2-APP1 provides web and file sharing services. 2-APP1 configuration consists of the following:
-
Install the operating system on 2-APP1
-
Configure TCP/IP properties
-
Join 2-APP1 to the CORP2 domain
-
Install the Web Server (IIS) role on 2-APP1
-
Create a shared folder on 2-APP1
<a name="bkmk_InstallOS"></a>Install the operating system on 2-APP1
First, install Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012.
To install the operating system on 2-APP1
-
Start the installation of Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 (full installation).
-
Follow the instructions to complete the installation, specifying a strong password for the local Administrator account. Log on using the local Administrator account.
-
Connect 2-APP1 to a network that has Internet access and run Windows Update to install the latest updates for Windows Server 2016, Windows Server 2012 R2 or Windows Server 2012 , and then disconnect from the Internet.
-
Connect 2-APP1 to the 2-Corpnet subnet.
<a name="bkmk_TCP"></a>Configure TCP/IP properties
Configure TCP/IP properties on 2-APP1.
To configure TCP/IP properties
-
In the Server Manager console, click Local Server, and then in the Properties area, next to Wired Ethernet Connection, click the link.
-
In the Network Connections window, right-click Wired Ethernet Connection, and then click Properties.
-
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
-
Click Use the following IP address. In IP address, type 10.2.0.3. In Subnet mask, type 255.255.255.0. In Default gateway, type 10.2.0.254.
-
Click Use the following DNS server addresses. In Preferred DNS server, type 10.2.0.1.
-
Click Advanced, and then click the DNS tab. In DNS suffix for this connection, type corp2.corp.contoso.com, and click OK twice.
-
Click Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
-
Click Use the following IPv6 address. In IPv6 address, type 2001:db8:2::3. In Subnet prefix length, type 64. In Default gateway, type 2001:db8:2::fe. Click Use the following DNS server addresses, and in Preferred DNS server, type 2001:db8:2::1.
-
Click Advanced, and then click the DNS tab.
-
In DNS suffix for this connection, type corp2.corp.contoso.com, and then click OK twice.
-
On the Wired Ethernet Connection Properties dialog box click Close.
-
Close the Network Connections window.
<a name="bkmk_JoinDomain"></a>Join 2-APP1 to the CORP2 domain
Join 2-APP1 to the corp2.corp.contoso.com domain.
To join 2-APP1 to the CORP2 domain
-
In the Server Manager console, in Local Server, in the Properties area, next to Computer name, click the link.
-
On the System Properties dialog box, on the Computer Name tab, click Change.
-
In Computer name, type 2-APP1. In Member of, click Domain, type corp2.corp.contoso.com, and then click OK.
-
When you are prompted for a user name and password, type Administrator and its password, and then click OK.
-
When you see a dialog box welcoming you to the corp2.corp.contoso.com domain, click OK.
-
When you are prompted that you must restart the computer, click OK.
-
On the System Properties dialog box, click Close.
-
When you are prompted to restart the computer, click Restart Now.
-
After the computer restarts, click Switch User, and then click Other User and log on to the CORP2 domain with the Administrator account.
<a name="bkmk_IIS"></a>Install the Web Server (IIS) role on 2-APP1
Install the Web Server (IIS) role to make 2-APP1 a web server.
To install the Web Server (IIS) role
-
In the Server Manager console, on the Dashboard, click Add roles and features.
-
Click Next three times to get to the server role selection screen
-
On the Select server roles page, select Web Server (IIS), and then click Next four times.
-
On the Confirm installation selections page, click Install.
-
Verify that the installation was successful, and then click Close.
<a name="bkmk_Share"></a>Create a shared folder on 2-APP1
Create a shared folder and a text file within the folder on 2-APP1.
To create a shared folder
-
On the Start screen, typeexplorer.exe, and then press ENTER.
-
Click Computer, then double-click Local Disk (C:).
-
Click New Folder, type Files, and then press ENTER. Leave the Local Disk window open.
-
On the Start screen, typenotepad.exe, right-click Notepad, click Advanced, and then click Run as administrator.
-
In the Untitled - Notepad window, type This is a shared file on 2-APP1.
-
Click File, click Save, click Computer, double-click Local Disk (C:), and then double-click the Files folder.
-
In File name, type example.txt, and then click Save. Close Notepad.
-
In the Local Disk window, right-click the Files folder, point to Share with, and then click Specific people.
-
On the File Sharing dialog box, in the drop-down list, click Everyone, and then click Add. In Permission Level for Everyone, click Read/Write.
-
Click Share, and then click Done.
-
Close the Local Disk window.
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
