The following table provides a list of error codes used by COM-based APIs.
If you are experiencing difficulty with an application you are installing or running, contact customer support for the software that is displaying the error message. To obtain support for a Microsoft product, go to https://support.microsoft.com.
| Constant/value | Description |
|---|---|
| STG_E_INVALIDFUNCTION 0x80030001 | Unable to perform requested operation. |
| STG_E_FILENOTFOUND 0x80030002 | could not be found. |
| STG_E_PATHNOTFOUND 0x80030003 | The path %1 could not be found. |
| STG_E_TOOMANYOPENFILES 0x80030004 | There are insufficient resources to open another file. |
| STG_E_ACCESSDENIED 0x80030005 | Access Denied. |
| STG_E_INVALIDHANDLE 0x80030006 | Attempted an operation on an invalid object. |
| STG_E_INSUFFICIENTMEMORY 0x80030008 | There is insufficient memory available to complete operation. |
| STG_E_INVALIDPOINTER 0x80030009 | Invalid pointer error. |
| STG_E_NOMOREFILES 0x80030012 | There are no more entries to return. |
| STG_E_DISKISWRITEPROTECTED 0x80030013 | Disk is write-protected. |
| STG_E_SEEKERROR 0x80030019 | An error occurred during a seek operation. |
| STG_E_WRITEFAULT 0x8003001D | A disk error occurred during a write operation. |
| STG_E_READFAULT 0x8003001E | A disk error occurred during a read operation. |
| STG_E_SHAREVIOLATION 0x80030020 | A share violation has occurred. |
| STG_E_LOCKVIOLATION 0x80030021 | A lock violation has occurred. |
| STG_E_FILEALREADYEXISTS 0x80030050 | already exists. |
| STG_E_INVALIDPARAMETER 0x80030057 | Invalid parameter error. |
| STG_E_MEDIUMFULL 0x80030070 | There is insufficient disk space to complete operation. |
| STG_E_PROPSETMISMATCHED 0x800300F0 | Illegal write of non-simple property to simple property set. |
| STG_E_ABNORMALAPIEXIT 0x800300FA | An API call exited abnormally. |
| STG_E_INVALIDHEADER 0x800300FB | The file %1 is not a valid compound file. |
| STG_E_INVALIDNAME 0x800300FC | The name %1 is not valid. |
| STG_E_UNKNOWN 0x800300FD | An unexpected error occurred. |
| STG_E_UNIMPLEMENTEDFUNCTION 0x800300FE | That function is not implemented. |
| STG_E_INVALIDFLAG 0x800300FF | Invalid flag error. |
| STG_E_INUSE 0x80030100 | Attempted to use an object that is busy. |
| STG_E_NOTCURRENT 0x80030101 | The storage has been changed since the last commit. |
| STG_E_REVERTED 0x80030102 | Attempted to use an object that has ceased to exist. |
| STG_E_CANTSAVE 0x80030103 | Can't save. |
| STG_E_OLDFORMAT 0x80030104 | The compound file %1 was produced with an incompatible version of storage. |
| STG_E_OLDDLL 0x80030105 | The compound file %1 was produced with a newer version of storage. |
| STG_E_SHAREREQUIRED 0x80030106 | Share.exe or equivalent is required for operation. |
| STG_E_NOTFILEBASEDSTORAGE 0x80030107 | Illegal operation called on non-file based storage. |
| STG_E_EXTANTMARSHALLINGS 0x80030108 | Illegal operation called on object with extant marshallings. |
| STG_E_DOCFILECORRUPT 0x80030109 | The docfile has been corrupted. |
| STG_E_BADBASEADDRESS 0x80030110 | OLE32.DLL has been loaded at the wrong address. |
| STG_E_DOCFILETOOLARGE 0x80030111 | The compound file is too large for the current implementation |
| STG_E_NOTSIMPLEFORMAT 0x80030112 | The compound file was not created with the STGM_SIMPLE flag |
| STG_E_INCOMPLETE 0x80030201 | The file download was aborted abnormally. The file is incomplete. |
