大网数据广告活动
Windows Server 管理

Detecting bottlenecks in a virtualized environment

· 52CE 我爱测

How to detect and resolve potential Hyper-v performance bottlenecks

This section should give you some hints on what to monitor by using Performance Monitor and how to identify where the problem might be when either the host or some of the virtual machines do not perform as you would have expected.

Processor bottlenecks

Here are some common scenarios that could cause processor bottlenecks:

  • One or more logical processors are loaded

  • One or more virtual processors are loaded

You can use the following performance counters from the host:

  • Logical Processor Utilization - \Hyper-V Hypervisor Logical Processor(*)\% Total Run Time

  • Virtual Processor Utilization - \Hyper-V Hypervisor Virtual Processor(*)\% Total Run Time

  • Root Virtual Processor Utilization - \Hyper-V Hypervisor Root Virtual Processor(*)\% Total Run Time

If the Hyper-V Hypervisor Logical Processor(_Total)\% Total Runtime counter is over 90%, the host is overloaded. You should add more processing power or move some virtual machines to a different host.

If the Hyper-V Hypervisor Virtual Processor(VM Name:VP x)\% Total Runtime counter is over 90% for all virtual processors, you should do the following:

  • Verify that the host is not overloaded

  • Find out if the workload can leverage more virtual processors

  • Assign more virtual processors to the virtual machine

If Hyper-V Hypervisor Virtual Processor(VM Name:VP x)\% Total Runtime counter is over 90% for some, but not all, of the virtual processors, you should do the following:

  • If your workload is receive network-intensive, you should consider using vRSS.

  • If the virtual machines are not running Windows Server 2012 R2, you should add more network adapters.

  • If your workload is storage-intensive, you should enable virtual NUMA and add more virtual disks.

If the Hyper-V Hypervisor Root Virtual Processor (Root VP x)\% Total Runtime counter is over 90% for some, but not all, virtual processors and the Processor (x)\% Interrupt Time and Processor (x)\% DPC Time counter approximately adds up to the value for the Root Virtual Processor(Root VP x)\% Total Runtime counter, you should ensure enable VMQ on the network adapters.

Memory bottlenecks

Here are some common scenarios that could cause memory bottlenecks:

  • The host is not responsive.

  • Virtual machines cannot be started.

  • Virtual machines run out of memory.

You can use the following performance counters from the host:

  • Memory\Available Mbytes

  • Hyper-V Dynamic Memory Balancer (*)\Available Memory

You can use the following performance counters from the virtual machine:

  • Memory\Available Mbytes

If the Memory\Available Mbytes and Hyper-V Dynamic Memory Balancer (*)\Available Memory counters are low on the host, you should stop non-essential services and migrate one or more virtual machines to another host.

If the Memory\Available Mbytes counter is low in the virtual machine, you should assign more memory to the virtual machine. If you are using Dynamic Memory, you should increase the maximum memory setting.

Network bottlenecks

Here are some common scenarios that could cause network bottlenecks:

  • The host is network bound.

  • The virtual machine is network bound.

You can use the following performance counters from the host:

  • Network Interface(network adapter name)\Bytes/sec

You can use the following performance counters from the virtual machine:

  • Hyper-V Virtual Network Adapter (virtual machine name name<GUID>)\Bytes/sec

If the Physical NIC Bytes/sec counter is greater than or equal to 90% of capacity, you should add additional network adapters, migrate virtual machines to another host, and configure Network QoS.

If the Hyper-V Virtual Network Adapter Bytes/sec counter is greater than or equal to 250 MBps, you should add additional teamed network adapters in the virtual machine, enable vRSS, and use SR-IOV.

If your workloads can't meet their network latency, enable SR-IOV to present physical network adapter resources to the virtual machine.

Storage bottlenecks

Here are some common scenarios that could cause storage bottlenecks:

  • The host and virtual machine operations are slow or time out.

  • The virtual machine is sluggish.

You can use the following performance counters from the host:

  • Physical Disk(disk letter)\Avg. disk sec/Read

  • Physical Disk(disk letter)\Avg. disk sec/Write

  • Physical Disk(disk letter)\Avg. disk read queue length

  • Physical Disk(disk letter)\Avg. disk write queue length

If latencies are consistently greater than 50ms, you should do the following:

  • Spread virtual machines across additional storage

  • Consider purchasing faster storage

  • Consider Tiered Storage Spaces, which was introduced in Windows Server 2012 R2

  • Consider using Storage QoS, which was introduced in Windows Server 2012 R2

  • Use VHDX

Additional References

Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Server documentation
适用范围
Windows Server · Source date 10/16/2017
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。