The following table provides a list of error codes used by COM-based APIs.
If you are experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. To obtain support for a Microsoft product, go to https://support.microsoft.com.
| Constant/value | Description |
|---|---|
| XACT_E_ALREADYOTHERSINGLEPHASE 0x8004D000 | Another single phase resource manager has already been enlisted in this transaction. |
| XACT_E_CANTRETAIN 0x8004D001 | A retaining commit or abort is not supported |
| XACT_E_COMMITFAILED 0x8004D002 | The transaction failed to commit for an unknown reason. The transaction was aborted. |
| XACT_E_COMMITPREVENTED 0x8004D003 | Cannot call commit on this transaction object because the calling application did not initiate the transaction. |
| XACT_E_HEURISTICABORT 0x8004D004 | Instead of committing, the resource heuristically aborted. |
| XACT_E_HEURISTICCOMMIT 0x8004D005 | Instead of aborting, the resource heuristically committed. |
| XACT_E_HEURISTICDAMAGE 0x8004D006 | Some of the states of the resource were committed while others were aborted, likely because of heuristic decisions. |
| XACT_E_HEURISTICDANGER 0x8004D007 | Some of the states of the resource may have been committed while others may have been aborted, likely because of heuristic decisions. |
| XACT_E_ISOLATIONLEVEL 0x8004D008 | The requested isolation level is not valid or supported. |
| XACT_E_NOASYNC 0x8004D009 | The transaction manager doesn't support an asynchronous operation for this method. |
| XACT_E_NOENLIST 0x8004D00A | Unable to enlist in the transaction. |
| XACT_E_NOISORETAIN 0x8004D00B | The requested semantics of retention of isolation across retaining commit and abort boundaries cannot be supported by this transaction implementation, or isoFlags was not equal to zero. |
| XACT_E_NORESOURCE 0x8004D00C | There is no resource presently associated with this enlistment |
| XACT_E_NOTCURRENT 0x8004D00D | The transaction failed to commit due to the failure of optimistic concurrency control in at least one of the resource managers. |
| XACT_E_NOTRANSACTION 0x8004D00E | The transaction has already been implicitly or explicitly committed or aborted |
| XACT_E_NOTSUPPORTED 0x8004D00F | An invalid combination of flags was specified |
| XACT_E_UNKNOWNRMGRID 0x8004D010 | The resource manager id is not associated with this transaction or the transaction manager. |
| XACT_E_WRONGSTATE 0x8004D011 | This method was called in the wrong state |
| XACT_E_WRONGUOW 0x8004D012 | The indicated unit of work does not match the unit of work expected by the resource manager. |
| XACT_E_XTIONEXISTS 0x8004D013 | An enlistment in a transaction already exists. |
| XACT_E_NOIMPORTOBJECT 0x8004D014 | An import object for the transaction could not be found. |
| XACT_E_INVALIDCOOKIE 0x8004D015 | The transaction cookie is invalid. |
| XACT_E_INDOUBT 0x8004D016 | The transaction status is in doubt. A communication failure occurred, or a transaction manager or resource manager has failed |
| XACT_E_NOTIMEOUT 0x8004D017 | A time-out was specified, but time-outs are not supported. |
| XACT_E_ALREADYINPROGRESS 0x8004D018 | The requested operation is already in progress for the transaction. |
| XACT_E_ABORTED 0x8004D019 | The transaction has already been aborted. |
| XACT_E_LOGFULL 0x8004D01A | The Transaction Manager returned a log full error. |
| XACT_E_TMNOTAVAILABLE 0x8004D01B | The Transaction Manager is not available. |
| XACT_E_CONNECTION_DOWN 0x8004D01C | A connection with the transaction manager was lost. |
