Represents a hard disk drive inside of a virtual machine. This hard disk drive can be either a pass-through device (if a physical hard disk was attached to the virtual machine) or a synthetic device that is populated with virtual hard disk media. Because virtual and physical hard disks can be added and removed from the virtual machine, there are two resource pools associated with this class, one for pass-through hard disks and the other for virtual hard disks. Hard disks can only be added to or removed from the virtual SCSI controller when the virtual machine is online. Disks can only be added to or removed from the virtual IDE controller when the virtual machine is offline.
The following syntax is simplified Managed Object Format (MOF) code, and it includes all of the inherited properties.
Syntax
[Dynamic, Provider("VmmsWmiInstanceAndMethodProvider"), AMENDMENT]
class Msvm_DiskDrive : CIM_DiskDrive
{
string InstanceID;
string Caption;
string Description;
string ElementName;
datetime InstallDate;
string Name;
uint16 OperationalStatus[];
string StatusDescriptions[];
string Status;
uint16 HealthState = 5;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus;
uint16 PrimaryStatus;
uint16 EnabledState = 2;
string OtherEnabledState;
uint16 RequestedState;
uint16 EnabledDefault;
datetime TimeOfLastStateChange;
uint16 AvailableRequestedStates[];
uint16 TransitioningToState;
string SystemCreationClassName;
string SystemName;
uint16 CreationClassName;
string DeviceID;
boolean PowerManagementSupported;
uint16 PowerManagementCapabilities[];
uint16 Availability;
uint16 StatusInfo;
uint32 LastErrorCode;
string ErrorDescription;
boolean ErrorCleared;
string OtherIdentifyingInfo[];
uint64 PowerOnHours;
uint64 TotalPowerOnHours;
string IdentifyingDescriptions[];
uint16 AdditionalAvailability[] = { 6 };
uint64 MaxQuiesceTime;
uint16 Capabilities[];
string CapabilityDescriptions[];
string ErrorMethodology = "None";
string CompressionMethod = "Not Compressed";
uint32 NumberOfMediaSupported = 1;
uint64 MaxMediaSize = 2000000000;
uint64 DefaultBlockSize = 512;
uint64 MaxBlockSize;
uint64 MinBlockSize = 512;
boolean NeedsCleaning = False;
boolean MediaIsLocked = True;
uint16 Security = 3;
datetime LastCleaned;
uint64 MaxAccessTime = 0;
uint32 UncompressedDataRate;
uint64 LoadTime = 0;
uint64 UnloadTime = 0;
uint64 MountCount = 0;
datetime TimeOfLastMount;
uint64 TotalMountTime = 0;
string UnitsDescription;
uint64 MaxUnitsBeforeCleaning = 0xffffffffffffffff;
uint64 UnitsUsed = 0;
uint32 DriveNumber;
};
Members
The Msvm_DiskDrive class has these types of members:
Methods
The Msvm_DiskDrive class has these methods.
| Method | Description |
|---|---|
| EnableDevice | This method is not supported. |
| LockMedia | Locks or releases the media. |
| OnlineDevice | This method is not supported. |
| QuiesceDevice | This method is not supported. |
| RequestStateChange | Requests a state change. |
| Reset | Resets the virtual device. |
| RestoreProperties | This method is not supported. |
| SaveProperties | This method is not supported. |
| SetPowerState | This method is not supported. |
Properties
The Msvm_DiskDrive class has these properties.
AdditionalAvailability
Data type: uint16 array
Access type: Read-only
This property is inherited from CIM_LogicalDevice, and it is set to 6 (Not Applicable).
Availability
Data type: uint16
Access type: Read-only
This property is inherited from CIM_LogicalDevice.
AvailableRequestedStates
Data type: uint16 array
Access type: Read-only
Indicates the possible values for the RequestedState parameter of the RequestStateChange method. This property is inherited from CIM_EnabledLogicalElement.
Capabilities
Data type: uint16 array
Access type: Read-only
The capabilities of the media access device. This property is inherited from CIM_MediaAccessDevice, and it is set to the following values.
| Value | Meaning |
|---|---|
| 3 | The corresponding entry in CapabilityDescriptions is "Random Access". |
| 4 | The corresponding entry in CapabilityDescriptions is "Supports Writing". |
CapabilityDescriptions
Data type: string array
Access type: Read-only
An array of free-form strings that provides detailed explanations for access device features indicated in the Capabilities property array. Each entry of this array is related to the entry in the Capabilities property array, located at the same index. This property is inherited from CIM_MediaAccessDevice.
