In this multisite test lab guide, the router computer provides an IPv4 and IPv6 bridge between the Corpnet and 2-Corpnet subnets, and acts as a router for IP-HTTPS and Teredo traffic.
-
Install the operating system on ROUTER1
-
Configure TCP/IP properties and rename the computer
-
Turn off the firewall
-
Configure routing and forwarding
Install the operating system on ROUTER1
First, install Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012.
To install the operating system on ROUTER1
-
Start the installation of Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 (full installation).
-
Follow the instructions to complete the installation, specifying a strong password for the local Administrator account. Log on using the local Administrator account.
-
Connect ROUTER1 to a network that has Internet access and run Windows Update to install the latest updates for Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 , and then disconnect from the Internet.
-
Connect ROUTER1 to the Corpnet and 2-Corpnet subnets.
Configure TCP/IP properties and rename the computer
Configure TCP/IP settings on the router and rename the computer to ROUTER1.
To configure TCP/IP properties and rename the computer
-
In the Server Manager console, click Local Server, and then in the Properties area, next to Wired Ethernet Connection, click the link.
-
In the Network Connections window, right-click the network adapter that is connected to Corpnet, click Rename, type Corpnet, and press ENTER.
-
Right-click Corpnet, and then click Properties.
-
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
-
Click Use the following IP address. In IP address, type 10.0.0.254. In Subnet mask, type 255.255.255.0, and then click OK.
-
Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
-
Click Use the following IPv6 address. In IPv6 address, type 2001:db8:1::fe. In Subnet prefix length, type 64, and then click OK.
-
On the Corpnet Properties dialog box click Close.
-
In the Network Connections window, right-click the network adapter that is connected to 2-Corpnet, click Rename, type 2-Corpnet, and press ENTER.
-
Right-click 2-Corpnet, and then click Properties.
-
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
-
Click Use the following IP address. In IP address, type 10.2.0.254. In Subnet mask, type 255.255.255.0, and then click OK.
-
Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
-
Click Use the following IPv6 address. In IPv6 address, type 2001:db8:2::fe. In Subnet prefix length, type 64, and then click OK.
-
On the 2-Corpnet Properties dialog box click Close.
-
Close the Network Connections window.
-
In the Server Manager console, in Local Server, in the Properties area, next to Computer name, click the link.
-
On the System Properties dialog box, on the Computer Name tab, click Change.
-
On the Computer Name/Domain Changes dialog box, in Computer name, type ROUTER1, and then click OK.
-
When you are prompted that you must restart the computer, click OK.
-
On the System Properties dialog box, click Close.
-
When you are prompted to restart the computer, click Restart Now.
-
After the computer has restarted, log on with the local Administrator account.
Turn off the firewall
This computer is configured only to provide routing between the Corpnet and 2-Corpnet subnets; therefore, the firewall must be turned off.
To turn off the firewall
-
On the Start screen, typewf.msc, and then press ENTER.
-
In Windows Firewall with Advanced Security, in the Actions pane, click Properties.
-
On the Windows Firewall with Advanced Security dialog box, on the Domain Profile tab, in Firewall state, click Off.
-
On the Windows Firewall with Advanced Security dialog box, on the Private Profile tab, in Firewall state, click Off.
-
On the Windows Firewall with Advanced Security dialog box, on the Public Profile tab, in Firewall state, click Off, and then click OK.
-
Close Windows Firewall with Advanced Security.
Configure routing and forwarding
To provide routing and forwarding services between the Corpnet and 2-Corpnet subnets, you must enable forwarding on the network interfaces and configure static routes between the subnets.
To configure static routes
-
On the Start screen, typecmd.exe, and then press ENTER.
-
Enable forwarding on both the IPv4 and IPv6 interfaces of both network adapters using the following commands. After entering each command, press ENTER.
netsh interface IPv4 set interface Corpnet forwarding=enabled netsh interface IPv4 set interface 2-Corpnet forwarding=enabled netsh interface IPv6 set interface Corpnet forwarding=enabled netsh interface IPv6 set interface 2-Corpnet forwarding=enabled -
Enable IP-HTTPS routing between the Corpnet and 2-Corpnet subnets.
netsh interface IPv6 add route 2001:db8:1:1000::/59 Corpnet 2001:db8:1::2 netsh interface IPv6 add route 2001:db8:2:2000::/59 2-Corpnet 2001:db8:2::20 -
Enable Teredo routing between the Corpnet and 2-Corpnet subnets.
netsh interface IPv6 add route 2001:0:836b:2::/64 Corpnet 2001:db8:1::2 netsh interface IPv6 add route 2001:0:836b:14::/64 2-Corpnet 2001:db8:2::20 -
Close the Command Prompt window.
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