| XACT_E_CONNECTION_DENIED 0x8004D01D | A request to establish a connection with the transaction manager was denied. |
| XACT_E_REENLISTTIMEOUT 0x8004D01E | Resource manager reenlistment to determine transaction status timed out. |
| XACT_E_TIP_CONNECT_FAILED 0x8004D01F | This transaction manager failed to establish a connection with another TIP transaction manager. |
| XACT_E_TIP_PROTOCOL_ERROR 0x8004D020 | This transaction manager encountered a protocol error with another TIP transaction manager. |
| XACT_E_TIP_PULL_FAILED 0x8004D021 | This transaction manager could not propagate a transaction from another TIP transaction manager. |
| XACT_E_DEST_TMNOTAVAILABLE 0x8004D022 | The Transaction Manager on the destination machine is not available. |
| XACT_E_TIP_DISABLED 0x8004D023 | The Transaction Manager has disabled its support for TIP. |
| XACT_E_NETWORK_TX_DISABLED 0x8004D024 | The transaction manager has disabled its support for remote/network transactions. |
| XACT_E_PARTNER_NETWORK_TX_DISABLED 0x8004D025 | The partner transaction manager has disabled its support for remote/network transactions. |
| XACT_E_XA_TX_DISABLED 0x8004D026 | The transaction manager has disabled its support for XA transactions. |
| XACT_E_UNABLE_TO_READ_DTC_CONFIG 0x8004D027 | MSDTC was unable to read its configuration information. |
| XACT_E_UNABLE_TO_LOAD_DTC_PROXY 0x8004D028 | MSDTC was unable to load the dtc proxy dll. |
| XACT_E_ABORTING 0x8004D029 | The local transaction has aborted. |
| XACT_E_PUSH_COMM_FAILURE 0x8004D02A | The MSDTC transaction manager was unable to push the transaction to the destination transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers. |
| XACT_E_PULL_COMM_FAILURE 0x8004D02B | The MSDTC transaction manager was unable to pull the transaction from the source transaction manager due to communication problems. Possible causes are: a firewall is present and it doesn't have an exception for the MSDTC process, the two machines cannot find each other by their NetBIOS names, or the support for network transactions is not enabled for one of the two transaction managers. |
| XACT_E_LU_TX_DISABLED 0x8004D02C | The MSDTC transaction manager has disabled its support for SNA LU 6.2 transactions. |
| XACT_E_CLERKNOTFOUND 0x8004D080 | XACT_E_CLERKNOTFOUND |
| XACT_E_CLERKEXISTS 0x8004D081 | XACT_E_CLERKEXISTS |
| XACT_E_RECOVERYINPROGRESS 0x8004D082 | XACT_E_RECOVERYINPROGRESS |
| XACT_E_TRANSACTIONCLOSED 0x8004D083 | XACT_E_TRANSACTIONCLOSED |
| XACT_E_INVALIDLSN 0x8004D084 | XACT_E_INVALIDLSN |
| XACT_E_REPLAYREQUEST 0x8004D085 | XACT_E_REPLAYREQUEST |
| XACT_S_ASYNC 0x0004D000 | An asynchronous operation was specified. The operation has begun, but its outcome is not known yet. |
| XACT_S_DEFECT 0x0004D001 | XACT_S_DEFECT |
| XACT_S_READONLY 0x0004D002 | The method call succeeded because the transaction was read-only. |
| XACT_S_SOMENORETAIN 0x0004D003 | The transaction was successfully aborted. However, this is a coordinated transaction, and some number of enlisted resources were aborted outright because they could not support abort-retaining semantics |
| XACT_S_OKINFORM 0x0004D004 | No changes were made during this call, but the sink wants another chance to look if any other sinks make further changes. |
| XACT_S_MADECHANGESCONTENT 0x0004D005 | The sink is content and wishes the transaction to proceed. Changes were made to one or more resources during this call. |
