Represents an IDE controller. This class can support up to four drives attached to the controller. The IDE controller is fixed in the virtual machine and therefore does not have a resource pool associated with it.
Note:
This class is not available to generation 2 virtual machines.
The following syntax is simplified Managed Object Format (MOF) code, and it includes all of the inherited properties.
Syntax
[Dynamic, Provider("VmmsWmiInstanceAndMethodProvider"), AMENDMENT]
class Msvm_IDEController : CIM_IDEController
{
string InstanceID;
string Caption;
string Description = "Microsoft Virtual IDE Controller";
string ElementName;
datetime InstallDate;
string Name;
uint16 OperationalStatus[] = { 2 };
string StatusDescriptions[] = { "OK" };
string Status;
uint16 HealthState = 5;
uint16 CommunicationStatus;
uint16 DetailedStatus;
uint16 OperatingStatus;
uint16 PrimaryStatus;
uint16 EnabledState = 5;
string OtherEnabledState;
uint16 RequestedState = 12;
uint16 EnabledDefault = 2;
datetime TimeOfLastStateChange;
uint16 AvailableRequestedStates[];
uint16 TransitioningToState;
string SystemCreationClassName = "Msvm_ComputerSystem";
string SystemName;
string CreationClassName = "Msvm_IDEController";
string DeviceID;
boolean PowerManagementSupported;
uint16 PowerManagementCapabilities[];
uint16 Availability = 6;
uint16 StatusInfo;
uint32 LastErrorCode;
string ErrorDescription;
boolean ErrorCleared;
string OtherIdentifyingInfo[];
uint64 PowerOnHours;
uint64 TotalPowerOnHours;
string IdentifyingDescriptions[];
uint16 AdditionalAvailability[] = {6};
uint64 MaxQuiesceTime;
datetime TimeOfLastReset;
uint16 ProtocolSupported = 37;
uint32 MaxNumberControlled = 2;
string ProtocolDescription = "IDE";
};
Members
The Msvm_IDEController class has these types of members:
Methods
The Msvm_IDEController class has these methods.
| Method | Description |
|---|---|
| EnableDevice | This method is not supported. |
| OnlineDevice | This method is not supported. |
| QuiesceDevice | This method is not supported. |
| RequestStateChange | Requests a state change. |
| Reset | Resets the virtual device. |
| RestoreProperties | This method is not supported. |
| SaveProperties | This method is not supported. |
| SetPowerState | This method is not supported. |
Properties
The Msvm_IDEController class has these properties.
AdditionalAvailability
Data type: uint16 array
Access type: Read-only
Any additional availability and status of the device. This property is inherited from CIM_LogicalDevice.
Availability
Data type: uint16
Access type: Read-only
The primary availability and status of the device. This property is inherited from CIM_LogicalDevice.
AvailableRequestedStates
Data type: uint16 array
Access type: Read-only
Indicates the possible values for the RequestedState parameter of the RequestStateChange method used to initiate a state change. The values listed will be a subset of the values contained in the RequestedStatesSupported property of the associated instance of CIM_EnabledLogicalElementCapabilities, where the values selected are a function of the current state of the CIM_EnabledLogicalElement object. This property can be non-Null if an implementation is able to advertise the set of possible values as a function of the current state. This property will be Null if an implementation is unable to determine the set of possible values as a function of the current state.
This property is inherited from CIM_EnabledLogicalElement.
Caption
Data type: string
Access type: Read-only
A short description of the object. This property is inherited from CIM_ManagedElement.
| Value | Meaning |
|---|---|
| "IDE Controller 0" | The instance represents the primary controller. |
| "IDE Controller 1" | The instance represents the secondary controller. |
CommunicationStatus
Data type: uint16
Access type: Read-only
Indicates the ability of the instrumentation to communicate with the underlying managed element. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
CreationClassName
Data type: string
Access type: Read-only
The name of the class or subclass used in the creation of an instance. This property is inherited from CIM_LogicalDevice.
Description
Data type: string
Access type: Read-only
A description of the object. This property is inherited from CIM_ManagedElement.
DetailedStatus
Data type: uint16
Access type: Read-only
Complements the PrimaryStatus property with additional status detail. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
DeviceID
Data type: string
Access type: Read-only
This property is inherited from CIM_LogicalDevice, and it is set to "Microsoft:GUID\device-specific-data".
ElementName
Data type: string
Access type: Read-only
A display name for the object. This property is inherited from CIM_ManagedElement.
| Value | Meaning |
|---|---|
| "IDE Controller 0" | The instance represents the primary controller. |
| "IDE Controller 1" | The instance represents the secondary controller. |
EnabledDefault
Data type: uint16
Access type: Read-only
An administrator's default or startup configuration for the enabled state of an element. This property is inherited from CIM_EnabledLogicalElement.
EnabledState
Data type: uint16
Access type: Read-only
The enabled and disabled states of an element. It can also indicate the transitions between these requested states. This property is inherited from CIM_EnabledLogicalElement.
ErrorCleared
Data type: boolean
Access type: Read-only
Indicates whether the error reported in LastErrorCode is now cleared. This property is inherited from CIM_LogicalDevice, but it is not used.
ErrorDescription
Data type: string
Access type: Read-only
A string that provides more information about the error recorded in LastErrorCode and information about any corrective actions that can be taken. This property is inherited from CIM_LogicalDevice, but it is not used.
HealthState
Data type: uint16
Access type: Read-only
The current health of the element. This attribute expresses the health of this element but not necessarily that of its subcomponents. The possible values are 0 to 30, where 5 means the element is entirely healthy and 30 means the element is completely nonfunctional. This property is inherited from CIM_ManagedSystemElement.