Caption
Data type: string
Access type: Read-only
A short description of the object. This property is inherited from CIM_ManagedElement.
CommunicationStatus
Data type: uint16
Access type: Read-only
Indicates the ability of the instrumentation to communicate with the underlying managed element. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Not Available (1)
Communication OK (2)
Lost Communication (3)
No Contact (4)
DMTF Reserved (..)
Vendor Reserved (0x8000.. )
CompressionMethod
Data type: string
Access type: Read-only
A string that indicates the algorithm or tool used to compress the logical file. If the compression scheme is unknown or not described, use "Unknown". If the logical file is compressed, but the compression scheme is unknown or not described, use "Compressed". If the logical file is not compressed, use "Not Compressed". This property is inherited from CIM_MediaAccessDevice, and it is set to "Not Compressed".
CreationClassName
Data type: uint16
Access type: Read-only
The name of the class or subclass used in the creation of an instance. This property is inherited from CIM_LogicalDevice.
DefaultBlockSize
Data type: uint64
Access type: Read-only
The default block size, in bytes, for the device. This property is inherited from CIM_MediaAccessDevice, and it is set to 512.
Description
Data type: string
Access type: Read-only
A description of the object. This property is inherited from CIM_ManagedElement.
DetailedStatus
Data type: uint16
Access type: Read-only
Compliments the PrimaryStatus property with additional status detail. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
Not Available (0)
No Additional Information (1)
Stressed (2)
Predictive Failure (3)
Non-Recoverable Error (4)
Supporting Entity in Error (5)
DMTF Reserved (..)
Vendor Reserved (0x8000.. )
DeviceID
Data type: string
Access type: Read-only
An address or other identifying information to uniquely name the logical device. This property is inherited from CIM_LogicalDevice.
DriveNumber
Data type: uint32
Access type: Read-only
The number of the physical drives on the hosting computer system.
ElementName
Data type: string
Access type: Read-only
A display name for the object. This property is inherited from CIM_ManagedElement.
EnabledDefault
Data type: uint16
Access type: Read-only
An administrator's default or startup configuration for the enabled state of an element. This property is inherited from CIM_EnabledLogicalElement.
EnabledState
Data type: uint16
Access type: Read-only
The enabled and disabled states of an element. It can also indicate the transitions between these requested states. This property is inherited from CIM_EnabledLogicalElement.
| Value | Meaning |
|---|---|
| Unknown 0 | The state of the element could not be determined. |
| Other 1 | |
| Enabled 2 | The element is running. |
| Disabled 3 | The element is turned off. |
| Shutting Down 4 | The element is in the process of going to a Disabled state. |
| Not Applicable 5 | The element does not support being enabled or disabled. |
| Enabled but Offline 6 | The element might be completing commands, and it will drop any new requests. |
| In Test 7 | The element is in a test state. |
| Deferred 8 | The element might be completing commands, but it will queue any new requests. |
| Quiesce 9 | The element is enabled, but it is in a restricted mode. The behavior of the element is similar to the Enabled state (2), but it processes only a restricted set of commands. All other requests are queued. |
| Starting 10 | The element is in the process of going to an Enabled state (2). New requests are queued. |
ErrorCleared
Data type: boolean
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
ErrorDescription
Data type: string
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
ErrorMethodology
Data type: string
Access type: Read-only
A string that describes the types of error detection and correction supported by this device. This property is inherited from CIM_MediaAccessDevice, and it is set to "None".
HealthState
Data type: uint16
Access type: Read-only
The current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. The possible values are 0 to 30, where 5 means the element is entirely healthy and 30 means the element is completely nonfunctional. This property is inherited from CIM_ManagedSystemElement, and it is always set to 5.
IdentifyingDescriptions
Data type: string array
Access type: Read-only
This property is inherited from CIM_LogicalDevice, and it is set to Null.
InstallDate
Data type: datetime
Access type: Read-only
The date and time the virtual machine configuration was created. This property is inherited from CIM_ManagedSystemElement.