| XACT_S_MADECHANGESINFORM 0x0004D006 | The sink is for the moment and wishes the transaction to proceed, but if other changes are made following this return by other event sinks then this sink wants another chance to look |
| XACT_S_ALLNORETAIN 0x0004D007 | The transaction was successfully aborted. However, the abort was non-retaining. |
| XACT_S_ABORTING 0x0004D008 | An abort operation was already in progress. |
| XACT_S_SINGLEPHASE 0x0004D009 | The resource manager has performed a single-phase commit of the transaction. |
| XACT_S_LOCALLY_OK 0x0004D00A | The local transaction has not aborted. |
| XACT_S_LASTRESOURCEMANAGER 0x0004D010 | The resource manager has requested to be the coordinator (last resource manager) for the transaction. |
| CONTEXT_E_ABORTED 0x8004E002 | The root transaction wanted to commit, but transaction aborted |
| CONTEXT_E_ABORTING 0x8004E003 | You made a method call on a COM+ component that has a transaction that has already aborted or in the process of aborting. |
| CONTEXT_E_NOCONTEXT 0x8004E004 | There is no MTS object context |
| CONTEXT_E_WOULD_DEADLOCK 0x8004E005 | The component is configured to use synchronization and this method call would cause a deadlock to occur. |
| CONTEXT_E_SYNCH_TIMEOUT 0x8004E006 | The component is configured to use synchronization and a thread has timed out waiting to enter the context. |
| CONTEXT_E_OLDREF 0x8004E007 | You made a method call on a COM+ component that has a transaction that has already committed or aborted. |
| CONTEXT_E_ROLENOTFOUND 0x8004E00C | The specified role was not configured for the application |
| CONTEXT_E_TMNOTAVAILABLE 0x8004E00F | COM+ was unable to talk to the Microsoft Distributed Transaction Coordinator |
| CO_E_ACTIVATIONFAILED 0x8004E021 | An unexpected error occurred during COM+ Activation. |
| CO_E_ACTIVATIONFAILED_EVENTLOGGED 0x8004E022 | COM+ Activation failed. Check the event log for more information |
| CO_E_ACTIVATIONFAILED_CATALOGERROR 0x8004E023 | COM+ Activation failed due to a catalog or configuration error. |
| CO_E_ACTIVATIONFAILED_TIMEOUT 0x8004E024 | COM+ activation failed because the activation could not be completed in the specified amount of time. |
| CO_E_INITIALIZATIONFAILED 0x8004E025 | COM+ Activation failed because an initialization function failed. Check the event log for more information. |
| CONTEXT_E_NOJIT 0x8004E026 | The requested operation requires that JIT be in the current context and it is not |
| CONTEXT_E_NOTRANSACTION 0x8004E027 | The requested operation requires that the current context have a Transaction, and it does not |
| CO_E_THREADINGMODEL_CHANGED 0x8004E028 | The components threading model has changed after install into a COM+ Application. Please re-install component. |
| CO_E_NOIISINTRINSICS 0x8004E029 | IIS intrinsics not available. Start your work with IIS. |
| CO_E_NOCOOKIES 0x8004E02A | An attempt to write a cookie failed. |
| CO_E_DBERROR 0x8004E02B | An attempt to use a database generated a database specific error. |
| CO_E_NOTPOOLED 0x8004E02C | The COM+ component you created must use object pooling to work. |
| CO_E_NOTCONSTRUCTED 0x8004E02D | The COM+ component you created must use object construction to work correctly. |
| CO_E_NOSYNCHRONIZATION 0x8004E02E | The COM+ component requires synchronization, and it is not configured for it. |
| CO_E_ISOLEVELMISMATCH 0x8004E02F | The TxIsolation Level property for the COM+ component being created is stronger than the TxIsolationLevel for the "root" component for the transaction. The creation failed. |
