Represents a DNS client.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
class MSFT_DNSClient : CIM_DNSProtocolEndpoint
{
string InstanceId;
string Caption;
string ElementName;
datetime InstallDate;
string StatusDescriptions[];
string Status;
uint16 HealthState;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus[];
uint16 PrimaryStatus;
string OtherEnabledState;
uint16 RequestedState;
uint16 EnabledDefault;
uint16 TransitioningToState;
string SystemCreationClassName;
string SystemName;
string CreationClassName;
string Description;
string Name;
uint16 OperationalStatus[];
uint16 EnabledState[];
datetime TimeOfLastStateChange;
string NameFormat;
uint16 ProtocolType[];
uint16 ProtocolIFType;
string OtherTypeDescription;
string Hostname;
uint16 DHCPOptionsToUse[];
uint32 InterfaceIndex;
string InterfaceAlias;
string ConnectionSpecificSuffix;
string ConnectionSpecificSuffixSearchList[];
boolean RegisterThisConnectionsAddress;
boolean UseSuffixWhenRegistering;
};
Members
The MSFT_DNSClient class has these types of members:
Methods
The MSFT_DNSClient class has these methods.
| Method | Description |
|---|---|
| Register | Registers the addresses of the local machine with the DNS server. |
| RequestStateChange | Initiates a requests to change the state of a DNS client. This method is inherited from CIM_EnabledLogicalElement. |
Properties
The MSFT_DNSClient class has these properties.
Caption
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64), Dynamic
Gets the short description of the DNS client.
This property is inherited from CIM_ManagedElement.
CommunicationStatus
Data type: uint16
Access type: Read-only
Gets a value that indicates the ability of the DNS client to communicate with the underlying CIM_ManagedElement object.
This property is inherited from CIM_ManagedSystemElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Not Available |
| 2 | Communication OK |
| 3 | Lost Communication |
| 4 | No Contact |
| 5 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
ConnectionSpecificSuffix
Data type: string
Access type: Read/write
Gets and sets the DNS suffix for a connection to the interface.
ConnectionSpecificSuffixSearchList
Data type: string array
Access type: Read-only
Gets and sets an array that contains the DNS suffix for each connection to the interface.
CreationClassName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256)
Gets the class name of the DNS client instance.
This property is inherited from the CIM_ServiceAccessPoint class.
Description
Data type: string
Access type: Read-only
Qualifiers: Override (Description)
Gets a description of the DNS client.
This property is inherited from the CIM_ProtocolEndpoint class.
DetailedStatus
Data type: uint16
Access type: Read-only
Gets information about the status of the DNS client, in addition to the information provided by the PrimaryStatus property.
This property is inherited from CIM_ManagedSystemElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 0 | Not Available |
| 1 | No Additional Information |
| 2 | Stressed |
| 3 | Predictive Failure |
| 4 | Non-Recoverable Error |
| 5 | Supporting Entity in Error |
| 5 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
DHCPOptionsToUse
Data type: uint16 array
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_DHCPProtocolEndpoint.OptionsReceived, CIM_DNSSettingData.DHCPOptionsToUse)
Gets an array that contains the Dynamic Host Configuration Protocol (DHCP) options that the DNS client uses after a DHCP bind operation.
This property is inherited from the CIM_DNSProtocolEndpoint class.
This property can contain the following values:
| Value | Meaning |
|---|---|
| 8 | Domain Name Server |
| 14 | Host Name |
| 17 | Domain Name |
| 18 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
ElementName
Data type: string
Access type: Read-only
Gets the user-friendly name of the DNS client.
This property is inherited from CIM_ManagedElement.
EnabledDefault
Data type: uint16
Access type: Write-only
Indicates the default startup configuration for the EnabledState property.
Default value: "2". This property is inherited from CIM_EnabledLogicalElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 2 | Enabled |
| 3 | Disabled |
| 5 | Not Applicable |
| 6 | Enabled but Offline |
| 7 | No Default |
| 8 | Quiesce |
| 9 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
EnabledState
Data type: uint16 array
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_EnabledLogicalElement.OtherEnabledState), Override (EnabledState)
Gets an array that indicates whether the DNS client is enabled or in some other related state.
