This class is the event type class for network interface card configuration events.
The following syntax is simplified from MOF code.
Syntax
[EventType(13), EventTypeName("NIC")]
class SystemConfig_V0_NIC : SystemConfig_V0
{
char16 NICName[];
uint32 Index;
uint32 PhysicalAddrLen;
char16 PhysicalAddr;
uint32 Size;
sint32 IpAddress;
sint32 SubnetMask;
sint32 DhcpServer;
sint32 Gateway;
sint32 PrimaryWinsServer;
sint32 SecondaryWinsServer;
sint32 DnsServer1;
sint32 DnsServer2;
sint32 DnsServer3;
sint32 DnsServer4;
uint32 Data;
};
Members
The SystemConfig_V0_NIC class has these types of members:
Properties
The SystemConfig_V0_NIC class has these properties.
Data
Data type: uint32
Access type: Read-only
Qualifiers: WmiDataId (16)
Data field.
DhcpServer
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (8)
IP address of the dynamic host configuration protocol (DHCP) server. A value of 255.255.255.255 indicates the DHCP server could not be reached, or is in the process of being reached. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
DnsServer1
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (12)
First server IP addresses to be used in querying for DNS servers. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
DnsServer2
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (13)
Second server IP addresses to be used in querying for DNS servers. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
DnsServer3
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (14)
Third server IP addresses to be used in querying for DNS servers. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
DnsServer4
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (15)
Fourth server IP addresses to be used in querying for DNS servers. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
Gateway
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (9)
IP address of default gateway that the computer system uses. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
Index
Data type: uint32
Access type: Read-only
Qualifiers: WmiDataId (2)
Adapter index. The adapter index may change when an adapter is disabled and then enabled, or under other circumstances, and should not be considered persistent.
IpAddress
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (6)
IP addresses associated with the network interface card. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
NICName
Data type: char16 array
Access type: Read-only
Qualifiers: WmiDataId (1), Max (256)
Name of the network interface card.
PhysicalAddr
Data type: char16
Access type: Read-only
Qualifiers: WmiDataId (4), Max (8)
Hardware address for the adapter.
PhysicalAddrLen
Data type: uint32
Access type: Read-only
Qualifiers: WmiDataId (3)
Length of the hardware address for the adapter.
PrimaryWinsServer
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (10)
IP address for the primary WINS server. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
SecondaryWinsServer
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (11)
IP address for the secondary WINS server. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
Size
Data type: uint32
Access type: Read-only
Qualifiers: WmiDataId (5)
Size, in bytes, of the Data property.
SubnetMask
Data type: sint32
Access type: Read-only
Qualifiers: WmiDataId (7)
Subnet mask associated with the network interface card. Each byte of the sint32 represents one of the four parts of the IP address (p1.p2.p3.p4). The low-order byte contains the value for p1, the next byte contains the value for p2, and so on.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | None supported |
| Minimum supported server | Windows Server 2003 [desktop apps only] |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
