大网数据广告活动
网络与域名解析

Routing and Remote Access Error Codes

· 52CE 我爱测

The following Routing and Remote Access (RRAS) API error codes are defined in raserror.h.

The following Routing and Remote Access (RRAS) API error codes are defined in raserror.h. All error codes are supported in Windows 2000 or later versions of Windows unless specified otherwise.

<table> <colgroup> <col /> <col /> </colgroup> <thead> <tr class="header"> <th>Return code/value</th> <th>Description</th> </tr> </thead> <tbody> <tr class="odd"> <td> PENDING 600 </td> <td>An operation is pending.</td> </tr> <tr class="even"> <td> ERROR_INVALID_PORT_HANDLE 601 </td> <td>The port handle supplied is not valid.</td> </tr> <tr class="odd"> <td> ERROR_PORT_ALREADY_OPEN 602 </td> <td>The specified port is already open.</td> </tr> <tr class="even"> <td> ERROR_BUFFER_TOO_SMALL 603 </td> <td>The buffer supplied is too small.</td> </tr> <tr class="odd"> <td> ERROR_WRONG_INFO_SPECIFIED 604 </td> <td>The port information specified is incorrect.</td> </tr> <tr class="even"> <td> ERROR_CANNOT_SET_PORT_INFO 605 </td> <td>The port information specified cannot be set.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_PORT_NOT_CONNECTED 606 </td> <td>The port specified is not connected.</td> </tr> <tr class="even"> <td> ERROR_EVENT_INVALID 607 </td> <td>An event that is not valid was detected.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_DEVICE_DOES_NOT_EXIST 608 </td> <td>The specified device does not exist.</td> </tr> <tr class="even"> <td> ERROR_DEVICETYPE_DOES_NOT_EXIST 609 </td> <td>The specified device type does not exist.</td> </tr> <tr class="odd"> <td> ERROR_BUFFER_INVALID 610 </td> <td>The buffer supplied is not valid.</td> </tr> <tr class="even"> <td> ERROR_ROUTE_NOT_AVAILABLE 611 </td> <td>A route was specified that is not available.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_ROUTE_NOT_ALLOCATED 612 </td> <td>The specified route is not allocated.</td> </tr> <tr class="even"> <td> ERRERROR_INVALID_COMPRESSION_SPECIFIED 613 </td> <td>The specified compression is not valid.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_OUT_OF_BUFFERS 614 </td> <td>There were insufficient buffers available.</td> </tr> <tr class="even"> <td> ERROR_PORT_NOT_FOUND 615 </td> <td>The specified port was not found.</td> </tr> <tr class="odd"> <td> ERROR_ASYNC_REQUEST_PENDING 616 </td> <td>An asynchronous request is pending.</td> </tr> <tr class="even"> <td> ERROR_ALREADY_DISCONNECTING 617 </td> <td>The specified port or device is already disconnecting.</td> </tr> <tr class="odd"> <td> ERROR_PORT_NOT_OPEN 618 </td> <td>The specified port is not open.</td> </tr> <tr class="even"> <td> ERROR_PORT_DISCONNECTED 619 </td> <td>The specified port is disconnected.</td> </tr> <tr class="odd"> <td> ERROR_NO_ENDPOINTS 620 </td> <td>No endpoints could be determined.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_CANNOT_OPEN_PHONEBOOK 621 </td> <td>Cannot open the specified phone book file.</td> </tr> <tr class="odd"> <td> ERROR_CANNOT_LOAD_PHONEBOOK 622 </td> <td>Cannot load the specified phone book file.</td> </tr> <tr class="even"> <td> ERROR_CANNOT_FIND_PHONEBOOK_ENTRY 623 </td> <td>Cannot find the specified phone book entry.</td> </tr> <tr class="odd"> <td> ERROR_CANNOT_WRITE_PHONEBOOK 624 </td> <td>Cannot write to the specified phone book file.</td> </tr> <tr class="even"> <td> ERROR_CORRUPT_PHONEBOOK 625 </td> <td>Information found in the specified phone book is not valid.</td> </tr> <tr class="odd"> <td> ERROR_CANNOT_LOAD_STRING 626 </td> <td>A string could not be loaded.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_KEY_NOT_FOUND 627 </td> <td>Cannot find the specified key.</td> </tr> <tr class="odd"> <td> ERROR_DISCONNECTION 628 </td> <td>The specified port was disconnected.</td> </tr> <tr class="even"> <td> ERROR_REMOTE_DISCONNECTION 629 </td> <td>The specified port was disconnected by the remote computer.</td> </tr> <tr class="odd"> <td> ERROR_HARDWARE_FAILURE 630 </td> <td>The specified port was disconnected due to hardware failure.