This property is inherited from the CIM_ProtocolEndpoint class.
This property can contain one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Other |
| 2 | Enabled |
| 3 | Disabled |
| 4 | Shutting Down |
| 5 | Reboot |
| 6 | Enabled but Offline |
| 7 | In Test |
| 8 | Deferred |
| 9 | Quiesce |
| 10 | Starting |
| 11 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
HealthState
Data type: uint16
Access type: Read-only
Qualifiers: Experimental
Indicates the current health of the DNS client.
This property is inherited from CIM_ManagedSystemElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 5 | OK |
| 10 | Degraded/Warning |
| 15 | Minor failure |
| 20 | Major failure |
| 25 | Critical failure |
| 30 | Non-recoverable error |
| 31 32767 | DMTF Reserved |
| 32768 65535 | Vendor Specific |
Hostname
Data type: string
Access type: Write-only
Gets the host name of the DNS client connection.
This property is inherited from the CIM_DNSProtocolEndpoint class.
InstallDate
Data type: datetime
Access type: Read-only
Qualifiers: MappingStrings (MIF.DMTF|ComponentID|001.5)
Gets the datetime value that indicates when the DNS client was installed.
This property is inherited from CIM_ManagedSystemElement.
InstanceId
Data type: string
Access type: Read-only
Gets the unique identifier of this object. The ID must be unique within the scope of the instantiating namespace.
This property is inherited from CIM_ManagedElement.
InterfaceAlias
Data type: string
Access type: Read-only
Gets the user-friendly name of the interface.
InterfaceIndex
Data type: uint32
Access type: Read-only
Gets the user-friendly index to the interface.
Name
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256), key, Override (Name)
Gets the ID of the DNS client interface.
This property is inherited from the CIM_ProtocolEndpoint class.
NameFormat
Data type: string
Access type: Read-only
Qualifiers: MaxLen (256)
Gets the structure of the Name property, which ensures that Name is a unique value.
This property is inherited from the CIM_ProtocolEndpoint class.
OperatingStatus
Data type: uint16 array
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_EnabledLogicalElement.EnabledState)
Gets an array that contains information about the operating status of the DNS client, in addition to the information provided by the EnabledState property.
This property is inherited from CIM_ManagedSystemElement.
This property can contain the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Not Available |
| 2 | Servicing |
| 3 | Starting |
| 4 | Stopping |
| 5 | Stopped |
| 6 | Aborted |
| 7 | Dormant |
| 8 | Completed |
| 9 | Migrating |
| 10 | Emigrating |
| 11 | Immigrating |
| 12 | Snapshotting |
| 13 | Shutting Down |
| 14 | In Test |
| 15 | Transitioning |
| 16 | In Service |
| 17 32767 | DMTF Reserved |
| 32768 ... | Vendor Reserved |
OperationalStatus
Data type: uint16 array
Access type: Read-only
Qualifiers: ArrayType (Indexed), ModelCorrespondence (CIM_ManagedSystemElement.StatusDescriptions), Override (OperationalStatus)
Gets the current statuses of the DNS client.
This property is inherited from the CIM_ProtocolEndpoint class.
This property can contain one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Other |
| 2 | OK |
| 3 | Degraded |
| 4 | Stressed |
| 5 | Error |
| 6 | Non-Recoverable Error |
| 7 | Starting |
| 8 | Stopping |
| 9 | Stopped |
| 10 | In Service |
| 11 | |
| 12 | No Contact |
| 13 | Lost Communication |
| 14 | Aborted |
| 15 | Dormant |
| 16 | Supporting Entity Error |
| 17 | Completed |
| 18 | Power Mode |
| 19 32767 | DMTF Reserved |
| 32768 ... | Vendor Reserved |
OtherEnabledState
Data type: string
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_EnabledLogicalElement.EnabledState)
Gets a description of the value of the EnabledState property when it is set to "1" (other).