| CO_E_CALL_OUT_OF_TX_SCOPE_NOT_ALLOWED 0x8004E030 | The component attempted to make a cross-context call between invocations of EnterTransactionScopeand ExitTransactionScope. This is not allowed. Cross-context calls cannot be made while inside of a transaction scope. |
| CO_E_EXIT_TRANSACTION_SCOPE_NOT_CALLED 0x8004E031 | The component made a call to EnterTransactionScope, but did not make a corresponding call to ExitTransactionScope before returning. |
| OLE_S_USEREG 0x00040000 | Use the registry database to provide the requested information |
| OLE_S_STATIC 0x00040001 | Success, but static |
| OLE_S_MAC_CLIPFORMAT 0x00040002 | Macintosh clipboard format |
| DRAGDROP_S_DROP 0x00040100 | Successful drop took place |
| DRAGDROP_S_CANCEL 0x00040101 | Drag-drop operation canceled |
| DRAGDROP_S_USEDEFAULTCURSORS 0x00040102 | Use the default cursor |
| DATA_S_SAMEFORMATETC 0x00040130 | Data has same FORMATETC |
| VIEW_S_ALREADY_FROZEN 0x00040140 | View is already frozen |
| CACHE_S_FORMATETC_NOTSUPPORTED 0x00040170 | FORMATETC not supported |
| CACHE_S_SAMECACHE 0x00040171 | Same cache |
| CACHE_S_SOMECACHES_NOTUPDATED 0x00040172 | Some cache(s) not updated |
| OLEOBJ_S_INVALIDVERB 0x00040180 | Invalid verb for OLE object |
| OLEOBJ_S_CANNOT_DOVERB_NOW 0x00040181 | Verb number is valid but verb cannot be done now |
| OLEOBJ_S_INVALIDHWND 0x00040182 | Invalid window handle passed |
| INPLACE_S_TRUNCATED 0x000401A0 | Message is too long; some of it had to be truncated before displaying |
| CONVERT10_S_NO_PRESENTATION 0x000401C0 | Unable to convert OLESTREAM to IStorage |
| MK_S_REDUCED_TO_SELF 0x000401E2 | Moniker reduced to itself |
| MK_S_ME 0x000401E4 | Common prefix is this moniker |
| MK_S_HIM 0x000401E5 | Common prefix is input moniker |
| MK_S_US 0x000401E6 | Common prefix is both monikers |
| MK_S_MONIKERALREADYREGISTERED 0x000401E7 | Moniker is already registered in running object table |
| SCHED_S_TASK_READY 0x00041300 | The task is ready to run at its next scheduled time. |
| SCHED_S_TASK_RUNNING 0x00041301 | The task is currently running. |
| SCHED_S_TASK_DISABLED 0x00041302 | The task will not run at the scheduled times because it has been disabled. |
| SCHED_S_TASK_HAS_NOT_RUN 0x00041303 | The task has not yet run. |
| SCHED_S_TASK_NO_MORE_RUNS 0x00041304 | There are no more runs scheduled for this task. |
| SCHED_S_TASK_NOT_SCHEDULED 0x00041305 | One or more of the properties that are needed to run this task on a schedule have not been set. |
| SCHED_S_TASK_TERMINATED 0x00041306 | The last run of the task was terminated by the user. |
| SCHED_S_TASK_NO_VALID_TRIGGERS 0x00041307 | Either the task has no triggers or the existing triggers are disabled or not set. |
| SCHED_S_EVENT_TRIGGER 0x00041308 | Event triggers don't have set run times. |
| SCHED_E_TRIGGER_NOT_FOUND 0x80041309 | Trigger not found. |
| SCHED_E_TASK_NOT_READY 0x8004130A | One or more of the properties that are needed to run this task have not been set. |
| SCHED_E_TASK_NOT_RUNNING 0x8004130B | There is no running instance of the task. |
| SCHED_E_SERVICE_NOT_INSTALLED 0x8004130C | The Task Scheduler Service is not installed on this computer. |
| SCHED_E_CANNOT_OPEN_TASK 0x8004130D | The task object could not be opened. |
| SCHED_E_INVALID_TASK 0x8004130E | The object is either an invalid task object or is not a task object. |
| SCHED_E_ACCOUNT_INFORMATION_NOT_SET 0x8004130F | No account information could be found in the Task Scheduler security database for the task indicated. |
| SCHED_E_ACCOUNT_NAME_NOT_FOUND 0x80041310 | Unable to establish existence of the account specified. |
