The CIM_Slot class represents connectors into which packages are inserted. For example, a physical package that is a disk drive can be inserted into an SCA slot, or a card (a subclass of CIM_PhysicalPackage) can be inserted into a 16-, 32-, or 64-bit expansion slot on a hosting board. PCI or PCMCIA Type III Slots are examples of the latter.
Important: The DMTF (Distributed Management Task Force) CIM (Common Information Model) classes are the parent classes upon which WMI classes are built. WMI currently supports only the CIM 2.x version schemas.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of its inherited properties. Properties are listed in alphabetic order, not MOF order.
Syntax
[abstract, UUID("{FAF76B86-798C-11D2-AAD1-006008C78BC7}"), AMENDMENT]
class CIM_Slot : CIM_PhysicalConnector
{
string Caption;
string ConnectorPinout;
uint16 ConnectorType[];
string CreationClassName;
string Description;
real32 HeightAllowed;
datetime InstallDate;
real32 LengthAllowed;
string Manufacturer;
uint16 MaxDataWidth;
string Model;
string Name;
uint16 Number;
string OtherIdentifyingInfo;
string PartNumber;
boolean PoweredOn;
string PurposeDescription;
string SerialNumber;
string SKU;
boolean SpecialPurpose;
string Status;
boolean SupportsHotPlug;
string Tag;
uint32 ThermalRating;
uint16 VccMixedVoltageSupport[];
string Version;
uint16 VppMixedVoltageSupport[];
};
Members
The CIM_Slot class has these types of members:
Properties
The CIM_Slot class has these properties.
Caption
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64), DisplayName ("Caption")
Short textual description of the object.
This property is inherited from CIM_ManagedSystemElement.
ConnectorPinout
Data type: string
Access type: Read-only
Free-form string that describes the pin configuration and signal use of a physical connector.
This property is inherited from CIM_PhysicalConnector.
ConnectorType
Data type: uint16 array
Access type: Read-only
Qualifiers: Override ("ConnectorType"), MappingStrings ("MIF.DMTF|System Slot|004.2")
Type of physical connector. An array is specified to allow the description of combinations of connector information. For example, one array entry could specify RS-232, another DB-25, and a third could define the connector as "Male".
This property is inherited from CIM_PhysicalConnector.
0
Unknown
1
Other
2
Male
3
Female
4
Shielded
5
Unshielded
6
SCSI (A) High-density (50 pins)
7
SCSI (A) Low-density (50 pins)
8
SCSI (P) High-density (68 pins)
9
SCSI SCA-I (80 pins)
10
SCSI SCA-II (80 pins)
11
SCSI Fibre Channel (DB-9, Copper)
12
SCSI Fibre Channel (Fibre)
13
SCSI Fibre Channel SCA-II (40 pins)
14
SCSI Fibre Channel SCA-II (20 pins)
15
SCSI Fibre Channel BNC
16
ATA 3-1/2 Inch (40 pins)
17
ATA 2-1/2 Inch (44 pins)
18
ATA-2
19
ATA-3
20
ATA/66
21
DB-9
22
DB-15
23
DB-25
24
DB-36
25
RS-232C
26
RS-422
27
RS-423
28
RS-485
29
RS-449
30
V.35
31
X.21
32
IEEE-488
33
AUI
34
UTP Category 3
35
UTP Category 4
36
UTP Category 5
37
BNC
38
RJ11
39
RJ45
40
Fiber MIC
41
Apple AUI
42
Apple GeoPort
43
PCI
44
ISA
45
EISA
46
VESA
47
PCMCIA
48
PCMCIA Type I
49
PCMCIA Type II
50
PCMCIA Type III
51
ZV Port
52
CardBus
53
USB
54
IEEE 1394
55
HIPPI
56
HSSDC (6 pins)
57
GBIC
58
DIN
59
Mini-DIN
60
Micro-DIN
61
PS/2
62
Infrared
63
HP-HIL
64
Access.bus
65
NuBus
66
Centronics
67
Mini-Centronics
68
Mini-Centronics Type-14
69
Mini-Centronics Type-20
70
Mini-Centronics Type-26
71
Bus Mouse
72
ADB
73
AGP
74
VME Bus
75
VME64
76
Proprietary
77
Proprietary Processor Card Slot
78
Proprietary Memory Card Slot
79
Proprietary I/O Riser Slot
80
PCI-66MHZ
81
AGP2X
82
AGP4X
83
PC-98
84
PC-98-Hireso
85
PC-H98
86
PC-98Note
87
PC-98Full
88
SSA SCSI
89
Circular
90
On Board IDE Connector
91
On Board Floppy Connector
92
9 Pin Dual Inline
93
25 Pin Dual Inline
94
50 Pin Dual Inline
95
68 Pin Dual Inline
96
On Board Sound Connector
97
Mini-jack
98
PCI-X
99
Sbus IEEE 1396-1993 32 bit
100
Sbus IEEE 1396-1993 64 bit
101
MCA
102
GIO
103
XIO
104
HIO
105
NGIO
106
PMC
107
MTRJ
108
VF-45
109
Future I/O
110
SC
111
SG
112
Electrical
113
Optical
114
Ribbon
115
GLM
116
1x9
117
Mini SG
118
LC
119
HSSC
120
VHDCI Shielded (68 pins)
121
InfiniBand
CreationClassName
Data type: string
Access type: Read-only
Qualifiers: CIM_Key, MaxLen (256)
Name of the class or subclass used in the creation of an instance. When used with other key properties of the class, this property allows all instances of the class and its subclasses to be uniquely identified.
This property is inherited from CIM_PhysicalElement.