| STG_E_TERMINATED 0x80030202 | The file download has been terminated. |
| STG_S_CONVERTED 0x00030200 | The underlying file was converted to compound file format. |
| STG_S_BLOCK 0x00030201 | The storage operation should block until more data is available. |
| STG_S_RETRYNOW 0x00030202 | The storage operation should retry immediately. |
| STG_S_MONITORING 0x00030203 | The notified event sink will not influence the storage operation. |
| STG_S_MULTIPLEOPENS 0x00030204 | Multiple opens prevent consolidated. (commit succeeded). |
| STG_S_CONSOLIDATIONFAILED 0x00030205 | Consolidation of the storage file failed. (commit succeeded). |
| STG_S_CANNOTCONSOLIDATE 0x00030206 | Consolidation of the storage file is inappropriate. (commit succeeded). |
| STG_E_STATUS_COPY_PROTECTION_FAILURE 0x80030305 | Generic Copy Protection Error. |
| STG_E_CSS_AUTHENTICATION_FAILURE 0x80030306 | Copy Protection Error - DVD CSS Authentication failed. |
| STG_E_CSS_KEY_NOT_PRESENT 0x80030307 | Copy Protection Error - The given sector does not have a valid CSS key. |
| STG_E_CSS_KEY_NOT_ESTABLISHED 0x80030308 | Copy Protection Error - DVD session key not established. |
| STG_E_CSS_SCRAMBLED_SECTOR 0x80030309 | Copy Protection Error - The read failed because the sector is encrypted. |
| STG_E_CSS_REGION_MISMATCH 0x8003030A | Copy Protection Error - The current DVD's region does not correspond to the region setting of the drive. |
| STG_E_RESETS_EXHAUSTED 0x8003030B | Copy Protection Error - The drive's region setting may be permanent or the number of user resets has been exhausted. |
| RPC_E_CALL_REJECTED 0x80010001 | Call was rejected by callee. |
| RPC_E_CALL_CANCELED 0x80010002 | Call was canceled by the message filter. |
| RPC_E_CANTPOST_INSENDCALL 0x80010003 | The caller is dispatching an intertask SendMessage call and cannot call out via PostMessage. |
| RPC_E_CANTCALLOUT_INASYNCCALL 0x80010004 | The caller is dispatching an asynchronous call and cannot make an outgoing call on behalf of this call. |
| RPC_E_CANTCALLOUT_INEXTERNALCALL 0x80010005 | It is illegal to call out while inside message filter. |
| RPC_E_CONNECTION_TERMINATED 0x80010006 | The connection terminated or is in a bogus state and cannot be used any more. Other connections are still valid. |
| RPC_E_SERVER_DIED 0x80010007 | The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed. |
| RPC_E_CLIENT_DIED 0x80010008 | The caller (client) disappeared while the callee (server) was processing a call. |
| RPC_E_INVALID_DATAPACKET 0x80010009 | The data packet with the marshalled parameter data is incorrect. |
| RPC_E_CANTTRANSMIT_CALL 0x8001000A | The call was not transmitted properly; the message queue was full and was not emptied after yielding. |
| RPC_E_CLIENT_CANTMARSHAL_DATA 0x8001000B | The client (caller) cannot marshal the parameter data - low memory, etc. |
| RPC_E_CLIENT_CANTUNMARSHAL_DATA 0x8001000C | The client (caller) cannot unmarshal the return data - low memory, etc. |
| RPC_E_SERVER_CANTMARSHAL_DATA 0x8001000D | The server (callee) cannot marshal the return data - low memory, etc. |
| RPC_E_SERVER_CANTUNMARSHAL_DATA 0x8001000E | The server (callee) cannot unmarshal the parameter data - low memory, etc. |
| RPC_E_INVALID_DATA 0x8001000F | Received data is invalid; could be server or client data. |
| RPC_E_INVALID_PARAMETER 0x80010010 | A particular parameter is invalid and cannot be (un)marshalled. |
