Represents the capabilities and management of memory-related logical devices.
Syntax
[Abstract, Version("2.8.0"), UMLPackagePath("CIM::Device::Memory"), AMENDMENT]
class CIM_Memory : CIM_StorageExtent
{
boolean Volatile;
string ErrorMethodology;
uint64 StartingAddress;
uint64 EndingAddress;
uint16 ErrorInfo;
string OtherErrorDescription;
boolean CorrectableError;
datetime ErrorTime;
uint16 ErrorAccess;
uint32 ErrorTransferSize;
uint8 ErrorData[];
uint16 ErrorDataOrder;
uint64 ErrorAddress;
boolean SystemLevelAddress;
uint64 ErrorResolution;
uint8 AdditionalErrorData[];
};
Members
The CIM_Memory class has these types of members:
Properties
The CIM_Memory class has these properties.
AdditionalErrorData
Data type: uint8 array
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.AdditionalErrorData"), OctetString, MappingStrings ("MIF.DMTF|Memory Device|005.18", "MIF.DMTF|Physical Memory Array|001.13")
An array of octets that contains additional error information. An example is ECC syndrome or the return of the check bits if a CRC-based error methodology is used. In the latter case, if a single bit error is recognized and the CRC algorithm is known, it is possible to determine the exact bit that failed.
If the ErrorInfo property contains "3" (OK), this property is not used.
CorrectableError
Data type: boolean
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.CorrectableError"), MappingStrings ("MIF.DMTF|Physical Memory Array|001.8")
true if the most recent error is correctable; otherwise, false. If the ErrorInfo property contains "3" (OK), this property is not used.
EndingAddress
Data type: uint64
Access type: Read-only
Qualifiers: Units ("KiloBytes"), MappingStrings ("MIF.DMTF|Memory Array Mapped Addresses|001.4", "MIF.DMTF|Memory Device Mapped Addresses|001.5"), PUnit ("byte * 10^3")
The ending address that is referenced by an application or operating system, and mapped by a memory controller for the memory object. The ending address is specified in kilobytes.
ErrorAccess
Data type: uint16
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorAccess"), MappingStrings ("MIF.DMTF|Physical Memory Array|001.10")
The memory access operation that caused the last error. If the ErrorInfo property contains "3" (OK), this property is not used.
Other (1)
Unknown (2)
Read (3)
Write (4)
Partial Write (5)
ErrorAddress
Data type: uint64
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.StartingAddress"), MappingStrings ("MIF.DMTF|Memory Device|005.19", "MIF.DMTF|Physical Memory Array|001.14")
The address of the last memory error. The type of error is described by the ErrorInfo property. If the ErrorInfo property contains "3" (OK), this property is not used.
ErrorData
Data type: uint8 array
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorData"), OctetString, ArrayType ("Indexed"), MappingStrings ("MIF.DMTF|Physical Memory Array|001.12")
An array that contains data captured during the last erroneous memory access. The data occupies the first n octets of the array necessary to hold the number of bits specified by the ErrorTransferSize property.
If the ErrorTransferSize property contains "0" (OK), this property is not used.
ErrorDataOrder
Data type: uint16
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorDataOrder")
The ordering for data stored in the ErrorData property. "Least Significant Byte First" (value=1) or "Most Significant Byte First" (2) can be specified. If the ErrorTransferSize property contains "0" (OK), this property is not used.
Unknown (0)
Least Significant Byte First (1)
Most Significant Byte First (2)
ErrorInfo
Data type: uint16
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorInfo"), MappingStrings ("MIF.DMTF|Memory Device|005.12", "MIF.DMTF|Physical Memory Array|001.8"), ModelCorrespondence ("CIM_Memory.OtherErrorDescription")
The type of the last error to occur.
Other (1)
Unknown (2)
OK (3)
Bad Read (4)
Parity Error (5)
Single-Bit Error (6)
Double-Bit Error (7)
Multi-Bit Error (8)
Nibble Error (9)
Checksum Error (10)
CRC Error (11)
Undefined (12)
Undefined (13)
Undefined (14)
ErrorMethodology
Data type: string
Access type: Read-only
Qualifiers: Override ("ErrorMethodology"), MappingStrings ("MIF.DMTF|Physical Memory Array|001.7")
Indicates whether parity algorithms, CRC algorithms, ECC, or other mechanisms are used by the memory object. Details on the algorithm can also be supplied.
ErrorResolution
Data type: uint64
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorResolution"), Units ("Bytes"), MappingStrings ("MIF.DMTF|Memory Device|005.21", "MIF.DMTF|Physical Memory Array|001.15"), PUnit ("byte")
The range, in bytes, in which the last error can be resolved. For example, if error addresses are resolved to bit 11, such as on a typical page basis; then the errors can be resolved to 4K boundaries, and this property is set to "4000". If the ErrorInfo property contains "3" (OK), this property is not used.
ErrorTime
Data type: datetime
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorTime")
The time when the last memory error occurred. If the ErrorInfo property contains "3" (OK), this property is not used.
ErrorTransferSize
Data type: uint32
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.ErrorTransferSize"), Units ("Bits"), MappingStrings ("MIF.DMTF|Physical Memory Array|001.11"), PUnit ("bit")
The size of the data transfer, in bits, that caused the last error. "0" indicates no error. If the ErrorInfo property contains "3" (OK), this property is not used.
OtherErrorDescription
Data type: string
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.OtherErrorDescription"), ModelCorrespondence ("CIM_Memory.ErrorInfo")
A description of the error type, when the ErrorType property is set to "1" (other).
StartingAddress
Data type: uint64
Access type: Read-only
Qualifiers: Units ("KiloBytes"), MappingStrings ("MIF.DMTF|Memory Array Mapped Addresses|001.3", "MIF.DMTF|Memory Device Mapped Addresses|001.4"), PUnit ("byte * 10^3")
The starting address that is referenced by an application or operating system, and mapped by a memory controller for the memory object. The starting address is specified in kilobytes.
SystemLevelAddress
Data type: boolean
Access type: Read-only
Qualifiers: Deprecated ("CIM_MemoryError.SystemLevelAddress")
true if the address information in the ErrorAddress property is a system-level address, false if it is a physical address.
Volatile
Data type: boolean
Access type: Read-only
true if the memory is volatile; otherwise, false.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 |
| Minimum supported server | Windows Server 2012 |
| Namespace | Root\virtualization\v2 |
| MOF | WindowsVirtualization.V2.mof |
| DLL | Vmms.exe |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
