Active Directory Full Server Recovery
A full server recovery is necessary if you're restoring to different hardware or a different operating system instance. Bare-Metal recovery is a supported method of backup.
Keep in mind the following:
- The number drives on the target server needs to be equal to the number in the backup and they need to be the same size or greater.
- The target server needs to be started from the operating system DVD in order to access Windows PE Environment, and using the Repair your computer option.
- If you're using disk volume encryption solutions like BitLocker, make sure you test and apply the steps necessary to the server recovery plan for getting the server OS restored and started properly.
- If the target DC is running in a VM on Hyper-V and the backup is stored on a network location, you must install a legacy network adapter, with all isolation precautions needed depending on your recovery scenario.
- After you perform a full server recovery, you need to separately perform an authoritative restore of SYSVOL, as described in AD Forest Recovery - Performing an authoritative synchronization of DFSR-replicated SYSVOL.
Depending on your scenario, use one of the following procedures to perform a full restore.
Perform a full server restore with a healthy local backup using the latest image
- Start Windows Setup, specify the Language, Time and currency format, and keyboard options and select Next.
- Select Repair your computer. :::image type="content" source="media/553721c65252ea0a039ff206a8bf43bb.png" alt-text="Screenshot that shows where to select Repair your computer.":::
- Select Troubleshoot.
:::image type="content" source="media/1cb2ace61dcdf29fb39fceb5309c5376.png" alt-text="Screenshot that shows the Troubleshoot option."::: - Select System Image Recovery.
:::image type="content" source="media/dbc1f945041dca0edb7967de8907d726.png" alt-text="Screenshot that shows the System Image Recovery option."::: - Select Windows Server 2016. :::image type="content" source="media/799b14685522d334e3bba855a025e94a.png" alt-text="Screenshot that shows the Windows Server 2016 option.":::
- If you're restoring the most recent local backup, select Use the latest
available system image (recommended) and select Next.
[!NOTE] If you need to select a backup from another time as the problem was introduced was introduced some time ago, select "Select a system image" and chose the known good backup. :::image type="content" source="media/6fed751a5b8ca6c0b343cbb3fc8679c5.png" alt-text="Screenshot that shows the Use the latest available system image (recommended) option.":::
- You'll now be given an option to:
- Format and repartition disks.
- Install drivers.
- Deselecting the Advanced features of automatically restarting and checking for disk errors. These are enabled by default. :::image type="content" source="media/66a6821db9ede980c7c1ae615a9d3128.png" alt-text="Screenshot that highlights the Advanced... button.":::
- Select Next.
- Select Finish. You'll be prompted if you're sure you want to continue. Select Yes. :::image type="content" source="media/379d865f820f6d2fa20f0d78c283bc87.png" alt-text="Screenshot that shows the progress of the image restoration.":::
- Once this completes, perform an authoritative restore of SYSVOL, as described in AD Forest Recovery - Performing an authoritative synchronization of DFSR-replicated SYSVOL.
Perform a full server restore with any image local or remote
- Start Windows Setup, specify the Language, Time and currency format, and keyboard options and select Next.
- Select Repair your computer.
- Select Troubleshoot, select System Image Recovery, and select Windows Server 2016.
- If you're restoring the most recent local backup, select Select a system image and select Next.
- Now you can select the location of the backup that you want to restore. If the image is local, you can select it from the list.
- If the image is on a network share, select Advanced. You can also select Advanced if you need to install a driver. :::image type="content" source="media/dffb0ae6bfebd201e0c2b6b947df034d.png" alt-text="Screenshot that highlights the Advanced button in the Re-image your computer dialog box.":::
- If you're restoring from the network after clicking Advanced select Search for a system image on the network. You may be prompted to restore network connectivity. Select Ok.
:::image type="content" source="media/e07bdbc646362ef4642b9994e96c5e69.png" alt-text="Screenshot that highlights the Search for a system image on the network option."::: - Type the UNC path to the backup share location (for example,
\\\\server1\\backups) and select OK. You can also type the IP address of the target server, such as\\\\192.168.1.3\\backups. :::image type="content" source="media/e08571ed9738be2cac0b352213c80353.png" alt-text="Server Restore"::: - Type credentials necessary to access the share and select OK.
- Now Select the date and time of system image to restore and select Next.
- You'll now be given an option to:
- Format and repartition disks.
- Install drivers.
- Deselecting the Advanced features of automatically restarting and checking for disk errors. These are enabled by default.
- Select Next.
- Select Finish. You'll be prompted asking if you're sure you want to continue. Select Yes.
- Once this completes, perform an authoritative restore of SYSVOL, as described in AD Forest Recovery - Performing an authoritative synchronization of DFSR-replicated SYSVOL.
Enable the network adapter for a network backup
If you need to enable a network adapter from the command prompt to restore from a network share, use the following steps.
-
Start Windows Setup, specify the Language, Time and currency format, and keyboard options and select Next.
-
Select Repair your computer. I
-
Select Troubleshoot, select Command Prompt.
-
Type the following command and press ENTER:
wpeinit -
To confirm the name of the network adapter, type:
show interfaces -
Type the following commands and press ENTER after each command:
netshinterfacetcpipv4set address "Name of Network Adapter" static IPv4 Address SubnetMask IPv4 Gateway Address 1For example:
set address "Local Area Connection" static 192.168.1.2 255.0.0.0 192.168.1.1 1 -
Type
quitto return to a command prompt. -
Type
ipconfig /allto verify the network adapter has an IP address and try to ping the IP address of the server that hosts the backup share to confirm connectivity. -
Close the command prompt when you're done.
-
Now that the network adapter is working, repeat the steps above to complete the restore.
Next steps
- AD Forest Recovery - Prerequisites
- AD Forest Recovery - Devise a custom forest recovery plan
- AD Forest Recovery - Steps to restore the forest
- AD Forest Recovery - Identify the problem
- AD Forest Recovery - Determine how to recover
- AD Forest Recovery - Perform initial recovery
- AD Forest Recovery - Procedures
- AD Forest Recovery - Frequently Asked Questions (FAQ)
- AD Forest Recovery - Recover a single domain within a multidomain forest
- AD Forest Recovery - Redeploy remaining DCs
- AD Forest Recovery - Virtualization
- AD Forest Recovery - Cleanup
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