InstanceID
Data type: string
Access type: Read-only
Qualifiers: Key
Uniquely identifies an instance of this class. This property is inherited from CIM_ManagedElement.
LastCleaned
Data type: datetime
Access type: Read-only
The date and time when the device was last cleaned. This property is inherited from CIM_MediaAccessDevice, and it is set to Null.
LastErrorCode
Data type: uint32
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
LoadTime
Data type: uint64
Access type: Read-only
The time, in milliseconds, from load to being able to read or write a media. For example, for disk drives, this is the interval between a disk not spinning to the disk reporting that it is ready for read/write (that is, the disk spinning at nominal speeds). For tape drives, this is the time from a media being injected to reporting that it is ready for an application. This is usually at the tape's BOT area. This property is inherited from CIM_MediaAccessDevice and it is set to 0.
MaxAccessTime
Data type: uint64
Access type: Read-only
The time, in milliseconds, to move from the first location on the media to the location that is furthest with respect to time. For a disk drive, this represents full seek and full rotational delay. For tape drives, this represents a search from the beginning of the tape to the most physically distant point. (The end of a tape may be at its most physically distant point, but this is not necessarily true.) This property is inherited from CIM_MediaAccessDevice, and it is set to 0.
MaxBlockSize
Data type: uint64
Access type: Read-only
The maximum block size, in bytes, for media accessed by the device. This property is inherited from CIM_MediaAccessDevice, and it is set to 512 for virtual hard disk drives, variable for pass-through drives.
MaxMediaSize
Data type: uint64
Access type: Read-only
The maximum size, in kilobytes, of media supported by this device. Kilobytes are interpreted as the number of bytes multiplied by 1000 (not the number of bytes multiplied by 1024). This property is inherited from CIM_MediaAccessDevice, and it is set to 2,000,000,000 for virtual hard disk drives, variable for pass-through drives.
MaxQuiesceTime
Data type: uint64
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
MaxUnitsBeforeCleaning
Data type: uint64
Access type: Read-only
The maximum units that can be used before the device should be cleaned. This property is inherited from CIM_MediaAccessDevice, and it is set to 0xffffffffffffffff.
MediaIsLocked
Data type: boolean
Access type: Read-only
True if the media is locked in the device and cannot be ejected; otherwise, False. This property is inherited from CIM_MediaAccessDevice, and it is set to True.
MinBlockSize
Data type: uint64
Access type: Read-only
The minimum block size, in bytes, for media accessed by the device. This property is inherited from CIM_MediaAccessDevice, and it is set to 512.
MountCount
Data type: uint64
Access type: Read-only
For a device that supports removable media, the number of times that media have been mounted for data transfer or to clean the device. For devices accessing nonremovable media, such as hard disks, this property is not applicable and should be set to 0. This property is inherited from CIM_MediaAccessDevice, and it is set to 0.
Name
Data type: string
Access type: Read-only
The label by which the object is known. This property is inherited from CIM_ManagedSystemElement.
NeedsCleaning
Data type: boolean
Access type: Read-only
True if the media access device needs cleaning; otherwise, False. This property is inherited from CIM_MediaAccessDevice, and it is set to False.
NumberOfMediaSupported
Data type: uint32
Access type: Read-only
The maximum number of multiple individual media that can be supported or inserted. This property is inherited from CIM_MediaAccessDevice, and it is set to 1.
OperatingStatus
Data type: uint16
Access type: Read-only
Provides current status information for the operational condition of the element and can be used for providing more detail with respect to the value of the EnabledState property. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
Not Available (1)
Servicing (2)
Starting (3)
Stopping (4)
Stopped (5)
Aborted (6)
Dormant (7)
Completed (8)
Migrating (9)
Emigrating (10)
Immigrating (11)
Snapshotting (12)
Shutting Down (13)
In Test (14)
Transitioning (15)
In Service (16)
DMTF Reserved (..)
Vendor Reserved (0x8000.. )
OperationalStatus
Data type: uint16 array
Access type: Read-only
The current statuses of the object. This property is inherited from CIM_ManagedSystemElement.
