大网数据广告活动
磁盘与文件系统

JetReadFileInstance Function

· 52CE 我爱测

Learn more about: JetReadFileInstance Function

Applies to: Windows | Windows Server

JetReadFileInstance Function

The JetReadFileInstance function retrieves the contents of a file opened with the JetOpenFileInstance function.

Windows XP:   JetReadFileInstance is introduced in Windows XP.

    JET_ERR JET_API JetReadFileInstance(
      __in          JET_INSTANCE instance,
      __in          JET_HANDLE hfFile,
      __out         void* pv,
      __in          unsigned long cb,
      __out_opt     unsigned long* pcb
    );

Parameters

instance

The instance to use for a particular API call.

Note that for Windows 2000, the API variant that accepts this parameter is not available because only one instance is supported. The use of this one global instance is implied in this case.

For Windows XP and later releases, you can call the API variant that does not accept this parameter only when the engine is in legacy mode (Windows 2000 compatibility mode) in cases where only one instance is supported. Otherwise, the operation will fail and return the JET_errRunningInMultiInstanceMode error.

hfFile

The handle of the file to be read.

pv

The output buffer that will receive the file data.

cb

The maximum size, in bytes, of the output buffer.

pcb

The actual amount of file data retrieved.

Return Value

This function facilitates the return of any JET_ERR data types that are defined in the Extensible Storage Engine (ESE) API. For more information about JET errors, see Extensible Storage Engine Errors and Error Handling Parameters.

Return code Meaning
JET_errSuccess The operation completed successfully.
JET_errBackupAbortByServer The operation failed because the current external backup has been aborted by a call to the <a href="gg269240(v=exchg.10).md">JetStopService</a> function. This error will be returned only by Windows XP and later Windows versions.
JET_errClientRequestToStopJetService It is not possible to complete the operation because all activity on the instance associated with the session has ceased as a result of a call to the <a href="gg269240(v=exchg.10).md">JetStopService</a> function.
JET_errInstanceUnavailable It is not possible to complete the operation because the instance associated with the session has encountered a fatal error requiring that access to all data be revoked to protect the integrity of that data. This error will be returned only by Windows XP and later Windows versions.
JET_errInvalidParameter One of the specified parameters contained either an unexpected value or a value that did not make sense when combined with the value of another parameter. This can happen for the JetReadFileInstance function when any of the following occurs:<ul><li>The specified instance handle is invalid. Windows XP and later Windows versions.</li><li>The output buffer size is not a multiple of the database page size (<a href="gg269337(v=exchg.10).md">JET_paramDatabasePageSize</a>). Windows XP and later Windows versions.</li><li>The output buffer size is smaller than three database pages (<a href="gg269337(v=exchg.10).md">JET_paramDatabasePageSize</a>), and this is the first call to the JetReadFileInstance function for the specified handle. Windows XP and later Windows versions.</li></ul>
JET_errLogReadVerifyFailure The operation failed because unrecoverable data corruption was detected while reading a transaction log file. This error will be returned only by Windows XP and later Windows versions.
JET_errNoBackup The operation failed because no external backup is in progress.
JET_errNotInitialized It is not possible to complete the operation because the instance associated with this session has not been initialized yet.
JET_errReadVerifyFailure The operation failed because unrecoverable data corruption was detected while reading a database page from a database file or database patch file.
JET_errRestoreInProgress It is not possible to complete the operation because a restore operation is in progress on the instance associated with this session.
JET_errRunningInMultiInstanceMode The operation failed because an attempt was made to use the engine in legacy mode (Windows 2000 compatibility mode) in a case where only one instance is supported but multiple instances already exist.
JET_errTermInProgress It is not possible to complete the operation because the instance associated with this session is being shut down.

On success, the next chunk of data from the file will be read into the output buffer. The actual number of bytes retrieved will also be returned. The file offset at which the next read will occur will be advanced by this amount.

On failure, the state of the output buffer is undefined. The failure will result in the cancellation of the entire backup process for the current instance. In Windows XP and later Windows versions, the backup will not be canceled if an error occurred while reading a database file. However, the backup of that database file will still be canceled and the corresponding handle will automatically be closed.

Remarks

Any call to the JetReadFileInstance function made by using a handle that has already returned all the data in the underlying file (such as if a previous call returned fewer bytes than the size of the output buffer) will always succeed but will return zero bytes of data.

You should use a large output buffer to maximize backup performance. You might need to experiment to find the optimal tradeoff between resource consumption and throughput for a particular situation. In any case, the output buffer should be no smaller than 64 KB. The pointer that you pass to JetReadFileInstance must be aligned with a memory page boundary (either 4 KB or 8 KB). You can do this by calling the VirtualAlloc function.

Multiple concurrent calls to JetReadFileInstance made by using the same file handle are not supported. This means that it is not possible to queue several buffers for concurrent reading against the same file to achieve high sequential throughput. You should use a single large buffer instead.

If you have configured a particular instance such that database page scrubbing is enabled (see the JET_paramCircularLog parameter in System Parameters), deleted data will be removed from the database as a side-effect of a call to JetReadFileInstance against the database file.

It is very important to understand how backup and data corruption interact. If the database engine detects data corruption during a backup, it will fail the backup of either the affected database or the entire instance. This is a conscious design decision intended to protect against data loss. If the database engine allowed a backup to succeed where data corruption was present, it is possible that an older, uncorrupted backup could be discarded as a result. This would be unfortunate because then it would be possible to fix the data corruption on the live instance by restoring that backup and replaying all the transaction log files against that database. This zero-data-loss scenario presumes that circular logging is not enabled (see JET_paramCircularLog in System Parameters).

It is also important to understand that cases of data corruption are usually first detected during streaming backup. This is because streaming backup is the only process that routinely scans every single page of the database file. It is also likely that streaming backup will be the first process to detect the early signs of hardware failure as manifested by intermittent data corruption errors, because of both the amount of data retrieved by backup and the speed at which that data is retrieved.

Data corruption is detected by the database engine through the use of block checksums. These checksums are set just before a database page write and are verified on a database page read. This scheme enables the database engine to determine that data has been corrupted at some point, but it does not enable the database engine to determine the source of that corruption. Historically, instances of such data corruption have originated from sources other than the database engine itself.

Requirements
Requirement Value
Client Requires Windows Vista or Windows XP.
Server Requires Windows Server 2008 or Windows Server 2003.
Header Is declared in Esent.h.
Library Uses ESENT.lib.
DLL Requires ESENT.dll.
See Also

JET_ERR
JET_HANDLE
JET_INSTANCE
JetOpenFileInstance
JetStopService
System Parameters

Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Win32 documentation
适用范围
Windows Win32 API · Source date 04/11/2016
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。