This property is inherited from CIM_EnabledLogicalElement.
OtherTypeDescription
Data type: string
Access type: Read-only
Qualifiers: MaxLen (64), ModelCorrespondence (CIM_ProtocolEndpoint.ProtocolType, CIM_ProtocolEndpoint.ProtocolIFType)
Gets a string that describes the network protocol to use when the ProtocolIFType property is set to 1 (Other); otherwise, this value must be set to null.
This property is inherited from the CIM_ProtocolEndpoint class.
PrimaryStatus
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_ManagedSystemElement.DetailedStatus, CIM_ManagedSystemElement.HealthState)
Gets the high level status of the DNS client.
This property is inherited from CIM_ManagedSystemElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | OK |
| 2 | Degraded |
| 3 | Error |
| 4 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
ProtocolIFType
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_ProtocolEndpoint.OtherTypeDescription)
Gets the network protocols that are supported by the DNS client.
This property is inherited from the CIM_ProtocolEndpoint class.
This property can contain the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Other |
| 2 | Regular 1822 |
| 3 | HDH 1822 |
| 4 | DDN X.25 |
| 5 | RFC877 X.25 |
| 6 | Ethernet CSMA/CD |
| 7 | ISO 802.3 CSMA/CD |
| 8 | ISO 802.4 Token Bus |
| 9 | ISO 802.5 Token Ring |
| 10 | ISO 802.6 MAN |
| 11 | StarLAN |
| 12 | "Proteon 10Mbit |
| 13 | Proteon 80Mbit |
| 14 | HyperChannel |
| 15 | FDDI |
| 16 | LAP-B |
| 17 | SDLC |
| 18 | DS1 |
| 19 | E1 |
| 20 | Basic ISDN |
| 21 | Primary ISDN |
| 22 | Proprietary Point-to-Point Serial |
| 23 | PPP |
| 24 | Software Loopbac |
| 25 | EON |
| 26 | Ethernet 3Mbit |
| 27 | NSIP |
| 28 | SLIP |
| 29 | Ultra |
| 30 | DS3 |
| 31 | SIP |
| 32 | Frame Relay |
| 33 | RS-232 |
| 34 | Parallel |
| 35 | ARCNet |
| 36 | ARCNet Plus |
| 37 | ATM |
| 38 | MIO X.25 |
| 39 | SONET |
| 40 | X.25 PLE |
| 41 | ISO 802.211c |
| 42 | LocalTalk |
| 43 | SMDS DXI |
| 44 | Frame Relay Service |
| 45 | V.35 |
| 46 | HSSI |
| 47 | HIPPI |
| 48 | Modem |
| 49 | AAL5 |
| 50 | SONET Path |
| 51 | SONET VT |
| 52 | SMDS ICIP |
| 53 | Proprietary Virtual/Internal |
| 54 | Proprietary Multiplexor |
| 55 | IEEE 802.12 |
| 56 | Fibre Channel |
| 57 | HIPPI Interface |
| 58 | Frame Relay Interconnect |
| 59 | ATM Emulated LAN for 802.3 |
| 60 | ATM Emulated LAN for 802.5 |
| 61 | ATM Emulated Circuit |
| 62 | Fast Ethernet (100BaseT) |
| 63 | ISDN |
| 64 | V.11 |
| 65 | V.36 |
| 66 | G703 at 64K |
| 67 | G703 at 2Mb |
| 68 | QLLC |
| 69 | Fast Ethernet 100BaseFX |
| 70 | Channel |
| 71 | IEEE 802.11 |
| 72 | IBM 260/370 OEMI Channel |
| 73 | ESCON |
| 74 | Data Link Switching |
| 75 | ISDN S/T Interface |
| 76 | ISDN U Interface |
| 77 | LAP-D |
| 78 | IP Switch |
