EDGE2 is the second member of a Remote Access cluster. EDGE2 is installed and configured before enabling the cluster configuration.
Perform the following steps to configure EDGE2:
<a name="installOS"></a>Install the operating system on EDGE2
-
On EDGE2, start the installation of Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 .
-
Follow the instructions to complete the installation, specifying Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 (full installation) and a strong password for the local Administrator account. Log on using the local Administrator account.
-
Connect EDGE2 to a network that has Internet access and run Windows Update to install the latest updates for Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 , and then disconnect from the Internet.
-
Connect one network adapter to the Corpnet subnet or the virtual switch representing the corpnet subnet and the other to the Internet subnet or virtual switch representing the Internet subnet.
<a name="TCP"></a>Configure TCP/IP properties
-
In the Server Manager console, click Local Server, and then in the Properties area, next to Wired Ethernet Connection, click the link.
-
In the Network Connections window, right-click the network connection that is connected to the Corpnet subnet or virtual switch, and then click Rename.
-
Type Corpnet, and then press ENTER.
-
Right-click Corpnet, and then click Properties.
-
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
-
Click Use the following IP address. In IP address, type 10.0.0.8. In Subnet mask, type 255.255.255.0.
-
Click Use the following DNS server addresses. In Preferred DNS server, type 10.0.0.1.
-
Click Advanced, and then click the DNS tab.
-
In DNS suffix for this connection, type corp.contoso.com, click OK twice.
-
Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
-
Click Use the following IPv6 address. In IPv6 address, type 2001:db8:1::8. In Subnet prefix length, type 64.
-
Click Use the following DNS server addresses. In Preferred DNS server, type 2001:db8:1::1.
-
Click Advanced, and then click the DNS tab.
-
In DNS suffix for this connection, type corp.contoso.com, click OK twice, and then click Close.
-
In the Network Connections window, right-click the network connection that is connected to the Internet subnet, and then click Rename.
-
Type Internet, and then press ENTER.
-
Right-click Internet, and then click Properties.
-
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
-
Click Use the following IP address. In IP address, enter 131.107.0.8. In Subnet mask, enter 255.255.255.0.
-
Click the DNS tab
-
In DNS suffix for this connection, type isp.example.com, and then click OK twice, and then click Close.
-
Close the Network Connections window.
-
To check network communication between EDGE2 and DC1, click Start, type cmd, and then press ENTER.
-
In the Command Prompt window, type ping dc1.corp.contoso.com and press ENTER. Verify that there are four responses from 10.0.0.1 or the IPv6 address 2001:db8:1::1
-
Close the Command Prompt window.
<a name="rename"></a>Rename EDGE2 and join it to the domain
-
In the Server Manager console, in Local Server, in the Properties area, next to Computer name, click the link.
-
On the System Properties dialog box, on the Computer Name tab, click Change.
-
On the Computer Name/Domain Changes dialog box, in the Computer name box, type EDGE2. In the Member of area, click Domain, and in the text box, enter corp.contoso.com, and then click OK.
-
When you are prompted for a user name and password, type User1 and its password, and then click OK.
-
When you see a dialog box welcoming you to the corp.contoso.com domain, click OK.
-
When you are prompted that you must restart the computer, click OK.
-
On the System Properties dialog box, click Close.
-
When you are prompted to restart the computer, click Restart Now.
-
After restarting, login as CORP\User1.
<a name="IPHTTPSCert"></a>Install the IP-HTTPS certificate
-
On the Start screen, typemmc.exe, and then press ENTER. If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Yes.
-
In the MMC console, on the File menu, click Add/Remove Snap-in.
-
On the Add or Remove Snap-ins dialog box, click Certificates, click Add, click Computer account, click Next, click Finish, and then click OK.
-
In the left pane of the console, navigate to Certificates (Local Computer)\Personal\Certificates. Right click the Certificates node, point to All Tasks, and then click Request New Certificate.
-
On the Certificate Enrollment wizard, click Next twice.
-
On the Request Certificates page, select the Web Server check box, and then click More information is required to enroll for this certificate.
-
On the Certificate Properties dialog box, on the Subject tab, in the Subject name area, in the Type list, click Common Name.
-
In Value, type edge1.contoso.com, and then click Add.
-
In the Alternative name area, in the Type list, click DNS.
-
In Value, type edge1.contoso.com, and then click Add.
-
On the General tab, in Friendly name, type IP-HTTPS Certificate.
-
Click OK, click Enroll, and then click Finish.
-
In the details pane of the Certificates snap-in, verify that a new certificate with the name edge1.contoso.com was enrolled with Intended Purposes of Server Authentication.
-
Close the console window. If you are prompted to save settings, click No.
<a name="InstallDA"></a>Install the Remote Access role on EDGE2
-
In the Server Manager console, in the Dashboard, click Add roles and features.
-
Click Next three times to get to the server role selection screen.
-
On the Select server roles dialog, select Remote Access, click Add Features, and then click Next.
-
Click Next five times.
-
On the Confirm installation selections dialog, click Install.
-
On the Installation progress dialog, verify that the installation was successful, and then click Close.
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