| RPC_E_CANTCALLOUT_AGAIN 0x80010011 | There is no second outgoing call on same channel in DDE conversation. |
| RPC_E_SERVER_DIED_DNE 0x80010012 | The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute. |
| RPC_E_SYS_CALL_FAILED 0x80010100 | System call failed. |
| RPC_E_OUT_OF_RESOURCES 0x80010101 | Could not allocate some required resource (memory, events, ...) |
| RPC_E_ATTEMPTED_MULTITHREAD 0x80010102 | Attempted to make calls on more than one thread in single threaded mode. |
| RPC_E_NOT_REGISTERED 0x80010103 | The requested interface is not registered on the server object. |
| RPC_E_FAULT 0x80010104 | RPC could not call the server or could not return the results of calling the server. |
| RPC_E_SERVERFAULT 0x80010105 | The server threw an exception. |
| RPC_E_CHANGED_MODE 0x80010106 | Cannot change thread mode after it is set. |
| RPC_E_INVALIDMETHOD 0x80010107 | The method called does not exist on the server. |
| RPC_E_DISCONNECTED 0x80010108 | The object invoked has disconnected from its clients. |
| RPC_E_RETRY 0x80010109 | The object invoked chose not to process the call now. Try again later. |
| RPC_E_SERVERCALL_RETRYLATER 0x8001010A | The message filter indicated that the application is busy. |
| RPC_E_SERVERCALL_REJECTED 0x8001010B | The message filter rejected the call. |
| RPC_E_INVALID_CALLDATA 0x8001010C | A call control interfaces was called with invalid data. |
| RPC_E_CANTCALLOUT_ININPUTSYNCCALL 0x8001010D | An outgoing call cannot be made since the application is dispatching an input-synchronous call. |
| RPC_E_WRONG_THREAD 0x8001010E | The application called an interface that was marshalled for a different thread. |
| RPC_E_THREAD_NOT_INIT 0x8001010F | CoInitialize has not been called on the current thread. |
| RPC_E_VERSION_MISMATCH 0x80010110 | The version of OLE on the client and server machines does not match. |
| RPC_E_INVALID_HEADER 0x80010111 | OLE received a packet with an invalid header. |
| RPC_E_INVALID_EXTENSION 0x80010112 | OLE received a packet with an invalid extension. |
| RPC_E_INVALID_IPID 0x80010113 | The requested object or interface does not exist. |
| RPC_E_INVALID_OBJECT 0x80010114 | The requested object does not exist. |
| RPC_S_CALLPENDING 0x80010115 | OLE has sent a request and is waiting for a reply. |
| RPC_S_WAITONTIMER 0x80010116 | OLE is waiting before retrying a request. |
| RPC_E_CALL_COMPLETE 0x80010117 | Call context cannot be accessed after call completed. |
| RPC_E_UNSECURE_CALL 0x80010118 | Impersonate on unsecure calls is not supported. |
| RPC_E_TOO_LATE 0x80010119 | Security must be initialized before any interfaces are marshalled or unmarshalled. It cannot be changed once initialized. |
| RPC_E_NO_GOOD_SECURITY_PACKAGES 0x8001011A | No security packages are installed on this machine or the user is not logged on or there are no compatible security packages between the client and server. |
| RPC_E_ACCESS_DENIED 0x8001011B | Access is denied. |
| RPC_E_REMOTE_DISABLED 0x8001011C | Remote calls are not allowed for this process. |
| RPC_E_INVALID_OBJREF 0x8001011D | The marshaled interface data packet (OBJREF) has an invalid or unknown format. |
| RPC_E_NO_CONTEXT 0x8001011E | No context is associated with this call. This happens for some custom marshalled calls and on the client side of the call. |
