Windows Filtering Platform (WFP) specific error codes are as follows.
FWP_E_CALLOUT_NOT_FOUND
0x80320001
The callout does not exist.
FWP_E_CONDITION_NOT_FOUND
0x80320002
The filter condition does not exist.
FWP_E_FILTER_NOT_FOUND
0x80320003
The filter does not exist.
FWP_E_LAYER_NOT_FOUND
0x80320004
The layer does not exist.
FWP_E_PROVIDER_NOT_FOUND
0x80320005
The provider does not exist.
FWP_E_PROVIDER_CONTEXT_NOT_FOUND
0x80320006
The provider context does not exist.
FWP_E_SUBLAYER_NOT_FOUND
0x80320007
The sub-layer does not exist.
FWP_E_NOT_FOUND
0x80320008
The object does not exist.
The IPsecSaContext* functions return this error if the SA context ID is not found.
FWP_E_ALREADY_EXISTS
0x80320009
An object with that GUID or LUID already exists.
FWP_E_IN_USE
0x8032000A
The object is referenced by other objects, so it cannot be deleted.
FWP_E_DYNAMIC_SESSION_IN_PROGRESS
0x8032000B
The call is not allowed from within a dynamic session.
FWP_E_WRONG_SESSION
0x8032000C
The call was made from the wrong session, so it cannot be completed.
FWP_E_NO_TXN_IN_PROGRESS
0x8032000D
The call must be made from within an explicit transaction.
FWP_E_TXN_IN_PROGRESS
0x8032000E
The call is not allowed from within an explicit transaction.
FWP_E_TXN_ABORTED
0x8032000F
The explicit transaction has been forcibly canceled.
FWP_E_SESSION_ABORTED
0x80320010
The session has been canceled.
The session handle needs to be closed by calling FwpmEngineClose0, even though it is no longer valid; otherwise, the client-side state will be leaked. A new session should be created by calling FwpmEngineOpen0.
FWP_E_INCOMPATIBLE_TXN
0x80320011
The call is not allowed from within a read-only transaction.
FWP_E_TIMEOUT
0x80320012
The call timed out while waiting to acquire the transaction lock.
FWP_E_NET_EVENTS_DISABLED
0x80320013
The collection of network diagnostic events is disabled.
FWP_E_INCOMPATIBLE_LAYER
0x80320014
The operation is not supported by the specified layer.
FWP_E_KM_CLIENTS_ONLY
0x80320015
The call is allowed for kernel-mode callers only.
FWP_E_LIFETIME_MISMATCH
0x80320016
The call tried to associate two objects with incompatible lifetimes.
See Object Management for more information on object lifetime and object association.
FWP_E_BUILTIN_OBJECT
0x80320017
The object is built-in, so it cannot be deleted.
FWP_E_TOO_MANY_CALLOUTS
0x80320018
The maximum number of callouts has been reached.
At most, 100,000 callouts can be registered at the same time.
FWP_E_NOTIFICATION_DROPPED
0x80320019
A notification could not be delivered because a message queue is at its maximum capacity.
FWP_E_TRAFFIC_MISMATCH
0x8032001A
The network traffic parameters do not match those for the security association context.
IPsecSaContextGetSpi0 can be called multiple times, but the caller must specify the same IPSEC_TRAFFIC0 each time. This error is returned if a subsequent call supplies a different IPSEC_TRAFFIC0.
FWP_E_INCOMPATIBLE_SA_STATE
0x8032001B
The call is not allowed for the current security association (SA) state.
The SA context functions must be called in a specific order:
This error is returned if they are called out of order.
FWP_E_NULL_POINTER
0x8032001C
A required pointer is null.
FWP_E_INVALID_ENUMERATOR
0x8032001D
An enumerator value in a structure is out of range.
FWP_E_INVALID_FLAGS
0x8032001E
The flags field contains an invalid value.
FWP_E_INVALID_NET_MASK
0x8032001F
A network mask is not valid.
FWP_E_INVALID_RANGE
0x80320020
An FWP_RANGE0 structure is not valid.
FWP_E_INVALID_INTERVAL
0x80320021
The time interval is not valid.
FWP_E_ZERO_LENGTH_ARRAY
0x80320022
An array that must contain at least one element has zero length.
FWP_E_NULL_DISPLAY_NAME
0x80320023
The displayData.name field cannot be null.
FWP_E_INVALID_ACTION_TYPE
0x80320024
The action type is not one of the allowed action types for a filter.
FWP_E_INVALID_WEIGHT
0x80320025
The filter weight is not valid.
See Filter Weight Assignment for more information.
FWP_E_MATCH_TYPE_MISMATCH
0x80320026
A filter condition contains a match type that is not compatible with the operands.
See FWP_MATCH_TYPE for more information.
FWP_E_TYPE_MISMATCH
0x80320027
An FWP_VALUE0 structure or an FWPM_CONDITION_VALUE0 structure is of the wrong type.
FWP_E_OUT_OF_BOUNDS
0x80320028
An integer value is outside the allowed range.
FWP_E_RESERVED
0x80320029
A reserved field is nonzero.
FWP_E_DUPLICATE_CONDITION
0x8032002A
A filter cannot contain multiple conditions operating on a single field.
FWP_E_DUPLICATE_KEYMOD
0x8032002B
A policy cannot contain the same keying module more than once.
FWP_E_ACTION_INCOMPATIBLE_WITH_LAYER
0x8032002C
The action type is not compatible with the layer.
FWP_E_ACTION_INCOMPATIBLE_WITH_SUBLAYER
0x8032002D
The action type is not compatible with the sub-layer.
FWP_E_CONTEXT_INCOMPATIBLE_WITH_LAYER
0x8032002E
The raw context or the provider context is not compatible with the layer.
FWP_E_CONTEXT_INCOMPATIBLE_WITH_CALLOUT
0x8032002F
The raw context or the provider context is not compatible with the callout.
FWP_E_INCOMPATIBLE_AUTH_METHOD
0x80320030
The authentication method is not compatible with the policy type.
FWP_E_INCOMPATIBLE_DH_GROUP
0x80320031L
The Diffie-Hellman group is not compatible with the policy type.
FWP_E_EM_NOT_SUPPORTED
0x80320032
An IKE policy cannot contain an Extended Mode policy.
FWP_E_NEVER_MATCH
0x80320033
The enumeration template or subscription will never match any objects.
FWP_E_PROVIDER_CONTEXT_MISMATCH
0x80320034
The provider context is of the wrong type.
FWP_E_INVALID_PARAMETER
0x80320035
The parameter is incorrect.
Possible reasons for this error:
- FwpmIPsecTunnelAdd0 was called without setting the flag FWPM_TUNNEL_FLAG_POINT_TO_POINT and with conditions other than local/remote address.
- An invalid Unicode string, or a Unicode string that contains unprintable characters.
FWP_E_TOO_MANY_SUBLAYERS
0x80320036
The maximum number of sublayers has been reached.
WFP supports at most 2 6 sublayers.
FWP_E_CALLOUT_NOTIFICATION_FAILED
0x80320037
The notification function for a callout returned an error.
FWP_E_INVALID_AUTH_TRANSFORM
0x80320038
The IPsec authentication transform is not valid.
FWP_E_INVALID_CIPHER_TRANSFORM
0x80320039
The IPsec cipher transform is not valid.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows Vista [desktop apps only] |
| Minimum supported server | Windows Server 2008 [desktop apps only] |
| Header | Winerror.h |
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