OtherEnabledState
Data type: string
Access type: Read-only
The enabled or disabled state of the element when the EnabledState property is set to 1 (Other). This property must be set to Null when EnabledState is any value other than 1. This property is inherited from CIM_EnabledLogicalElement, and it is always set to Null.
OtherIdentifyingInfo
Data type: string array
Access type: Read-only
This property is inherited from CIM_LogicalDevice, and it is set to Null.
PowerManagementCapabilities
Data type: uint16 array
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
PowerManagementSupported
Data type: boolean
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
PowerOnHours
Data type: uint64
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
PrimaryStatus
Data type: uint16
Access type: Read-only
Provides high level status information. This property should be used in conjunction with the DetailedStatus property to provide high level and detailed health status of the element and its subcomponents. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
Unknown (0)
OK (1)
Degraded (2)
Error (3)
DMTF Reserved (..)
Vendor Reserved (0x8000.. )
RequestedState
Data type: uint16
Access type: Read-only
The last requested or desired state for the element. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. A particular instance of CIM_EnabledLogicalElement might not support the RequestStateChange method. If this occurs, the value 12 (Not Applicable) is used. This property is inherited from CIM_EnabledLogicalElement.
Security
Data type: uint16
Access type: Read-only
The operational security defined for the device. This property is inherited from CIM_MediaAccessDevice, and it is set to 3 (None).
Status
Data type: string
Access type: Read-only
This property is inherited from CIM_ManagedSystemElement, but it is not used.
StatusDescriptions
Data type: string array
Access type: Read-only
Strings that describe the various OperationalStatus array values. This property is inherited from CIM_ManagedSystemElement.
StatusInfo
Data type: uint16
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
SystemCreationClassName
Data type: string
Access type: Read-only
The scoping system's creation class name. This property is inherited from CIM_LogicalDevice.
SystemName
Data type: string
Access type: Read-only
The unique identifier for the scoping virtual machine. This property is inherited from CIM_LogicalDevice.
TimeOfLastMount
Data type: datetime
Access type: Read-only
For a device that supports removable media, the most recent date and time that media was mounted on the device. For devices accessing nonremovable media, such as hard disks, this property has no meaning and is not applicable. This property is inherited from CIM_MediaAccessDevice, and it is set to Null.
TimeOfLastStateChange
Data type: datetime
Access type: Read-only
The date or time when the enabled state of the element last changed. This property is inherited from CIM_EnabledLogicalElement, and it is always set to "NULL".
TotalMountTime
Data type: uint64
Access type: Read-only
For a device that supports removable media, the total time (in seconds) that media have been mounted for data transfer or to clean the device. For devices accessing nonremovable media, such as hard disks, this property is not applicable and should be set to 0. This property is inherited from CIM_MediaAccessDevice, and it is set to 0.
TotalPowerOnHours
Data type: uint64
Access type: Read-only
This property is inherited from CIM_LogicalDevice, but it is not used.
TransitioningToState
Data type: uint16
Access type: Read-only
Indicates the target state to which the instance is transitioning. This property is inherited from CIM_EnabledLogicalElement.
UncompressedDataRate
Data type: uint32
Access type: Read-only
The sustained data transfer rate in KB/sec that the device can read from and write to a media. This is a sustained, raw data rate. Maximum rates or rates assuming compression should not be reported in this property. This property is inherited from CIM_MediaAccessDevice, and it is set to Null.
UnitsDescription
Data type: string
Access type: Read-only
The units relative to its use in MaxUnitsBeforeCleaning. This property is inherited from CIM_MediaAccessDevice, and it is set to Null.
UnitsUsed
Data type: uint64
Access type: Read-only
The current number of units used. This property is inherited from CIM_MediaAccessDevice, and it is set to 0.
UnloadTime
Data type: uint64
Access type: Read-only
The time, in milliseconds, from being able to read or write a media to its unload. This property is inherited from CIM_MediaAccessDevice, and it is set to 0.
Remarks
Access to the Msvm_DiskDrive class might be restricted by UAC Filtering. For more information, see User Account Control and WMI.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 [desktop apps only] |
| Minimum supported server | Windows Server 2012 [desktop apps only] |
| Namespace | Root\Virtualization\V2 |
| MOF | WindowsVirtualization.V2.mof |
| DLL | Vmms.exe |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