| 79 | Remote Source Route Bridging |
| 80 | ATM Logical |
| 81 | DS0 |
| 82 | DS0 Bundle |
| 83 | BSC |
| 84 | Async |
| 85 | Combat Net Radio |
| 86 | ISO 802.5r DTR |
| 87 | Ext Pos Loc Report System |
| 88 | AppleTalk Remote Access Protocol |
| 89 | Proprietary Connectionless |
| 90 | ITU X.29 Host PAD |
| 91 | ITU X.3 Terminal PAD |
| 92 | Frame Relay MPI |
| 93 | ITU X.213 |
| 94 | ADSL |
| 95 | RADSL |
| 96 | SDSL |
| 97 | VDSL |
| 98 | ISO 802.5 CRFP |
| 99 | Myrinet |
| 100 | Voice Receive and Transmit |
| 101 | Voice Foreign Exchange Office |
| 102 | Voice Foreign Exchange Service |
| 103 | Voice Encapsulation |
| 104 | Voice over IP |
| 105 | ATM DXI |
| 106 | ATM FUNI |
| 107 | ATM IMA |
| 108 | PPP Multilink Bundle |
| 109 | IP over CDLC |
| 110 | IP over CLAW |
| 111 | Stack to Stack |
| 112 | Virtual IP Address |
| 113 | MPC |
| 114 | IP over ATM |
| 115 | ISO 802.5j Fibre Token Ring |
| 116 | TDLC |
| 117 | Gigabit Ethernet |
| 118 | HDLC |
| 119 | LAP-F |
| 120 | V.37 |
| 121 | X.25 MLP |
| 122 | X.25 Hunt Group |
| 123 | Transp HDLC |
| 124 | Interleave Channel |
| 125 | FAST Channel |
| 126 | IP (for APPN HPR in IP Networks) |
| 127 | CATV MAC Layer |
| 128 | CATV Downstream |
| 129 | CATV Upstream |
| 130 | Avalon 12MPP Switch |
| 131 | Tunnel |
| 132 | Coffee |
| 133 | Circuit Emulation Service |
| 134 | ATM SubInterface |
| 135 | Layer 2 VLAN using 802.1Q |
| 136 | Layer 3 VLAN using IP |
| 137 | Layer 3 VLAN using IPX |
| 138 | Digital Power Line |
| 139 | Multimedia Mail over IP |
| 140 | DTM |
| 141 | DCN |
| 142 | IP Forwarding |
| 143 | MSDSL |
| 144 | IEEE 1394 |
| 145 | IF-GSN/HIPPI-6400 |
| 146 | DVB-RCC MAC Layer |
| 147 | DVB-RCC Downstream |
| 148 | DVB-RCC Upstream |
| 149 | ATM Virtual |
| 150 | MPLS Tunnel |
| 151 | SRP |
| 152 | Voice over ATM |
| 153 | Voice over Frame Relay |
| 154 | ISDL |
| 155 | Composite Link |
| 156 | SS7 Signaling Link |
| 157 | Proprietary P2P Wireless |
| 158 | Frame Forward |
| 159 | RFC1483 Multiprotocol over ATM |
| 160 | USB |
| 161 | IEEE 802.3ad Link Aggregate |
| 162 | BGP Policy Accounting |
| 163 | FRF .16 Multilink FR |
| 164 | H.323 Gatekeeper |
| 165 | H.323 Proxy |
| 166 | MPLS |
| 167 | Multi-Frequency Signaling Link |
| 168 | HDSL-2 |
| 169 | S-HDSL |
| 170 | DS1 Facility Data Link |
| 171 | Packet over SONET/SDH |
| 172 | DVB-ASI Input |
| 173 | DVB-ASI Output |
| 174 | Power Line |
| 175 | Non Facility Associated Signaling |
| 176 | TR008 |
| 177 | GR303 RDT |
| 178 | GR303 RDT |
| 179 | ISUP |
| 180 | Proprietary Wireless MAC Layer |
| 181 | Proprietary Wireless Downstream |
| 182 | Proprietary Wireless Upstream |
| 183 | HIPERLAN Type 2 |
| 184 | Proprietary Broadband Wireless Access Point to Mulipoint |
| 185 | SONET Overhead Channel |