</td> </tr> <tr class="even"> <td> ERROR_USER_DISCONNECTION 631 </td> <td>The specified port was disconnected by the user.</td> </tr> <tr class="odd"> <td> ERROR_INVALID_SIZE 632 </td> <td>Incorrect structure size.</td> </tr> <tr class="even"> <td> ERROR_PORT_NOT_AVAILABLE 633 </td> <td>The specified port is already in use or is not configured for remote access dial-out.</td> </tr> <tr class="odd"> <td> ERROR_CANNOT_PROJECT_CLIENT 634 </td> <td>Your computer could not be registered on the remote network.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_UNKNOWN 635 </td> <td>An unknown error has occurred.</td> </tr> <tr class="odd"> <td> ERROR_WRONG_DEVICE_ATTACHED 636 </td> <td>The wrong device is attached to the specified port.</td> </tr> <tr class="even"> <td> ERROR_BAD_STRING 637 </td> <td>A string was detected that could not be converted.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_REQUEST_TIMEOUT 638 </td> <td>The request has timed out.</td> </tr> <tr class="even"> <td> ERROR_CANNOT_GET_LANA 639 </td> <td>No asynchronous net is available.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NETBIOS_ERROR 640 </td> <td>An error has occurred involving NetBIOS.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_SERVER_OUT_OF_RESOURCES 641 </td> <td>he server cannot allocate NetBIOS resources needed to support the client.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NAME_EXISTS_ON_NET 642 </td> <td>One of your computer's NetBIOS names is already registered on the remote network.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_SERVER_GENERAL_NET_FAILURE 643 </td> <td>A network adapter at the server failed.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> WARNING_MSG_ALIAS_NOT_ADDED 644 </td> <td>You will not receive network message popups.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_AUTH_INTERNAL 645 </td> <td>An internal authentication error has occurred.</td> </tr> <tr class="odd"> <td> ERROR_RESTRICTED_LOGON_HOURS 646 </td> <td>The specified account is not permitted to log in at this time of day.</td> </tr> <tr class="even"> <td> ERROR_ACCT_DISABLED 647 </td> <td>The specified account is disabled.</td> </tr> <tr class="odd"> <td> ERROR_PASSWD_EXPIRED 648 </td> <td>The specified password has expired.</td> </tr> <tr class="even"> <td> ERROR_NO_DIALIN_PERMISSION 649 </td> <td>The specified account does not have remote access permissions.</td> </tr> <tr class="odd"> <td> ERROR_SERVER_NOT_RESPONDING 650 </td> <td>The remote access server is not responding.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_FROM_DEVICE 651 </td> <td>Your modem or other connection device has reported an error.</td> </tr> <tr class="odd"> <td> ERROR_UNRECOGNIZED_RESPONSE 652 </td> <td>An unrecognized response was returned by the device.</td> </tr> <tr class="even"> <td> ERROR_MACRO_NOT_FOUND 653 </td> <td>A macro required by the device was not found in the device .INF file section.</td> </tr> <tr class="odd"> <td> ERROR_MACRO_NOT_DEFINED 654 </td> <td>A command or response in the device .INF file section refers to an undefined macro.</td> </tr> <tr class="even"> <td> ERROR_MESSAGE_MACRO_NOT_FOUND 655 </td> <td>The <message> macro was not found in the device .INF file section.</td> </tr> <tr class="odd"> <td> ERROR_DEFAULTOFF_MACRO_NOT_FOUND 656 </td> <td>The &lt;defaultoff> macro in the device .INF file section contains an undefined macro.</td> </tr> <tr class="even"> <td> ERROR_FILE_COULD_NOT_BE_OPENED 657 </td> <td>The device .INF file could not be opened.</td> </tr> <tr class="odd"> <td> ERROR_DEVICENAME_TOO_LONG 658 </td> <td>The device name in the device .INF or media .INI file is too long. </td> </tr> <tr class="even"> <td> ERROR_DEVICENAME_NOT_FOUND 659 </td> <td>The media .INI file refers to an unknown device name.</td> </tr> <tr class="odd"> <td> ERROR_NO_RESPONSES 660 </td> <td>The device .INF file contains no responses for the command.</td> </tr> <tr class="even"> <td> ERROR_NO_COMMAND_FOUND 661 </td> <td>The device .INF file is missing a command.