IdentifyingDescriptions
Data type: string array
Access type: Read-only
An array of free-form strings that provide explanations and details behind the entries in the OtherIdentifyingInfo property array. This property is inherited from CIM_LogicalDevice, but it is not used.
InstallDate
Data type: datetime
Access type: Read-only
The date and time the virtual machine configuration was created. This property is inherited from CIM_ManagedSystemElement.
InstanceID
Data type: string
Access type: Read-only
Qualifiers: Key
Uniquely identifies an instance of this class. This property is inherited from CIM_ManagedElement.
LastErrorCode
Data type: uint32
Access type: Read-only
The last error code reported by the logical device. This property is inherited from CIM_LogicalDevice, but it is not used.
MaxNumberControlled
Data type: uint32
Access type: Read-only
The maximum number of directly addressable entities that are supported by this controller. A value of 0 should be used if the number is unknown or unlimited. The protocol used by the controller to access controlled devices. This property is inherited from CIM_Controller.
MaxQuiesceTime
Data type: uint64
Access type: Read-only
This property has been deprecated. This property is inherited from CIM_LogicalDevice, but it is not used.
Name
Data type: string
Access type: Read-only
The label by which the object is known. This property is inherited from CIM_ManagedSystemElement, and it is the same as the ElementName property.
OperatingStatus
Data type: uint16
Access type: Read-only
Provides current status information for the operational condition of the element and can be used for providing more detail with respect to the value of the EnabledState property. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
OperationalStatus
Data type: uint16 array
Access type: Read-only
The current statuses of the object. This property is inherited from CIM_ManagedSystemElement.
OtherEnabledState
Data type: string
Access type: Read-only
The enabled or disabled state of the element when the EnabledState property is set to 1 (Other). This property must be set to Null when EnabledState is any value other than 1. This property is inherited from CIM_EnabledLogicalElement.
OtherIdentifyingInfo
Data type: string array
Access type: Read-only
Any additional data, beyond device ID information, that could be used to identify a logical device. This property is inherited from CIM_LogicalDevice, and it is set to Null.
PowerManagementCapabilities
Data type: uint16 array
Access type: Read-only
The power management capabilities of the device. This property is inherited from CIM_LogicalDevice, but it is not used.
PowerManagementSupported
Data type: boolean
Access type: Read-only
Indicates whether the device can be power managed. This property is inherited from CIM_LogicalDevice, but it is not used.
PowerOnHours
Data type: uint64
Access type: Read-only
The number of consecutive hours that this device has been powered on since its last power cycle. This property is inherited from CIM_LogicalDevice, but it is not used.
PrimaryStatus
Data type: uint16
Access type: Read-only
Provides high level status information. This property should be used in conjunction with the DetailedStatus property to provide high level and detailed health status information for the element and its subcomponents. A Null value indicates that this property is not implemented. This property is inherited from CIM_ManagedSystemElement.
ProtocolDescription
Data type: string
Access type: Read-only
A string that provides more information that is related to the protocol supported by the controller. This property is inherited from CIM_Controller.
ProtocolSupported
Data type: uint16
Access type: Read-only
The protocol used by the controller to access controlled devices. This property is inherited from CIM_Controller.
| Value | Meaning |
|---|---|
| 37 | IDE |
RequestedState
Data type: uint16
Access type: Read-only
The last requested or desired state for the element. The actual state of the element is represented by EnabledState. This property is provided to compare the last requested and current enabled or disabled states. A particular instance of an enabled logical element might not support RequestedStateChange. If this occurs, the value 12 (Not Applicable) is used. This property is inherited from CIM_EnabledLogicalElement.
Status
Data type: string
Access type: Read-only
The current status of the object. This property is inherited from CIM_ManagedSystemElement, but it is not used.
StatusDescriptions
Data type: string array
Access type: Read-only
Strings that describe the various OperationalStatus array values. This property is inherited from CIM_ManagedSystemElement.
StatusInfo
Data type: uint16
Access type: Read-only
The current state of the logical device. This property is inherited from CIM_LogicalDevice, but it is not used.
SystemCreationClassName
Data type: string
Access type: Read-only
The scoping system's creation class name. This property is inherited from CIM_LogicalDevice.
SystemName
Data type: string
Access type: Read-only
The unique identifier for the scoping virtual machine. This property is inherited from CIM_LogicalDevice.
TimeOfLastReset
Data type: datetime
Access type: Read-only
The last time the virtual machine was powered on. This property is inherited from CIM_Controller.
TimeOfLastStateChange
Data type: datetime
Access type: Read-only
The date or time when the enabled state of the element last changed. This property is inherited from CIM_EnabledLogicalElement.
TotalPowerOnHours
Data type: uint64
Access type: Read-only
The total number of hours that this device has been powered. This property is inherited from CIM_LogicalDevice, but it is not used.
TransitioningToState
Data type: uint16
Access type: Read-only
Indicates the target state to which the instance is transitioning. This property is inherited from CIM_EnabledLogicalElement, but it is not used.
Remarks
Access to the Msvm_IDEController class might be restricted by UAC Filtering. For more information, see User Account Control and WMI.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 8 [desktop apps only] |
| Minimum supported server | Windows Server 2012 [desktop apps only] |
| Namespace | Root\Virtualization\V2 |
| MOF | WindowsVirtualization.V2.mof |
| DLL | Vmms.exe |
See also
Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.
