大网数据广告活动
磁盘与文件系统

Disk Management Control Codes

· 52CE 我爱测

Control codes used in disk management.

The following table identifies the control codes that are used in disk management.

In this section

Control Code Description
IOCTL_DISK_ARE_VOLUMES_READY Waits for all volumes on the specified disk to be ready for use.
IOCTL_DISK_CREATE_DISK Initializes the specified disk and disk partition table using the information in the CREATE_DISK structure.
IOCTL_DISK_DELETE_DRIVE_LAYOUT Removes the boot signature from the master boot record, so that the disk will be formatted from sector zero to the end of the disk.
IOCTL_DISK_FORMAT_TRACKS Formats a specified, contiguous set of tracks on a floppy disk. To provide additional parameters, use IOCTL_DISK_FORMAT_TRACKS_EX instead.
IOCTL_DISK_FORMAT_TRACKS_EX Formats a specified, contiguous set of tracks on a floppy disk.
IOCTL_DISK_GET_CACHE_INFORMATION Retrieves the disk cache configuration data.
IOCTL_DISK_GET_CLUSTER_INFO Retrieves the attributes of the specified disk device.
IOCTL_DISK_GET_DISK_ATTRIBUTES Retrieves the attributes of the specified disk device.
IOCTL_DISK_GET_DRIVE_GEOMETRY Retrieves information about the physical disk's geometry: type, number of cylinders, tracks per cylinder, sectors per track, and bytes per sector.
IOCTL_DISK_GET_DRIVE_GEOMETRY_EX Retrieves extended information about the physical disk's geometry: type, number of cylinders, tracks per cylinder, sectors per track, and bytes per sector.
IOCTL_DISK_GET_DRIVE_LAYOUT Retrieves information for each entry in the partition tables for a disk.
IOCTL_DISK_GET_DRIVE_LAYOUT_EX Retrieves extended information for each entry in the partition tables for a disk.
IOCTL_DISK_GET_LENGTH_INFO Retrieves the length of the specified disk, volume, or partition.
IOCTL_DISK_GET_PARTITION_INFO Retrieves information about the type, size, and nature of a disk partition.
IOCTL_DISK_GET_PARTITION_INFO_EX Retrieves extended information about the type, size, and nature of a disk partition.
IOCTL_DISK_GROW_PARTITION Enlarges the specified partition.
IOCTL_DISK_IS_WRITABLE Determines whether the specified disk is writable.
IOCTL_DISK_PERFORMANCE Enables performance counters that provide disk performance information.
IOCTL_DISK_PERFORMANCE_OFF Disables the performance counters that provide disk performance information.
IOCTL_DISK_REASSIGN_BLOCKS Directs the disk device to map one or more blocks to its spare-block pool.
IOCTL_DISK_REASSIGN_BLOCKS_EX Directs the disk device to map one or more blocks to its spare-block pool.
IOCTL_DISK_RESET_SNAPSHOT_INFO Clears all Volume Shadow Copy Service (VSS) hardware-based shadow copy (also called "snapshot") information from the disk. To perform this operation, call the DeviceIoControl function with the following parameters.
IOCTL_DISK_SET_CACHE_INFORMATION Sets the disk configuration data.
IOCTL_DISK_SET_CLUSTER_INFO Sets the cluster information on a disk.
IOCTL_DISK_SET_DISK_ATTRIBUTES Sets the attributes of the specified disk device.
IOCTL_DISK_SET_DRIVE_LAYOUT Partitions a disk as specified by drive layout and partition information data.
IOCTL_DISK_SET_DRIVE_LAYOUT_EX Partitions a disk according to the specified drive layout and partition information data.
IOCTL_DISK_SET_PARTITION_INFO Sets partition information for the specified disk partition.
IOCTL_DISK_SET_PARTITION_INFO_EX Sets partition information for the specified disk partition, including layout information for AT and EFI (Extensible Firmware Interface) partitions.
IOCTL_DISK_UPDATE_PROPERTIES Invalidates the cached partition table and re-enumerates the device.
IOCTL_DISK_VERIFY Verifies the specified extent on a fixed disk.
IOCTL_STORAGE_DEVICE_POWER_CAP Windows applications can use this control code to specify a maximum operational power consumption level for a storage device. The OS will do it's best to transition the device to a power state that will not exceed the given maximum. However, this depends on what the device supports. The actual maximum may be less than or greater than the desired maximum. To perform this operation, call the DeviceIoControl function with the following parameters.
IOCTL_STORAGE_FIRMWARE_ACTIVATE Windows applications can use this control code to activate a firmware image on a specified device. To perform this operation, call the DeviceIoControl function with the following parameters.
IOCTL_STORAGE_FIRMWARE_DOWNLOAD Windows applications can use this control code to download a firmware image to the target device, but not activate it. If the image to be downloaded is larger than the controller s maximum data transfer size, this IOCTL will have to be called multiple times until the entire image is downloaded. To perform this operation, call the DeviceIoControl function with the following parameters.
IOCTL_STORAGE_FIRMWARE_GET_INFO Windows applications can use this control code to query the storage device for detailed firmware information. A successful call will return information about firmware revisions, activity status, as well as read/write attributes for each slot. The amount of data returned will vary based on storage protocol. To perform this operation, call the DeviceIoControl function with the following parameters.
IOCTL_STORAGE_PROTOCOL_COMMAND Windows applications can use this control code to return properties of a storage device or adapter. The request indicates the kind of information to retrieve, such as inquiry data for a device or capabilities and limitations of an adapter.
IOCTL_STORAGE_QUERY_PROPERTY Windows applications can use this control code to return the properties of a storage device or adapter. The request indicates the kind of information to retrieve, such as the inquiry data for a device or the capabilities and limitations of an adapter. IOCTL_STORAGE_QUERY_PROPERTY can also be used to determine whether the port driver supports a particular property or which fields in the property descriptor can be modified with a subsequent change-property request.
IOCTL_STORAGE_SET_TEMPERATURE_THRESHOLD Windows applications can use this control code to set the temperature threshold of a device (when it's supported by the device).

The following control codes are obsolete:

IOCTL_DISK_CONTROLLER_NUMBER
IOCTL_DISK_GET_DRIVE_GEOMETRY
IOCTL_DISK_GET_DRIVE_LAYOUT
IOCTL_DISK_GET_PARTITION_INFO
IOCTL_DISK_HISTOGRAM_DATA
IOCTL_DISK_HISTOGRAM_RESET
IOCTL_DISK_HISTOGRAM_STRUCTURE
IOCTL_DISK_LOGGING
IOCTL_DISK_REQUEST_DATA
IOCTL_DISK_REQUEST_STRUCTURE
IOCTL_DISK_SET_DRIVE_LAYOUT
IOCTL_DISK_SET_PARTITION_INFO

Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Win32 documentation
适用范围
Windows Win32 API · Source date 05/31/2018
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。