The netsh bridge command configures network adapter bridge settings in Windows. By creating a network bridge, you can link two or more network segments, allowing devices on separate segments to communicate seamlessly as if they're part of a single network.
Syntax
netsh bridge [add | create | destroy | dump | help | list | remove | set | show | ?]
netsh bridge add <Adapter ID> to <Bridge GUID>
netsh bridge create [<Adapter ID #1> <Adapter ID #2>]
netsh bridge destroy <Bridge GUID>
netsh bridge list
netsh bridge remove <Adapter ID> from <Bridge GUID>
netsh bridge remove all from <Bridge GUID>
netsh bridge set adapter [id=]<integer> [[forcecompatmode=]enable|disable]
netsh bridge show adapter
Parameters
| Command | Description |
|---|---|
bridge add |
Adds a network adapter, specified by its Adapter ID, to an existing bridge identified by its Bridge GUID. |
bridge create |
Creates a new network bridge that includes two specified network adapters. The newly created bridge is assigned its own unique GUID, which can be retrieved using the netsh bridge list command. |
bridge destroy |
Removes all network adapters from the specified bridge, identified by its bridge GUID, and deletes the bridge. |
bridge dump |
Creates a script containing the current context configuration. The script can be saved to a file and used to restore settings if they're altered or need to be replicated on another system. |
bridge list |
Displays all the created bridges that are uniquely identified by the bridge GUID. |
bridge remove |
Removes a network adapter, specified by its Adapter ID, from a bridge identified by its Bridge GUID. Using the all parameter removes all network adapters from the specified bridge and deletes the bridge. |
bridge set adapter |
Modifies the bridge configuration for the specified adapter. id - The identifier of the network adapter to configure. To view available adapter IDs, use the netsh bridge show adapter command. forcecompatmode - Specifies whether to enable or disable Layer 3 compatibility mode for the adapter: - enable: Turns on Layer 3 mode. - disable: Turns off Layer 3 mode. |
bridge show adapter |
Displays a list of all available network adapters, including their Adapter IDs, current settings, and status flags, indicating which adapters can participate in a network bridge. |
help or ? |
Displays a list of commands and their descriptions in the current context. |
Examples
To add a network adapter (Adapter ID 3) to an existing bridge, with Bridge GUID {12345678-ABCD-EF01-2345-6789ABCDEF03}, run the following command:
netsh bridge add adapter=3 bridge={12345678-ABCD-EF01-2345-6789ABCDEF03}
To create a new network bridge with two adapters (Adapter ID 1 and Adapter ID 2), run the following command:**
netsh bridge create adapter=1 adapter=2
To destroy a bridge and remove all its adapters (Bridge GUID {12345678-ABCD-EF01-2345-6789ABCDEF02}), run the following command:
netsh bridge destroy bridge={12345678-ABCD-EF01-2345-6789ABCDEF02}
To display all created network bridges and their GUIDs, run the following command:
netsh bridge list
To remove a network adapter (Adapter ID 2) from an existing bridge, with Bridge GUID {12345678-ABCD-EF01-2345-6789ABCDEF02}, run the following command:
netsh bridge remove adapter=2 bridge={12345678-ABCD-EF01-2345-6789ABCDEF02}
To display all available network adapters, run the following command:
netsh bridge show adapter
To modify an adapter (Adapter ID 1) in a bridge to enable Layer 3 compatibility mode, run the following command:
netsh bridge set adapter id=1 forcecompatmode=enable
See also
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
