大网数据广告活动
磁盘与文件系统

Understand Direct Access (DAX) and create DAX volumes with persistent memory devices

· 52CE 我爱测

This article provides information on DAX and how to configure it with persistent memory modules.

Direct access (DAX) treats persistent memory devices as byte-addressable memory to get the lowest latency, providing direct access to byte-addressable memory rather than following normal file system block I/O conventions. The app directly modifies the persistent memory, bypassing the software overhead of the I/O stack. When used properly by DAX-aware code (that is, by memory mapping data), this can provide significant performance benefits. However, DAX has a number of issues, and it won’t provide significant benefits without DAX-aware code.

In Windows Server 2019 and later, you can only create a DAX volume on a Storage Spaces or Storage Spaces Direct configuration that uses a single persistent memory disk, with no parity and no redundancy. You can't use DAX across more than one persistent memory disk, and you can only use DAX with NTFS.

Note: DAX isn't supported on Azure Local environments.

DAX and block translation table (BTT)

If you don't use DAX correctly, there is potential for data loss. We strongly recommend that you use DAX in conjunction with the block translation table (BTT) to protect against "torn writes" that can occur in the case of a power failure or system outage. BTT mitigates this risk by providing atomic sector update semantics for persistent memory devices, essentially enabling block-like sector writes so that apps can avoid mixing old and new data in a failure scenario.

Although we recommend enabling BTT on most DAX volumes to avoid subjecting the NTFS metadata to torn write issues, the downside of BTT is that it can impact the usage of "large" and "huge" memory pages on a DAX volume because remappings will occur for metadata operations. If you want to use large and huge memory pages for your memory mapped sections, do not turn on BTT.

Create a DAX volume by using Windows PowerShell

Because DAX is a property of the file system, it must be specified when formatting an NTFS volume.

After creating a volume, use the -IsDax switch with the Format-Volume cmdlet to format the volume to be DAX-enabled.

Format-Volume -IsDax:$true

The following code snippet creates a DAX volume on a persistent memory disk.

# Here we use the first pmem disk to create the volume as an example
$disk = (Get-PmemDisk)[0] | Get-PhysicalDisk | Get-Disk
# Initialize the disk to GPT if it is not initialized
If ($disk.partitionstyle -eq "RAW") {$disk | Initialize-Disk -PartitionStyle GPT}
# Create a partition with drive letter 'S' (can use any available drive letter)
$disk | New-Partition -DriveLetter S -UseMaximumSize

   DiskPath: \\?\scmld#ven_8980&dev_097a&subsys_89804151&rev_0018#3&1b1819f6&0&03018089fb63494db728d8418b3cbbf549997891#{53f56307-b6
bf-11d0-94f2-00a0c91efb8b}

PartitionNumber  DriveLetter Offset                                               Size Type
---------------  ----------- ------                                               ---- ----
2                S           16777216                                        251.98 GB Basic

# Format the volume with drive letter 'S' to DAX Volume
Format-Volume -FileSystem NTFS -IsDax:$true -DriveLetter S

DriveLetter FriendlyName FileSystemType DriveType HealthStatus OperationalStatus SizeRemaining      Size
----------- ------------ -------------- --------- ------------ ----------------- -------------      ----
S                        NTFS           Fixed     Healthy      OK                    251.91 GB 251.98 GB

# Verify the volume is DAX enabled
Get-Partition -DriveLetter S | fl

UniqueId             : {00000000-0000-0000-0000-000100000000}SCMLD\VEN_8980&DEV_097A&SUBSYS_89804151&REV_0018\3&1B1819F6&0&03018089F
                       B63494DB728D8418B3CBBF549997891:WIN-8KGI228ULGA
AccessPaths          : {S:\, \\?\Volume{cf468ffa-ae17-4139-a575-717547d4df09}\}
DiskNumber           : 2
DiskPath             : \\?\scmld#ven_8980&dev_097a&subsys_89804151&rev_0018#3&1b1819f6&0&03018089fb63494db728d8418b3cbbf549997891#{5
                       3f56307-b6bf-11d0-94f2-00a0c91efb8b}
DriveLetter          : S
Guid                 : {cf468ffa-ae17-4139-a575-717547d4df09}
IsActive             : False
IsBoot               : False
IsHidden             : False
IsOffline            : False
IsReadOnly           : False
IsShadowCopy         : False
IsDAX                : True                   # <- True: DAX enabled
IsSystem             : False
NoDefaultDriveLetter : False
Offset               : 16777216
OperationalStatus    : Online
PartitionNumber      : 2
Size                 : 251.98 GB
Type                 : Basic

Next steps

For related information, see also:

Source: Microsoft Learn / Windows Server documentation by Microsoft and contributors (upstream author metadata: robinharwood). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Server documentation
适用范围
Windows Server · Source date 05/14/2021
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。