Network adapter Virtual Port settings.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
[Dynamic, Provider("NetAdapterCim")]
class MSFT_NetAdapterVPortSettingData : MSFT_NetAdapterSettingData
{
string Caption;
string Description;
string ElementName;
string InstanceID;
string Name;
string InterfaceDescription;
uint32 Source;
string SystemName;
uint32 VPortID;
string VPortName;
uint32 SwitchID;
uint16 FunctionID;
uint32 NumQueuePairs;
uint32 InterruptModeration;
uint32 VPortState;
uint64 ProcessorAffinityMask;
uint16 ProcessorGroup;
uint32 NumFilters;
string FilterList[];
};
Members
The MSFT_NetAdapterVPortSettingData class has these types of members:
Properties
The MSFT_NetAdapterVPortSettingData class has these properties.
Caption
Data type: string
Access type: Read-only
Qualifiers: MaxLen ( 64 )
A short textual description of the object. This property inherits from CIM_ManagedElement.
Description
Data type: string
Access type: Read-only
A textual description of the object. This property inherits from CIM_ManagedElement.
ElementName
Data type: string
Access type: Read-only
A user-friendly name for the object. This property enables each instance to define a display name in addition to its key properties, identity data, and description information. Be aware that the Name property of ManagedSystemElement is also defined as a display name. However, it is often subclassed to be a Key. The same property can convey both identity and a user-friendly name, without inconsistencies. Where Name exists and is not a Key (such as for instances of LogicalDevice), the same information can be present in both the Name and ElementName properties. This property inherits from CIM_ManagedElement.
FilterList
Data type: string array
Access type: Read-only
An array of MAC address and VLAN ID pair filters set on the VPort.
FunctionID
Data type: uint16
Access type: Read-only
The ID of the attached function. This could be the Vf or the PF ID.
InstanceID
Data type: string
Access type: Read-only
Qualifiers: Key
Within the scope of the instantiating Namespace, InstanceID opaquely and uniquely identifies an instance of this class. To ensure uniqueness within the NameSpace, the value of InstanceID should be constructed using the following "preferred" algorithm: OrgID:LocalID Where OrgID and LocalID are separated by a colon (:), and where OrgID must include a copyrighted, trademarked, or otherwise unique name that is owned by the business entity that is creating or defining the InstanceID or that is a registered ID assigned to the business entity by a recognized global authority. (This requirement is similar to the SchemaName_ClassName structure of Schema class names.) In addition, to ensure uniqueness, OrgID must not contain a colon (:). When using this algorithm, the first colon to appear in InstanceID must appear between OrgID and LocalID. LocalID is chosen by the business entity and should not be reused to identify different underlying (real-world) elements. If the above preferred algorithm is not used, the defining entity must assure that the resulting InstanceID is not reused across any InstanceIDs produced by this or other providers for the NameSpace of this instance. For DMTF-defined instances, the "preferred" algorithm must be used with the OrgID set to CIM.
This property inherits from CIM_SettingData.
InterfaceDescription
Data type: string
Access type: Read-only
Interface Description, also known as "ifDesc" or display name is a unique name assigned to the network adapter during installation. This name cannot be changed and is persisted as long as the network adapter is not uninstalled. This property inherits from MSFT_NetAdapterSettingData.
InterruptModeration
Data type: uint32
Access type: Read-only
The interrupt moderation for the VPort.
Unknown (0)
Adaptive (1)
Off (2)
Low (100)
Medium (200)
High (300)
Name
Data type: string
Access type: Read-only
Name, also known as Connection Name, "ifAlias", or InterfaceAlias, is a unique name assigned to the adapter during installation. The Name of the adapter can be changed by the administrator and is persisted across the boot or network adapter restart. This property inherits from MSFT_NetAdapterSettingData.
NumFilters
Data type: uint32
Access type: Read-only
The number of MAC address and VLAN ID filters set on the queue.
NumQueuePairs
Data type: uint32
Access type: Read-only
The number of queue pairs.
ProcessorAffinityMask
Data type: uint64
Access type: Read-only
A bitmap that specifies the CPU that the queue has affinity with. For example, setting bit 0 indicates CPU 0 is used, setting bit 1 indicates CPU 1 is used, and so on.
ProcessorGroup
Data type: uint16
Access type: Read-only
The group number for the processors specified in ProcessorAffinityMask property.
Source
Data type: uint32
Access type: Read-only
The source of the setting data. This property inherits from MSFT_NetAdapterSettingData.
Unknown (0)
Other (1)
Device (2)
Persistent storage (3)
SwitchID
Data type: uint32
Access type: Read-only
The identifier of the switch.
SystemName
Data type: string
Access type: Read-only
The scoping System\'s Name. This property inherits from MSFT_NetAdapterSettingData.
VPortID
Data type: uint32
Access type: Read-only
The ID of the VPort.
VPortName
Data type: string
Access type: Read-only
The name of the VPort.
VPortState
Data type: uint32
Access type: Read-only
The state of the VPort.
Unknown (0)
Activated (1)
DeActivated (2)
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | None supported |
| Minimum supported server | Windows Server 2012 |
| Namespace | Root\StandardCimv2 |
| MOF | NetAdapterCim.mof |
| DLL | NetAdapterCim.dll |
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors (upstream author metadata: windowssdkdev). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