| SCHED_E_ACCOUNT_DBASE_CORRUPT 0x80041311 | Corruption was detected in the Task Scheduler security database; the database has been reset. |
| SCHED_E_NO_SECURITY_SERVICES 0x80041312 | Task Scheduler security services are not available. |
| SCHED_E_UNKNOWN_OBJECT_VERSION 0x80041313 | The task object version is either unsupported or invalid. |
| SCHED_E_UNSUPPORTED_ACCOUNT_OPTION 0x80041314 | The task has been configured with an unsupported combination of account settings and run time options. |
| SCHED_E_SERVICE_NOT_RUNNING 0x80041315 | The Task Scheduler Service is not running. |
| SCHED_E_UNEXPECTEDNODE 0x80041316 | The task XML contains an unexpected node. |
| SCHED_E_NAMESPACE 0x80041317 | The task XML contains an element or attribute from an unexpected namespace. |
| SCHED_E_INVALIDVALUE 0x80041318 | The task XML contains a value which is incorrectly formatted or out of range. |
| SCHED_E_MISSINGNODE 0x80041319 | The task XML is missing a required element or attribute. |
| SCHED_E_MALFORMEDXML 0x8004131A | The task XML is malformed. |
| SCHED_S_SOME_TRIGGERS_FAILED 0x0004131B | The task is registered, but not all specified triggers will start the task. |
| SCHED_S_BATCH_LOGON_PROBLEM 0x0004131C | The task is registered, but may fail to start. Batch logon privilege needs to be enabled for the task principal. |
| SCHED_E_TOO_MANY_NODES 0x8004131D | The task XML contains too many nodes of the same type. |
| SCHED_E_PAST_END_BOUNDARY 0x8004131E | The task cannot be started after the trigger's end boundary. |
| SCHED_E_ALREADY_RUNNING 0x8004131F | An instance of this task is already running. |
| SCHED_E_USER_NOT_LOGGED_ON 0x80041320 | The task will not run because the user is not logged on. |
| SCHED_E_INVALID_TASK_HASH 0x80041321 | The task image is corrupt or has been tampered with. |
| SCHED_E_SERVICE_NOT_AVAILABLE 0x80041322 | The Task Scheduler service is not available. |
| SCHED_E_SERVICE_TOO_BUSY 0x80041323 | The Task Scheduler service is too busy to handle your request. Please try again later. |
| SCHED_E_TASK_ATTEMPTED 0x80041324 | The Task Scheduler service attempted to run the task, but the task did not run due to one of the constraints in the task definition. |
| SCHED_S_TASK_QUEUED 0x00041325 | The Task Scheduler service has asked the task to run. |
| SCHED_E_TASK_DISABLED 0x80041326 | The task is disabled. |
| SCHED_E_TASK_NOT_V1_COMPAT 0x80041327 | The task has properties that are not compatible with previous versions of Windows. |
| SCHED_E_START_ON_DEMAND 0x80041328 | The task settings do not allow the task to start on demand. |
| SCHED_E_TASK_NOT_UBPM_COMPAT 0x80041329 | The combination of properties that task is using is not compatible with the scheduling engine. |
| CO_E_CLASS_CREATE_FAILED 0x80080001 | Attempt to create a class object failed |
| CO_E_SCM_ERROR 0x80080002 | OLE service could not bind object |
| CO_E_SCM_RPC_FAILURE 0x80080003 | RPC communication failed with OLE service |
| CO_E_BAD_PATH 0x80080004 | Bad path to object |
| CO_E_SERVER_EXEC_FAILURE 0x80080005 | Server execution failed |
| CO_E_OBJSRV_RPC_FAILURE 0x80080006 | OLE service could not communicate with the object server |
| MK_E_NO_NORMALIZED 0x80080007 | Moniker path could not be normalized |
| CO_E_SERVER_STOPPING 0x80080008 | Object server is stopping when OLE service contacts it |
| MEM_E_INVALID_ROOT 0x80080009 | An invalid root block pointer was specified |
| MEM_E_INVALID_LINK 0x80080010 | An allocation chain contained an invalid link pointer |
