Denial of Service Prevention Settings for IPsec.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
class MSFT_NetIPsecDoSPSetting : MSFT_NetSettingData
{
uint32 StateIdleTimeoutSeconds;
uint32 PerIPRateLimitQueueIdleTimeoutSeconds;
uint32 IpV6IPsecUnauthDscp;
uint32 IpV6IPsecUnauthRateLimitBytesPerSec;
uint32 IpV6IPsecUnauthPerIPRateLimitBytesPerSec;
uint16 IpV6IPsecAuthDscp;
uint32 IpV6IPsecAuthRateLimitBytesPerSec;
uint16 IcmpV6Dscp;
uint32 IcmpV6RateLimitBytesPerSec;
uint32 IpV6FilterExemptDscp;
uint32 IpV6FilterExemptRateLimitBytesPerSec;
uint16 DefBlockExemptDscp;
uint32 DefBlockExemptRateLimitBytesPerSec;
uint32 MaxStateEntries;
uint32 MaxPerIPRateLimitQueues;
uint32 EnabledKeyingModules;
uint32 FilteringFlags;
string PublicInterfaceAliases[];
string PrivateInterfaceAliases[];
string PublicV6Address;
string PrivateV6Address;
uint16 EffectiveAddressFamily;
string InstanceID;
string Caption;
string Description;
string ElementName;
};
Members
The MSFT_NetIPsecDoSPSetting class has these types of members:
Properties
The MSFT_NetIPsecDoSPSetting class has these properties.
Caption
Data type: string
Access type: Read-only
Used in CimInstance.ToString(). A short string for describing this instance when debugging.
DefBlockExemptDscp
Data type: uint16
Access type: Read-only
DSCP (RFC 2474) marking for inbound default-block exempted traffic. Value must be less than or equal to 63.
DefBlockExemptRateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Rate limit for inbound default-block exempted traffic.
Description
Data type: string
Access type: Read-only
This field is ignored.
EffectiveAddressFamily
Data type: uint16
Access type: Read-only
The address family(or families) that are currently protected.
IPv4 (1)
IPv6 (2 )
ElementName
Data type: string
Access type: Read-only
This field is ignored.
EnabledKeyingModules
Data type: uint32
Access type: Read-only
One of the enabled keying modules.
IkeV1 (1)
IkeV2 (2)
AuthIp (4 )
FilteringFlags
Data type: uint32
Access type: Read-only
A bitwise combination of the filtering flags.
DisableDefaultBlock (8)
FilterBlock (16)
FilterExempt (32 )
IcmpV6Dscp
Data type: uint16
Access type: Read-only
DSCP (RFC 2474) marking for inbound ICMPv6 traffic. Value must be less than or equal to 63.
IcmpV6RateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Rate limit for inbound ICMPv6 traffic.
InstanceID
Data type: string
Access type: Read-only
A string that uniquely identifies this instance within the PolicyStore.
IpV6FilterExemptDscp
Data type: uint32
Access type: Read-only
DSCP (RFC 2474) marking for inbound IPv6 filter exempted traffic. Value must be less than or equal to 63.
IpV6FilterExemptRateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Rate limit for inbound IPv6 filter exempted traffic.
IpV6IPsecAuthDscp
Data type: uint16
Access type: Read-only
DSCP (RFC 2474) marking for authenticated inbound IPv6 IPsec traffic. Value must be less than or equal to 63.
IpV6IPsecAuthRateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Rate limit for authenticated inbound IPv6 IPsec traffic.
IpV6IPsecUnauthDscp
Data type: uint32
Access type: Read-only
DSCP (RFC 2474) marking for unauthenticated inbound IPv6 IPsec traffic. Value must be less than or equal to 63.
IpV6IPsecUnauthPerIPRateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Per internal IP address rate limit for unauthenticated inbound IPv6 IPsec traffic.
IpV6IPsecUnauthRateLimitBytesPerSec
Data type: uint32
Access type: Read-only
Per internal IP address rate limit for unauthenticated inbound IPv6 IPsec traffic.
MaxPerIPRateLimitQueues
Data type: uint32
Access type: Read-only
Maximum number of per internal IP address rate limit queues for inbound unauthenticated IPv6 IPsec traffic. Value must be greater than 0.
MaxStateEntries
Data type: uint32
Access type: Read-only
Maximum number of state entries in the table. Value must be greater than 0.
PerIPRateLimitQueueIdleTimeoutSeconds
Data type: uint32
Access type: Read-only
Per internal IP address rate limit queue idle timeout in seconds. Value must be greater than 0.
PrivateInterfaceAliases
Data type: string array
Access type: Read-only
Private network interfaces.
PrivateV6Address
Data type: string
Access type: Read-only
Optional private IPv6 address or subnet, for which this policy is specified.
PublicInterfaceAliases
Data type: string array
Access type: Read-only
Public network aliases.
PublicV6Address
Data type: string
Access type: Read-only
Optional public IPv6 address or subnet, for which this policy is specified.
StateIdleTimeoutSeconds
Data type: uint32
Access type: Read-only
State entry idle timeout in seconds. Value must be greater than 0.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Minimum supported server | Windows Server 2012 |
| Namespace | Root\StandardCimv2 |
| MOF | WFasCim.mof |
| DLL | WFasCim.dll |
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors (upstream author metadata: windowssdkdev). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
