大网数据广告活动
磁盘与文件系统

Move disks to another computer

· 52CE 我爱测

This article describes how to move disks to another computer

**

This section describes the steps to take, and the considerations associated with, moving disks to another computer. You might want to print this procedure or write down the steps before attempting to move disks from one computer to another.

Note: You must be a member of the Backup Operators or Administrators group, at minimum, to complete these steps.

Verify volume health

Use Disk Management to make sure the status of the volumes on the disks is Healthy. If the status is not Healthy, repair the volumes before you move the disks.

To verify the volume status, from the View menu, check the Status column in the Volume List view, or under the volume size and file system information in the Graphical View.

Uninstall the disks

Uninstall the disks you want to move using Device Manager.

To uninstall disks

  1. Open Device Manager in Computer Management.

  2. In the device list, double-click Disk drives.

  3. Right-click the disks you want to uninstall, and then click Uninstall.

  4. In the Confirm Device Removal dialog box, click OK.

Remove dynamic disks

  1. If the disks you want to move are dynamic disks, in Disk Management, right-click the disks you want to move, and then click Remove Disk.

  2. After having removed dynamic disks, or if you are moving basic disks, you can now physically disconnect them. If the disks are external, you can now unplug them from the computer. If the disks are internal, turn off the computer, and then physically remove them.

Install disks in the new computer

  1. If the disks are external, plug them into the computer. If the disks are internal, make sure the computer is turned off and then physically install the disks in that computer.

  2. Start the computer that contains the disks you moved and follow the instructions in the Found New Hardware dialog box.

Detect new disks

  1. On the new computer, open Disk Management.
  2. Click Action and then click Rescan Disks.
  3. Right-click any disk marked Foreign.
  4. Click Import Foreign Disks and then follow the on-screen instructions.

Additional considerations

  • When moved to another computer, basic volumes receive the next available drive letter on that computer.

  • Dynamic volumes retain the drive letter they had on the previous computer. If a dynamic volume did not have a drive letter on the previous computer, it will not receive a drive letter when moved to another computer. If the drive letter is already used on the computer where a volume is moved, the volume receives the next available drive letter.

  • If an administrator has used either the mountvol /n or the diskpart automount command to prevent new volumes from being added to the system, volumes moved from another computer are prevented from being mounted and from receiving a drive letter. To use the volume, you must manually mount the volume and assign it a drive letter using Disk Management or the DiskPart and mountvol commands.

  • If you are moving spanned, striped, mirrored, or RAID-5 volumes, it is highly recommended that you move all disks containing the volume together. Otherwise, the volumes on the disks cannot be brought online and will not be accessible except to delete them.

  • You can move multiple disks from different computers to a computer by installing the disks, opening Disk Management, right-clicking any of the new disks, and then clicking Import Foreign Disks. When importing multiple disks from different computers, always import all the disks from one computer at a time. For example, if you want to move disks from two computers, import all disks from the first computer and then import all disks from the second computer.

  • Disk Management describes the condition of the volumes on the disks before they are imported. Review this information carefully. If there are any problems, this information will tell you what will happen to each volume on these disks once the disks have been imported.

  • If you move a GUID Partition Table (GPT) disk containing the Windows operating system to an x86-based or x64-based computer, you can access the data, but you cannot boot from that operating system.

Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Server documentation
适用范围
Windows Server · Source date 10/12/2017
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。