| MEM_E_INVALID_SIZE 0x80080011 | The requested allocation size was too large |
| CO_S_NOTALLINTERFACES 0x00080012 | Not all the requested interfaces were available |
| CO_S_MACHINENAMENOTFOUND 0x00080013 | The specified machine name was not found in the cache. |
| CO_E_MISSING_DISPLAYNAME 0x80080015 | The activation requires a display name to be present under the CLSID key. |
| CO_E_RUNAS_VALUE_MUST_BE_AAA 0x80080016 | The activation requires that the RunAs value for the application is Activate As Activator. |
| CO_E_ELEVATION_DISABLED 0x80080017 | The class is not configured to support Elevated activation. |
| DISP_E_UNKNOWNINTERFACE 0x80020001 | Unknown interface. |
| DISP_E_MEMBERNOTFOUND 0x80020003 | Member not found. |
| DISP_E_PARAMNOTFOUND 0x80020004 | Parameter not found. |
| DISP_E_TYPEMISMATCH 0x80020005 | Type mismatch. |
| DISP_E_UNKNOWNNAME 0x80020006 | Unknown name. |
| DISP_E_NONAMEDARGS 0x80020007 | No named arguments. |
| DISP_E_BADVARTYPE 0x80020008 | Bad variable type. |
| DISP_E_EXCEPTION 0x80020009 | Exception occurred. |
| DISP_E_OVERFLOW 0x8002000A | Out of present range. |
| DISP_E_BADINDEX 0x8002000B | Invalid index. |
| DISP_E_UNKNOWNLCID 0x8002000C | Unknown language. |
| DISP_E_ARRAYISLOCKED 0x8002000D | Memory is locked. |
| DISP_E_BADPARAMCOUNT 0x8002000E | Invalid number of parameters. |
| DISP_E_PARAMNOTOPTIONAL 0x8002000F | Parameter not optional. |
| DISP_E_BADCALLEE 0x80020010 | Invalid callee. |
| DISP_E_NOTACOLLECTION 0x80020011 | Does not support a collection. |
| DISP_E_DIVBYZERO 0x80020012 | Division by zero. |
| DISP_E_BUFFERTOOSMALL 0x80020013 | Buffer too small |
| TYPE_E_BUFFERTOOSMALL 0x80028016 | Buffer too small. |
| TYPE_E_FIELDNOTFOUND 0x80028017 | Field name not defined in the record. |
| TYPE_E_INVDATAREAD 0x80028018 | Old format or invalid type library. |
| TYPE_E_UNSUPFORMAT 0x80028019 | Old format or invalid type library. |
| TYPE_E_REGISTRYACCESS 0x8002801C | Error accessing the OLE registry. |
| TYPE_E_LIBNOTREGISTERED 0x8002801D | Library not registered. |
| TYPE_E_UNDEFINEDTYPE 0x80028027 | Bound to unknown type. |
| TYPE_E_QUALIFIEDNAMEDISALLOWED 0x80028028 | Qualified name disallowed. |
| TYPE_E_INVALIDSTATE 0x80028029 | Invalid forward reference, or reference to uncompiled type. |
| TYPE_E_WRONGTYPEKIND 0x8002802A | Type mismatch. |
| TYPE_E_ELEMENTNOTFOUND 0x8002802B | Element not found. |
| TYPE_E_AMBIGUOUSNAME 0x8002802C | Ambiguous name. |
| TYPE_E_NAMECONFLICT 0x8002802D | Name already exists in the library. |
| TYPE_E_UNKNOWNLCID 0x8002802E | Unknown LCID. |
| TYPE_E_DLLFUNCTIONNOTFOUND 0x8002802F | Function not defined in specified DLL. |
| TYPE_E_BADMODULEKIND 0x800288BD | Wrong module kind for the operation. |
| TYPE_E_SIZETOOBIG 0x800288C5 | Size may not exceed 64K. |
| TYPE_E_DUPLICATEID 0x800288C6 | Duplicate ID in inheritance hierarchy. |
| TYPE_E_INVALIDID 0x800288CF | Incorrect inheritance depth in standard OLE hmember. |
| TYPE_E_TYPEMISMATCH 0x80028CA0 | Type mismatch. |
| TYPE_E_OUTOFBOUNDS 0x80028CA1 | Invalid number of arguments. |
| TYPE_E_IOERROR 0x80028CA2 | I/O Error. |
| TYPE_E_CANTCREATETMPFILE 0x80028CA3 | Error creating unique tmp file. |
| TYPE_E_CANTLOADLIBRARY 0x80029C4A | Error loading type library/DLL. |
| TYPE_E_INCONSISTENTPROPFUNCS 0x80029C83 | Inconsistent property functions. |
| TYPE_E_CIRCULARTYPE 0x80029C84 | Circular dependency between types/modules. |
Requirements
| Requirement | Value |
|---|---|
| Header | Winerror.h |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
