大网数据广告活动
Windows 系统接口

CIM_SerialInterface class

· 52CE 我爱测

The CIM_SerialInterface class represents a CIM_ControlledBy relationship that indicates which devices are accessed through the serial controller and the characteristics of the access.

The CIM_SerialInterface class represents a CIM_ControlledBy relationship that indicates which devices are accessed through the serial controller and the characteristics of the access.

Important: The DMTF (Distributed Management Task Force) CIM (Common Information Model) classes are the parent classes upon which WMI classes are built. WMI currently supports only the CIM 2.x version schemas.

The following syntax is simplified from Managed Object Format (MOF) code and includes all of its inherited properties. Properties are listed in alphabetic order, not MOF order.

Syntax

[Abstract, UUID("{8B309BDA-E3D4-11d2-8601-0000F8102E5F}"), AMENDMENT]
class CIM_SerialInterface : CIM_ControlledBy
{
  uint32                   NegotiatedDataWidth;
  uint64                   NegotiatedSpeed;
  uint16                   AccessState;
  uint32                   NumberOfHardResets;
  uint32                   NumberOfSoftResets;
  CIM_LogicalDevice    REF Dependent;
  CIM_SerialController REF Antecedent;
  uint16                   FlowControlInfo;
  uint16                   NumberOfStopBits;
  uint16                   ParityInfo;
};

Members

The CIM_SerialInterface class has these types of members:

Properties

The CIM_SerialInterface class has these properties.

AccessState

Data type: uint16

Access type: Read-only

Indicates whether the controller is actively commanding or accessing the device. This information is necessary when a logical device can be commanded by, or accessed through, multiple controllers.

This property is inherited from CIM_ControlledBy.

Unknown (0)

Active (1)

Inactive (2)

Antecedent

Data type: CIM_SerialController

Access type: Read-only

Qualifiers: Override ("Antecedent")

A CIM_SerialController that describes the serial controller.

Dependent

Data type: CIM_LogicalDevice

Access type: Read-only

Qualifiers: Override ("Dependent")

A CIM_LogicalDevice that describes the logical device.

FlowControlInfo

Data type: uint16

Access type: Read-only

Indicates the flow control for transmitted data.

Unknown (0)

Not Supported (1)

None (2)

XonXoff (3)

RTS/CTS (4)

Both XonXoff and RTS/CTS (5)

XonXoff and RTS/CTS

NegotiatedDataWidth

Data type: uint32

Access type: Read-only

Qualifiers: Units ("bits")

When several bus or connection-data widths are possible, this property defines the one in use between the devices. Data width is specified in bits. If data width is not negotiated, or if this information is not available or important to device management, the property should be set to 0 (zero).

This property is inherited from CIM_DeviceConnection.

NegotiatedSpeed

Data type: uint64

Access type: Read-only

Qualifiers: Units ("bits per second")

When several bus or connection speeds are possible, this property defines the one being used between the devices. Speed is specified in bits-per-second. If connection or bus speeds are not negotiated, or if this information is not available or important to device management, the property should be set to 0 (zero).

For more information about using uint64 values in scripts, see Scripting in WMI.

This property is inherited from CIM_DeviceConnection.

NumberOfHardResets

Data type: uint32

Access type: Read-only

Number of hard resets issued by the controller. A hard reset returns the device to its initialization or boot-up state. All internal device state information and data are lost.

This property is inherited from CIM_ControlledBy.

NumberOfSoftResets

Data type: uint32

Access type: Read-only

Number of soft resets issued by the controller. A soft reset does not completely clear current device state and data. Exact semantics are dependent on the device and on the protocols and mechanisms used to communicate to it.

This property is inherited from CIM_ControlledBy.

NumberOfStopBits

Data type: uint16

Access type: Read-only

Qualifiers: Units ("bits")

Number of stop bits to transmit.

ParityInfo

Data type: uint16

Access type: Read-only

Information about the parity setting for transmitted data.

Unknown (0)

None (1)

Even (2)

Odd (3)

Remarks

The CIM_SerialInterface class is derived from CIM_ControlledBy.

WMI does not implement this class.

This documentation is derived from the CIM class descriptions published by the DMTF. Microsoft may have made changes to correct minor errors, conform to Microsoft SDK documentation standards, or provide more information.

Requirements

Requirement Value
Minimum supported client Windows Vista
Minimum supported server Windows Server 2008
Namespace Root\CIMV2
MOF CIMWin32.mof
DLL CIMWin32.dll

See also

CIM_ControlledBy

Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Win32 documentation
适用范围
Windows Win32 API · Source date 05/31/2018
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。