| RPC_E_TIMEOUT 0x8001011F | This operation returned because the timeout period expired. |
| RPC_E_NO_SYNC 0x80010120 | There are no synchronize objects to wait on. |
| RPC_E_FULLSIC_REQUIRED 0x80010121 | Full subject issuer chain SSL principal name expected from the server. |
| RPC_E_INVALID_STD_NAME 0x80010122 | Principal name is not a valid MSSTD name. |
| CO_E_FAILEDTOIMPERSONATE 0x80010123 | Unable to impersonate DCOM client |
| CO_E_FAILEDTOGETSECCTX 0x80010124 | Unable to obtain server's security context |
| CO_E_FAILEDTOOPENTHREADTOKEN 0x80010125 | Unable to open the access token of the current thread |
| CO_E_FAILEDTOGETTOKENINFO 0x80010126 | Unable to obtain user info from an access token |
| CO_E_TRUSTEEDOESNTMATCHCLIENT 0x80010127 | The client who called IAccessControl::IsAccessPermitted was not the trustee provided to the method |
| CO_E_FAILEDTOQUERYCLIENTBLANKET 0x80010128 | Unable to obtain the client's security blanket |
| CO_E_FAILEDTOSETDACL 0x80010129 | Unable to set a discretionary ACL into a security descriptor |
| CO_E_ACCESSCHECKFAILED 0x8001012A | The system function, AccessCheck, returned false |
| CO_E_NETACCESSAPIFAILED 0x8001012B | Either NetAccessDel or NetAccessAdd returned an error code. |
| CO_E_WRONGTRUSTEENAMESYNTAX 0x8001012C | One of the trustee strings provided by the user did not conform to the <Domain>\<Name> syntax and it was not the "*" string |
| CO_E_INVALIDSID 0x8001012D | One of the security identifiers provided by the user was invalid |
| CO_E_CONVERSIONFAILED 0x8001012E | Unable to convert a wide character trustee string to a multibyte trustee string |
| CO_E_NOMATCHINGSIDFOUND 0x8001012F | Unable to find a security identifier that corresponds to a trustee string provided by the user |
| CO_E_LOOKUPACCSIDFAILED 0x80010130 | The system function, LookupAccountSID, failed |
| CO_E_NOMATCHINGNAMEFOUND 0x80010131 | Unable to find a trustee name that corresponds to a security identifier provided by the user |
| CO_E_LOOKUPACCNAMEFAILED 0x80010132 | The system function, LookupAccountName, failed |
| CO_E_SETSERLHNDLFAILED 0x80010133 | Unable to set or reset a serialization handle |
| CO_E_FAILEDTOGETWINDIR 0x80010134 | Unable to obtain the Windows directory |
| CO_E_PATHTOOLONG 0x80010135 | Path too long |
| CO_E_FAILEDTOGENUUID 0x80010136 | Unable to generate a uuid. |
| CO_E_FAILEDTOCREATEFILE 0x80010137 | Unable to create file |
| CO_E_FAILEDTOCLOSEHANDLE 0x80010138 | Unable to close a serialization handle or a file handle. |
| CO_E_EXCEEDSYSACLLIMIT 0x80010139 | The number of ACEs in an ACL exceeds the system limit. |
| CO_E_ACESINWRONGORDER 0x8001013A | Not all the DENY_ACCESS ACEs are arranged in front of the GRANT_ACCESS ACEs in the stream. |
| CO_E_INCOMPATIBLESTREAMVERSION 0x8001013B | The version of ACL format in the stream is not supported by this implementation of IAccessControl |
| CO_E_FAILEDTOOPENPROCESSTOKEN 0x8001013C | Unable to open the access token of the server process |
| CO_E_DECODEFAILED 0x8001013D | Unable to decode the ACL in the stream provided by the user |
| CO_E_ACNOTINITIALIZED 0x8001013F | The COM IAccessControl object is not initialized |
| CO_E_CANCEL_DISABLED 0x80010140 | Call Cancellation is disabled |
| RPC_E_UNEXPECTED 0x8001FFFF | An internal error occurred. |
Requirements
| Requirement | Value |
|---|---|
| Header | Winerror.h |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