| 186 | Digital Wrapper Overhead Channel |
| 187 | ATM Adaptation Layer 2 |
| 188 | Radio MAC |
| 189 | ATM Radio |
| 190 | Inter Machine Trunk |
| 191 | MVL DSL |
| 192 | Long Read DSL |
| 193 | Frame Relay DLCI Endpoint |
| 194 | ATM VCI Endpoint |
| 195 | Optical Channel |
| 196 | Optical Transport |
| 197 | Proprietary ATM |
| 198 | Voice over Cable |
| 199 | Infiniband |
| 200 | TE Link |
| 201 | Q.2931 |
| 202 | Virtual Trunk Group |
| 203 | SIP Trunk Group |
| 204 | SIP Signaling |
| 205 | CATV Upstream Channel |
| 206 | Econet |
| 207 | FSAN 155Mb PON |
| 208 | FSAN 622Mb PON |
| 209 | Transparent Bridge |
| 210 | Line Group |
| 211 | Voice E&M Feature Group |
| 212 | Voice FGD EANA |
| 213 | Voice DID |
| 214 | MPEG Transport |
| 215 | 6To4 |
| 216 | GTP |
| 217 | Paradyne EtherLoop 1 |
| 218 | Paradyne EtherLoop 2 |
| 219 | Optical Channel Group |
| 220 | HomePNA |
| 221 | GFP |
| 222 | ciscoISLvlan |
| 223 | actelisMetaLOOP |
| 224 | Fcip |
| 225 4095 | IANA Reserved |
| 4096 | IPv4 |
| 4097 | IPv6 |
| 4098 | IPv4/v6 |
| 4099 | IPX |
| 4100 | DECnet |
| 4101 | SNA |
| 4102 | CONP |
| 4103 | CLNP |
| 4104 | VINES |
| 4105 | XNS |
| 4106 | ISDN B Channel Endpoint |
| 4107 | ISDN D Channel Endpoint |
| 4108 | BGP |
| 4109 | OSPF |
| 4110 | UDP |
| 4111 | TCP |
| 4112 | 802.11a |
| 4113 | 802.11b |
| 4114 | 802.11g |
| 4115 | 802.11h |
| 4200 | NFS |
| 4201 | CIFS |
| 4202 | DAFS |
| 4203 | WebDAV |
| 4204 | HTTP |
| 4205 | FTP |
| 4300 | NDMP |
| 4400 | Telnet |
| 4401 | SSH |
| 4402 | SM CLP |
| 4403 | SMTP |
| 4404 | LDAP |
| 4405 | RDP |
| 4406 | HTTPS |
| 4407 32767 | DMTF Reserved |
| 32768 ... | Vendor Reserved |
ProtocolType
Data type: uint16 array
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_ProtocolEndpoint.OtherTypeDescription), Override (EnabledState), Deprecated (CIM_ProtocolEndpoint.ProtocolIFType)
Note:
This property is deprecated. Instead, we recommend that you use the CIM_ProtocolEndpoint.ProtocolIFType property.
Gets the network protocols that are supported by the DNS client.
This property is inherited from the CIM_ProtocolEndpoint class.
This property can contain the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 1 | Other |
| 2 | IPv4 |
| 3 | IPv6 |
| 4 | IPX |
| 5 | AppleTalk |
| 6 | DECnet |
| 7 | SNA |
| 8 | CONP |
| 9 | CLNP |
| 10 | VINES |
| 11 | XNS |
| 12 | ATM |
| 13 | Frame Relay |
| 14 | Ethernet |
| 15 | TokenRing |
| 16 | FDDI |
| 17 | Infiniband |
| 18 | Fibre Channel |
| 19 | ISDN BRI Endpoint |
| 20 | ISDN B Channel Endpoint |
| 21 | ISDN D Channel Endpoint |
| 22 | IPv4/v6 |
| 23 | BGP |
| 24 | OSPF |
| 25 | MPLS |
| 26 | UDP |
| 27 | TCP |
RegisterThisConnectionsAddress
Data type: boolean
Access type: Read/write
Indicates whether to register the address of the current connection with DNS.