Description
Data type: string
Access type: Read-only
Qualifiers: DisplayName ("Description")
Textual description of the object.
This property is inherited from CIM_ManagedSystemElement.
HeightAllowed
Data type: real32
Access type: Read-only
Qualifiers: Units ("inches")
Maximum height, in inches, of an adapter card that can be inserted into the slot.
InstallDate
Data type: datetime
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|ComponentID|001.5"), DisplayName ("Install Date")
Date and time the object was installed. This property does not need a value to indicate that the object is installed.
This property is inherited from CIM_ManagedSystemElement.
LengthAllowed
Data type: real32
Access type: Read-only
Qualifiers: Units ("inches")
Maximum length, in inches, of an adapter card that can be inserted into the slot.
Manufacturer
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256)
Organization that produced the physical element. For more information, see the Vendor property of CIM_Product.
This property is inherited from CIM_PhysicalElement.
MaxDataWidth
Data type: uint16
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|System Slot|004.3"), Units ("bits")
Maximum bus width, in bits, of adapter cards that can be inserted into the slot.
8 (0)
16 (1)
32 (2)
64 (3)
128 (4)
Model
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)
Name by which the physical element is generally known.
This property is inherited from CIM_PhysicalElement.
Name
Data type: string
Access type: Read-only
Qualifiers: DisplayName ("Name")
Label by which the object is known. When subclassed, this property can be overridden to be a key property.
This property is inherited from CIM_ManagedSystemElement.
Number
Data type: uint16
Access type: Read-only
Physical slot number, which can be used as an index into a system slot table, to determine whether the slot is physically occupied.
OtherIdentifyingInfo
Data type: string
Access type: Read-only
Additional data, beyond asset tag information, that can be used to identify a physical element. One example is bar-code data that is associated with an element, which also has an asset tag. Note that if only bar-code data is available, and is unique and able to be used as an element key, this property would be null and the bar-code data would be used as the class key in the Tag property.
This property is inherited from CIM_PhysicalElement.
PartNumber
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256)
Part number assigned by the organization that produced or manufactured the physical element.
This property is inherited from CIM_PhysicalElement.
PoweredOn
Data type: boolean
Access type: Read-only
If TRUE, the physical element is powered on.
This property is inherited from CIM_PhysicalElement.
PurposeDescription
Data type: string
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_Slot.SpecialPurpose")
Free-form string that describes how this slot is physically unique and that it may hold special types of hardware. This property only has meaning when the corresponding Boolean SpecialPurpose property is set to TRUE.
SerialNumber
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)
Manufacturer-allocated number used to identify the physical element.
This property is inherited from CIM_PhysicalElement.
SKU
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)
Stock-keeping unit number for the physical element.
This property is inherited from CIM_PhysicalElement.
SpecialPurpose
Data type: boolean
Access type: Read-only
Qualifiers: ModelCorrespondence ("CIM_Slot.PurposeDescription")
If TRUE, the slot is physically unique and may hold special types of hardware, (for example, a graphics processor slot). If TRUE, the PurposeDescription property should specify how the slot is unique or the slot's purpose.
Status
Data type: string
Access type: Read-only
Qualifiers: MaxLen (10), DisplayName ("Status")
Current status of the object. This property is inherited from CIM_ManagedSystemElement.
Values include the following:
OK ("OK")
Error ("Error")
Degraded ("Degraded")
Unknown ("Unknown")
Pred Fail ("Pred Fail")
Starting ("Starting")
Stopping ("Stopping")
Service ("Service")
Stressed ("Stressed")
NonRecover ("NonRecover")
No Contact ("No Contact")
Lost Comm ("Lost Comm")
SupportsHotPlug
Data type: boolean
Access type: Read-only
If TRUE, the slot supports hot-plugging of adapter cards.
Tag
Data type: string
Access type: Read-only
Qualifiers: CIM_Key, MaxLen (256)
Arbitrary string that uniquely identifies the physical element and serves as the element's key. This property can contain information, such as asset tag or serial number data. The key for CIM_PhysicalElement is placed very high in the object hierarchy to independently identify the hardware/entity, regardless of physical placement in (or on) cabinets, adapters, and so on. For example, a removable component that can be hot-swapped can be taken from its containing (scoping) package and be temporarily unused. The object still continues to exist and can even be inserted into a different scoping container. The key for a physical element is an arbitrary string that is defined independently of placement or location-oriented hierarchy.
This property is inherited from CIM_PhysicalElement.
ThermalRating
Data type: uint32
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|System Slot|004.11"), Units ("milliwatts")
Maximum thermal dissipation of the slot, in milliwatts.
VccMixedVoltageSupport
Data type: uint16 array
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|System Slot|004.9")
Vcc voltage supported by the slot.
Unknown (0)
Other (1)
3.3V (2)
5V (3)
Version
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64)
Version of the physical element.
This property is inherited from CIM_PhysicalElement.
VppMixedVoltageSupport
Data type: uint16 array
Access type: Read-only
Qualifiers: MappingStrings ("MIF.DMTF|System Slot|004.10")
Vpp voltage supported by the slot.
Unknown (0)
Other (1)
3.3V (2)
5V (3)
12V (4)
Remarks
The CIM_Slot class is derived from CIM_PhysicalConnector.
WMI does not implement this class. For WMI classes derived from CIM_Slot, see Win32 Classes.
This documentation is derived from the CIM class descriptions published by the DMTF. Microsoft may have made changes to correct minor errors, conform to Microsoft SDK documentation standards, or provide more information.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows Vista |
| Minimum supported server | Windows Server 2008 |
| Namespace | Root\CIMV2 |
| MOF | CIMWin32.mof |
| DLL | CIMWin32.dll |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
