大网数据广告活动
账户与安全

KDC service on an RODC can't start and generates error 1450

· 52CE 我爱测

This article resolves an issue in which the KDC service on a read-only domain controller (RODC) cannot start, and you receive an error message that refers to insufficient system resources.

This article resolves an issue in which the KDC service on a read-only domain controller (RODC) cannot start, and you receive an error message that refers to insufficient system resources.

Applies to:   Windows Server 2016

Symptoms

The Kerberos Key Distribution Center (KDC) service does not start on a read-only domain controller (RODC), and the service generates the following error message:

Windows could not start the Kerberos Key Distribution Center service on Local Computer. Error 1450: Insufficient system resources exist to complete the requested service.

If you use a command such as repadmin /replicate to trigger inbound replication to the RODC from a source domain controller, the command fails and generates the following error message:

DsReplicaSync() failed with status 6 (0x6):
The handle is invalid.

Cause

The krbtgt_##### account for the RODC was removed.

Every RODC has its own krbtgt_##### account in Active Directory. In the account name, ##### represents a number that identifies the RODC. The RODC uses this account to provide cryptographic isolation for the tickets that it issues. Typically, you don't have to interact with the krbtgt_##### accounts. When you promote or demote an RODC, Windows automatically manages the accounts. However, if an RODC fails and the metadata isn't cleaned up, an "orphan" krbtgt_##### account may remain in Active Directory.

If an administrator tries to manually clean up orphan accounts, the issue that's mentioned in the "Symptoms" section may occur. This issue typically means that a non-orphan krbtgt_##### account was deleted instead of an orphan account.

For information about how to identify orphan krbtgt_##### accounts, see MailBag: RODCs – krbtgt_#####, Orphans, and Load Balancing RODC Connection Objects.

Resolution

The procedure that you use to resolve this issue depends on whether you have enabled the AD Recycle Bin feature in Active Directory. Select one of the following methods:

Recovery Method 1 (AD Recycle Bin feature not enabled)

If the AD Recycle Bin feature wasn't enabled, follow these steps on a writeable domain controller (RWDC) or global catalog server (GC).

  1. Restart the server. During the startup process, press F8, and then select Directory Services Restore Mode.

  2. Use a system state backup from before the account was removed to restore the system state of the server. This operation returns the account to the local copy of Active Directory on the server.

  3. Open an elevated Command Prompt window, and use the ntdsutil tool to do an authoritative restore of the account. This operation makes sure that the restored account can replicate to the other domain controllers.

    For example, to restore an account that has the name krbtgt_23530, you would open an elevated Command Prompt window, and run the following command:

    ntdsutil restore object "CN=krbtgt_23530,CN=Users,DC=EMEA,DC=Contoso,DC=com"
    

    [!NOTE]
    The authoritative restore operation creates an LDAP Data Interchange Format (LDIF) file that contains information from the restored account. You will need this file in later steps.

  4. Restart the server to return to normal Active Directory mode.

  5. Populate the backlink attributes for the restored account by importing the LDIF file that was created in the previous step. To do this, run the following command at a command prompt:

    ldifde -i -f <filename>.ldf
    

    In this command, <filename> is the file name and path of the LDIF file that was created previously. This operation links the RODC computer object in Active Directory to its corresponding account.

After you finish these steps, you may have to reset the password of the RODC computer account (also known as the "machine account"). To do this, follow the steps in Use Netdom.exe to reset machine account passwords of a Windows Server domain controller.

Recovery Method 2 (AD Recycle Bin feature enabled)

If the AD Recycle Bin feature is enabled, follow these steps.

  1. On an RWDC or GC, in an elevated Command Prompt window, run the following commands to restore the account:

    import-module ActiveDirectory
    Get-ADObject -Filter {displayName -eq "krbtgt_<xxxxx>"} -IncludeDeletedObjects | Restore-ADObject
    

    In the second command, <xxxxx> is the ID number of the RODC.

  2. On the affected RODC, open an elevated Command Prompt window and then run the following command to replicate the account information to the RODC:

    repadmin /replsingleobj <RODC_Name> <RWDC_Name> <DN>
    

    This command contains the following placeholders:

    • <RODC_Name> represents the server name of the RODC
    • <RWDC_Name> represents the RWDC, on which you restored the account
    • <DN> represents the distinguished name of the RODC account (krbgt_xxxxx)
  3. Clear the RODC Kerberos cache by running the following commands:

    klist purge
    klist -li 0x3e7 purge
    
  4. Reset the password of the RODC computer account (also known as the "machine account") by running the following command:

    netdom resetpwd /server: <RWDC_Name> /USERD: administrator /PasswordD:*
    

    In this command, <RWDC_Name> represents the server name of the RWDC.

    [!NOTE]
    This command prompts you for the password of the Administrator account.

  5. Restart the RODC.

References

Source: Microsoft Learn / IT Pro troubleshooting by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / IT Pro troubleshooting
适用范围
- Supported versions of Windows Server · Source date 02/12/2026
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。