大网数据广告活动
账户与安全

Can't sign in to a domain controller and the LSASS process stops responding

· 52CE 我爱测

Helps to fix the issue in which you can't sign in to a domain controller, and the Local Security Authority Subsystem Service (LSASS) process stops responding.

This article helps fix the issue in which you can't sign in to a domain controller, and the Local Security Authority Subsystem Service (LSASS) process stops responding.

Applies to:   Windows Server
Original KB number:   3144809

You can't sign in to a domain controller after reboot, and you experience the following scenarios:

  • You can type the username and password in the sign-in screen, but when you press <kbd>Enter</kbd>, nothing happens.
  • The sign-in doesn't proceed without errors.
  • If you disconnect the network interface card (NIC), you can sign in with cached credentials.
  • The LSASS process stops responding or has stopped responding recently.
  • Many services can't start due to a sign-in failure.

When this issue occurs, the system event log may contain one or more of the following events:

Event log Event source ID Message text
System LsaSrv 5000 The security package NTLM generated an exception. The exception information is the data.ORThe security package MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 generated an exception. The exception information is the data.The extended error is E0010014
System LsaSrv 6038 Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and this server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
System Application Popup 26 Application popup: lsass.exe - Application Error : The exception unknown software exception (0xe0010004) occurred in the application at location 0x90cf8b9c.
System User32 1074 The process wininit.exe has initiated the restart of computer <DC> on behalf of user for the following reason:No title for this reason could be found.Reason Code: 0x50006Shutdown Type: restartComment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -536805372. The system will now shut down and restart.
System Service Control Manager 7038 The <Service Name> service was unable to log on as NT AUTHORITY\SYSTEM with the currently configured password due to the following error: The RPC server is unavailable.
System Service Control Manager 7000 The <Service Name> service failed to start due to the following error: The service did not start due to a logon failure.
System Microsoft-Windows-Time-Service 46 The time service encountered an error and was forced to shut down. The error was: 0x80070721: A security package specific error occurred.
System Service Control Manager 7023 The IPsec Policy Agent service terminated with the following error: The authentication service is unknown.
System Netlogon 5774 The dynamic registration of the DNS record '<DNS Record>' failed on the following DNS server: DNS server IP address: <DNS ServerIP> Returned Response Code (RCODE): 5 Returned Status Code: 9017 ... ADDITIONAL DATA Error Value: DNS bad key.

You may also find errors in the event trace log (ETL) or the memory dump analysis:

Error Log and comment
DSA_DB_EXCEPTIONError code: 0xfffff9bf (4294965695):JET_errRecordNotFound - esent.h: /* The key was not found */ LSASS exception crash dump
C:\tools>err -536805372# for decimal -536805372 / hex 0xe0010004DSA_DB_EXCEPTION dsexcept.h User32 Event status code
[1]035C.0160::02/23/16-13:26:11.0878836 [Microsoft-Windows-Shell-AuthUI-Common/Diagnostic ] DWORD1=2147943515, DWORD2=0 Shell-AuthUI ETLError code: (HRESULT) 0x8007045b (2147943515) - A system shutdown is in progress."This error is coming from this global setting and I see this set in all the dumps.0: kd> dt lsasrv!ShutdownBegun"
NetLogon:LogonSAMPauseResponseEX (SAM Response when Netlogon is paused): 24 (0x18) Network trace

The Password Settings Container is moved or missing

In Windows Server 2012 and later versions, the authentication process makes a function call to determine fine-grained password policies, and it looks for the Password Settings Container. If it isn't present under cn=system,dc=<domain>,dc=<com> in the Active Directory domain naming context, or it's in an incorrect location, the sign-in fails.

Note: The Password Settings Container is a default system container that should always be present. This container is created as part of Adprep for Windows Server 2008 and later versions' domain controllers to support fine-grained password policies.

Move the container to the correct location or rerun Adprep

If the Password Settings Container is in the incorrect location, follow these steps:

  1. Run the following command to search for the container:

    repadmin /showattr . ncobj:domain: /filter:"(objectclass=msds-PasswordSettingsContainer)" /subtree
    

    [!NOTE] You can run the repadmin /showobj command to check when the container was last modified.

  2. Open the LDP tool and select Browse > Modify RDN to move the object to the correct location under the system container.

If the Password Settings Container doesn't exist, follow these steps:

  1. Sign in to the Infrastructure master as a domain admin.

  2. Create a .txt file with the following text:

    dn: CN=ActiveDirectoryUpdate,CN=DomainUpdates,CN=System,DC=contoso,dc=com
    changetype: modify
    replace: revision
    revision: 1
    
  3. Open an elevated command prompt, and run the ldifde command to import the file.

    ldifde -i -f <File Name>
    
  4. In the LDP tool or the Active Directory Service Interface (ADSI) Editor tool, delete the containers of the operations you need to rerun. For example:

    cn=71482d49-8870-4cb3-a438-b6fc9ec35d70,cn=Operations,cn=DomainUpdates,cn=System,DC=fia,DC=local.

  5. Run the adprep /domainprep command.

You can check the ADPrep.log file (C:\Windows\debug\adprep\logs\<Date Time>\ADPrep.log) to verify the result.

Note: Windows Server 2019 and later versions have an update that prevents the LSASS process from stopping responding.

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。