This article shows you how to configure RRAS server to block VPN clients that use a revoked IKEv2 certificate for authentication after installing any Windows update.
Once the RRAS server is configured for certificate revocation, any VPN clients that attempt to use a revoked IKEv2 certificate for authentication, such as device tunnel Always-on VPNs, will be denied connection.
For more information on authentication certificates in Windows, see Certificates and trust in Windows.
Configure VPN authentication
-
Confirm that all VPN client and RRAS server certificates have CDP entries, and that the RRAS server can reach the respective CRLs.
-
On the RRAS server, run the following PowerShell code to set the authentication method to accept root certificates with a Subject that contains the name of your certification authority. Make sure that you replace {Your Root Certification Authority} with the name of your root certification authority.
$cert1 = ( Get-ChildItem -Path cert:LocalMachine\root | Where-Object -FilterScript { $_.Subject -Like "*CN={Your Root Certification Authority}*" } ) Set-VpnAuthProtocol -RootCertificateNameToAccept $cert1 -PassThru
Configure the RRAS server to enforce IKEv2 machine certificate revocation
-
On the RRAS server, open a Command Prompt window.
-
In the Command Prompt window, run the following command:
reg add HKLM\SYSTEM\CurrentControlSet\Services\RemoteAccess\Parameters\Ikev2 /f /v CertAuthFlags /t REG_DWORD /d "4" -
Restart the Routing and Remote Access service.
Note: To disable certificate revocation for these VPN connections, set CertAuthFlags = 2 or remove the CertAuthFlags value, and then restart the Routing and Remote Access service.
Revoke an IKEv2 machine VPN client certificate
-
Revoke the VPN client certificate from the Certification Authority.
-
Publish a new CRL from the Certification Authority.
-
On the RRAS server, open an administrative Command Prompt window, and then run the following commands:
certutil -urlcache * delete certutil -setreg chain\ChainCacheResyncFiletime @now
Verify that certificate revocation is working
Note: Before you use this procedure, make sure that you enable the CAPI2 operational event log.
-
Try to connect to the VPN by using a client that has the revoked certificate. The RRAS server should refuse the connection and display a message such as "IKE authentication credentials are unacceptable."
-
On the RRAS server, open Event Viewer, and navigate to Applications and Services Logs/Microsoft/Windows/CAPI2.
-
Search for an event that has the following information:
- Log Name: Microsoft-Windows-CAPI2/Operational Microsoft-Windows-CAPI2/Operational
- Event ID: 41
- The event contains the following text: subject="Client FQDN" (Client FQDN represents the fully qualified domain name of the client that has the revoked certificate.)
The <Result> field of the event data should include The certificate is revoked. For example, see the following excerpts from an event:
Log Name: Microsoft-Windows-CAPI2/Operational Microsoft-Windows-CAPI2/Operational Source: Microsoft-Windows-CAPI2 Date: 5/20/2019 1:33:24 PM Event ID: 41 ... Event Xml: <Event xmlns="https://schemas.microsoft.com/win/2004/08/events/event"> <UserData> <CertVerifyRevocation> <Certificate fileRef="C97AE73E9823E8179903E81107E089497C77A720.cer" subjectName="client01.corp.contoso.com" /> <IssuerCertificate fileRef="34B1AE2BD868FE4F8BFDCA96E47C87C12BC01E3A.cer" subjectName="Contoso Root Certification Authority" /> ... <Result value="80092010">The certificate is revoked.</Result> </CertVerifyRevocation> </UserData> </Event>
Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
