

  3. On the File menu, select Load Hive.

  4. Locate and then select the registry hive on the client computer that you want to edit.

    [!NOTE] The registry hive is located in the %Windir%\System32\Config folder as one of the following files:

    • SAM represents the Sam hive.
    • SECURITY represents the Security hive.
    • SOFTWARE represents the Software hive.
    • SYSTEM represents the System hive.
  5. Select Open.

  6. In the Load Hive dialog box, type a name in the Key Name box for the registry hive that you want to edit.

  7. Edit the registry keys.

    [!NOTE] In step 7, you can edit the registry keys because they're now part of the registry of the host computer.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。