大网数据广告活动
Windows排障命令

diskcomp

· 52CE 我爱测

Reference article for the diskcomp command, which compares the contents of two floppy disks.

Compares the contents of two floppy disks. If used without parameters, diskcomp uses the current drive to compare both disks.

Syntax

diskcomp [<drive1>: [<drive2>:]]

Parameters

Parameter Description
<drive1> Specifies the drive containing one of the floppy disks.
/? Displays help at the command prompt.
Remarks
  • The diskcomp command works only with floppy disks. You cannot use diskcomp with a hard disk. If you specify a hard disk drive for drive1 or drive2, diskcomp displays the following error message:

    Invalid drive specification
    Specified drive does not exist
    or is nonremovable
    
  • If all tracks on the two disks being compared are the same (it ignores a disk's volume number), diskcomp displays the following message:

    Compare OK
    

    If the tracks aren't the same, diskcomp displays a message similar to the following:

    Compare error on
    side 1, track 2
    

    When diskcomp completes the comparison, it displays the following message:

    Compare another diskette (Y/N)?
    

    If you press Y, diskcomp prompts you to insert the disk for the next comparison. If you press N, diskcomp stops the comparison.

  • If you omit the drive2 parameter, diskcomp uses the current drive for drive2. If you omit both drive parameters, diskcomp uses the current drive for both. If the current drive is the same as drive1, diskcomp prompts you to swap disks as necessary.

  • If you specify the same floppy disk drive for drive1 and drive2, diskcomp compares them by using one drive and prompts you to insert the disks as necessary. You might have to swap the disks more than once, depending on the capacity of the disks and the amount of available memory.

  • Diskcomp can't compare a single-sided disk with a double-sided disk, nor a high-density disk with a double-density disk. If the disk in drive1 isn't of the same type as the disk in drive2, diskcomp displays the following message:

    Drive types or diskette types not compatible
    
  • Diskcomp doesn't work on a network drive or on a drive created by the subst command. If you attempt to use diskcomp with a drive of any of these types, diskcomp displays the following error message:

    Invalid drive specification
    
  • If you use diskcomp with a disk that you made by using copy, diskcomp might display a message similar to the following:

    Compare error on
    side 0, track 0
    

    This type of error can occur even if the files on the disks are identical. Although copy duplicates information, it doesn't necessarily place it in the same location on the destination disk.

  • diskcomp exit codes:

    Exit code Description
    0 Disks are the same
    1 Differences were found
    3 Hard error occurred
    4 Initialization error occurred

    To process exit codes that are returned by diskcomp, you can use the ERRORLEVEL environment variable on the if command line in a batch program.

Examples

If your computer has only one floppy disk drive (for example, drive A), and you want to compare two disks, type:

diskcomp a: a:

Diskcomp prompts you to insert each disk, as needed.

To illustrates how to process a diskcomp exit code in a batch program that uses the ERRORLEVEL environment variable on the if command line:

rem Checkout.bat compares the disks in drive A and B
echo off
diskcomp a: b:
if errorlevel 4 goto ini_error
if errorlevel 3 goto hard_error
if errorlevel 1 goto no_compare
if errorlevel 0 goto compare_ok
:ini_error
echo ERROR: Insufficient memory or command invalid
goto exit
:hard_error
echo ERROR: An irrecoverable error occurred
goto exit
:break
echo You just pressed CTRL+C to stop the comparison
goto exit
:no_compare
echo Disks are not the same
goto exit
:compare_ok
echo The comparison was successful; the disks are the same
goto exit
:exit

Related links

Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Server documentation
适用范围
Windows Server · Source date 10/16/2017
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。