RequestedState
Data type: uint16
Access type: Read-only
Indicates the last requested state of the DNS client. The actual state of the client is represented by the EnabledState property.
Default value: "12".
This property is inherited from CIM_EnabledLogicalElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 2 | Enabled |
| 3 | Disabled |
| 4 | Shut Down |
| 5 | No Change |
| 6 | Offline |
| 7 | Test |
| 8 | Deferred |
| 9 | Quiesce |
| 10 | Reboot |
| 11 | Reset |
| 12 | Not Applicable |
| 13 32767 | DMTF Reserved |
| 32768 65535 | Vendor Reserved |
Status
Data type: string
Access type: Read-only
Qualifiers: MaxLen (10), Deprecated (CIM_ManagedSystemElement.OperationalStatus)
Note:
This property is deprecated. Instead, use OperationalStatus.
Gets the status of the DNS client.
This property is inherited from CIM_ManagedSystemElement.
This property contains one of the following values:
| Value | Meaning |
|---|---|
| OK | The DNS client is functioning without errors. |
| Error | The DNS client experienced an error. |
| Degraded | The DNS client is functioning but some features are turned off. |
| Unknown | The status of the DNS client is unknown. |
| Pred Fail | The DNS client experienced a predictive failure. |
| Starting | The DNS client is being started. |
| Stopping | The DNS client is being shut down. |
| Service | The DNS client is being serviced. |
| Stressed | The DNS client is having performance issues. |
| NonRecover | The DNS client has an error and cannot recover. |
| No Contact | There is no contact with the DNS client. |
| Lost Comm | Communication with the DNS client has been lost. |
| Stopped | The DNS client is not running, however, it might be possible to restart the DNS client. |
StatusDescriptions
Data type: string array
Access type: Read-only
Qualifiers: ArrayType (Indexed), ModelCorrespondence (CIM_ManagedSystemElement.OperationalStatus)
Gets an array of strings that describe the details of the corresponding array values in the OperationalStatus property.
This property is inherited from CIM_ManagedSystemElement.
SystemCreationClassName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256), Propagated (CIM_System.CreationClassName)
Gets the class name of the system object that hosts the DNS client.
This property is inherited from the CIM_ServiceAccessPoint class.
SystemName
Data type: string
Access type: Read-only
Qualifiers: key, MaxLen (256), Propagated (CIM_System.Name)
Gets the name of the system that hosts the DNS client.
This property is inherited from the CIM_ServiceAccessPoint class.
TimeOfLastStateChange
Data type: datetime
Access type: Read-only
Qualifiers: Override (TimeOfLastStateChange)
Gets the datetime value that indicates when the EnabledState property was last changed.
TransitioningToState
Data type: uint16
Access type: Read-only
Qualifiers: ModelCorrespondence (CIM_EnabledLogicalElement.RequestStateChange, CIM_EnabledLogicalElement.RequestedState, CIM_EnabledLogicalElement.EnabledState)
Gets the state to which the DNS client will transition.
This property is inherited from CIM_EnabledLogicalElement.
| Value | Meaning |
|---|---|
| 0 | Unknown |
| 2 | Enabled |
| 3 | Disabled |
| 4 | Shut Down |
| 5 | No Change |
| 6 | Offline |
| 7 | Test |
| 8 | Defer |
| 9 | Quiesce |
| 10 | Reboot |
| 11 | Reset |
| 12 | Not Applicable |
| 13 ... | DMTF Reserved |
UseSuffixWhenRegistering
Data type: boolean
Access type: Read/write
Indicates whether to use the DNS suffix for the connection during DNS registration.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Minimum supported server | Windows Server 2012 |
| Namespace | Root\StandardCimv2 |
| MOF | DnsClientCim.mof |
| DLL | DnsClientCim.dll |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors (upstream author metadata: windowssdkdev). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
