Filters traffic based on certain high-level security constraints, like whether or not the traffic is encrypted. Connection Security rules will have to be created in order for traffic to pass the rule.
The following syntax is simplified from Managed Object Format (MOF) code and includes all of the inherited properties.
Syntax
class MSFT_NetNetworkLayerSecurityFilter : CIM_FilterEntryBase
{
uint16 Authentication;
uint16 Encryption;
boolean OverrideBlockRules;
string LocalUsers;
string RemoteUsers;
string RemoteMachines;
string Name;
string SystemCreationClassName;
string SystemName;
string CreationClassName;
boolean IsNegated;
datetime InstallDate;
uint16 OperationalStatus[];
string StatusDescriptions[];
string Status;
uint16 HealthState;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus;
uint16 PrimaryStatus;
string InstanceID;
string Caption;
string Description;
string ElementName;
};
Members
The MSFT_NetNetworkLayerSecurityFilter class has these types of members:
Properties
The MSFT_NetNetworkLayerSecurityFilter class has these properties.
Authentication
Data type: uint16
Access type: Read-only
Whether to require Authentication. NoEncapsulation means that authentication is still required, but only once at the beginning of the traffic flow, instead of on every packet.
NotRequired (0)
Required (1)
NoEncapsulation (2 )
Caption
Data type: string
Access type: Read-only
Used in CimInstance.ToString(). A short string for describing this instance when debugging.
CommunicationStatus
Data type: uint16
Access type: Read-only
This field is ignored.
CreationClassName
Data type: string
Access type: Read-only
Reserved for internal use by the WMI provider only.
Description
Data type: string
Access type: Read-only
This field is ignored.
DetailedStatus
Data type: uint16
Access type: Read-only
This field is ignored.
ElementName
Data type: string
Access type: Read-only
This field is ignored.
Encryption
Data type: uint16
Access type: Read-only
Whether to require Encryption. Dynamic encryption means that the first packet may be protected but not encrypted.
NotRequired (0)
Required (1)
Dynamic (2 )
HealthState
Data type: uint16
Access type: Read-only
This field is ignored.
InstallDate
Data type: datetime
Access type: Read-only
This field is ignored.
InstanceID
Data type: string
Access type: Read-only
A string that uniquely identifies this instance within the PolicyStore.
IsNegated
Data type: boolean
Access type: Read-only
This field is ignored.
LocalUsers
Data type: string
Access type: Read-only
SDDL string describing Local Users that are allowed by this rule. If this is empty, all users are allowed. If LocalUsers/RemoteUsers/RemoteMachines are specified, then they apply conjunctively, and this is an 'Allow-Bypass' rule and ProtectionLevel must be set above None (so that authentication is required).
Name
Data type: string
Access type: Read-only
Reserved for internal use by the WMI provider only.
OperatingStatus
Data type: uint16
Access type: Read-only
This field is ignored.
OperationalStatus
Data type: uint16 array
Access type: Read-only
This field is ignored.
OverrideBlockRules
Data type: boolean
Access type: Read-only
Whether to allow this rule to take precedence over Block rules. This setting may only be applied on Allow rules that require Authentication with specific RemoteUsers and/or RemoteMachines.
PrimaryStatus
Data type: uint16
Access type: Read-only
This field is ignored.
RemoteMachines
Data type: string
Access type: Read-only
SDDL string describing Remote Machines that are allowed by this rule. If this is empty, all users are allowed. If LocalUsers/RemoteUsers/RemoteMachines are specified, then they apply conjunctively, and this is an 'Allow-Bypass' rule and ProtectionLevel must be set above None (so that authentication is required).
RemoteUsers
Data type: string
Access type: Read-only
SDDL string describing Remote Users that are allowed by this rule. If this is empty, all users are allowed. If LocalUsers/RemoteUsers/RemoteMachines are specified, then they apply conjunctively, and this is an 'Allow-Bypass' rule and ProtectionLevel must be set above None (so that authentication is required).
Status
Data type: string
Access type: Read-only
This field is ignored.
StatusDescriptions
Data type: string array
Access type: Read-only
This field is ignored.
SystemCreationClassName
Data type: string
Access type: Read-only
Reserved for internal use by the WMI provider only.
SystemName
Data type: string
Access type: Read-only
Reserved for internal use by the WMI provider only.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Minimum supported server | Windows Server 2012 |
| Namespace | Root\StandardCimv2 |
| MOF | WFasCim.mof |
| DLL | WFasCim.dll |
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors (upstream author metadata: windowssdkdev). Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