</td> </tr> <tr class="odd"> <td> ERROR_WRONG_KEY_SPECIFIED 662 </td> <td>Attempted to set a macro not listed in device .INF file section.</td> </tr> <tr class="even"> <td> ERROR_UNKNOWN_DEVICE_TYPE 663 </td> <td>The media .INI file refers to an unknown device type.</td> </tr> <tr class="odd"> <td> ERROR_ALLOCATING_MEMORY 664 </td> <td>Cannot allocate memory.</td> </tr> <tr class="even"> <td> ERROR_PORT_NOT_CONFIGURED 665 </td> <td>The port is not configured for remote access.</td> </tr> <tr class="odd"> <td> ERROR_DEVICE_NOT_READY 666 </td> <td>Your modem or other connection device is not functioning.</td> </tr> <tr class="even"> <td> ERROR_READING_INI_FILE 667 </td> <td>Cannot read the media .INI file.</td> </tr> <tr class="odd"> <td> ERROR_NO_CONNECTION 668 </td> <td>The connection was dropped.</td> </tr> <tr class="even"> <td> ERROR_BAD_USAGE_IN_INI_FILE 669 </td> <td>The usage parameter in the media .ini file is not valid.</td> </tr> <tr class="odd"> <td> ERROR_READING_SECTIONNAME 670 </td> <td>Cannot read the section name from the media .INI file.</td> </tr> <tr class="even"> <td> ERROR_READING_DEVICETYPE 671 </td> <td>Cannot read the device type from the media .INI file.</td> </tr> <tr class="odd"> <td> ERROR_READING_DEVICENAME 672 </td> <td>Cannot read the device name from the media .INI file.</td> </tr> <tr class="even"> <td> ERROR_READING_USAGE 673 </td> <td>Cannot read the usage from the media .INI file.</td> </tr> <tr class="odd"> <td> ERROR_READING_MAXCONNECTBPS 674 </td> <td>The system was unable to read the maximum carrier connection speed from the media .INI file.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_READING_MAXCARRIERBPS 675 </td> <td>Cannot read the usage from the media .INI file.</td> </tr> <tr class="odd"> <td> ERROR_LINE_BUSY 676 </td> <td>The line is busy.</td> </tr> <tr class="even"> <td> ERROR_VOICE_ANSWER 677 </td> <td>A person answered instead of a modem.</td> </tr> <tr class="odd"> <td> ERROR_NO_ANSWER 678 </td> <td>There is no answer.</td> </tr> <tr class="even"> <td> ERROR_NO_CARRIER 679 </td> <td>Cannot detect a carrier signal.</td> </tr> <tr class="odd"> <td> ERROR_NO_DIALTONE 680 </td> <td>There is no dial tone.</td> </tr> <tr class="even"> <td> ERROR_IN_COMMAND 681 </td> <td>The modem (or other connecting device) reported a general error.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_WRITING_SECTIONNAME 682 </td> <td>There was an error in writing the section name.</td> </tr> <tr class="even"> <td> ERROR_WRITING_DEVICETYPE 683 </td> <td>There was an error in writing the device type.</td> </tr> <tr class="odd"> <td> ERROR_WRITING_DEVICENAME 684 </td> <td>There was an error in writing the device name.</td> </tr> <tr class="even"> <td> ERROR_WRITING_MAXCONNECTBPS 685 </td> <td>There was an error in writing the maximum connection speed.</td> </tr> <tr class="odd"> <td> ERROR_WRITING_MAXCARRIERBPS 686 </td> <td>There was an error in writing the maximum carrier speed.</td> </tr> <tr class="even"> <td> ERROR_WRITING_USAGE 687 </td> <td>There was an error in writing the usage.</td> </tr> <tr class="odd"> <td> ERROR_WRITING_DEFAULTOFF 688 </td> <td>There was an error in writing the default-off.</td> </tr> <tr class="even"> <td> ERROR_READING_DEFAULTOFF 689 </td>

</tr> <tr class="odd"> <td> ERROR_EMPTY_INI_FILE 690 </td> <td>The media .INI file is empty.</td> </tr> <tr class="even"> <td> ERROR_AUTHENTICATION_FAILURE 691 </td> <td>Access denied because the user name, password, or both is not valid on the domain.</td> </tr> <tr class="odd"> <td> ERROR_PORT_OR_DEVICE 692 </td> <td>A hardware failure has occurred in the port or attached device</td> </tr> <tr class="even"> <td> ERROR_NOT_BINARY_MACRO 693 </td> <td>The macro is not a binary macro.</td> </tr> <tr class="odd"> <td> ERROR_DCB_NOT_FOUND 694 </td> <td>DCB not found.</td> </tr> <tr class="even"> <td> ERROR_STATE_MACHINES_NOT_STARTED 695 </td> <td>State machines are not started.</td> </tr> <tr class="odd"> <td> ERROR_STATE_MACHINES_ALREADY_STARTED 696 </td> <td>State machines are already started.</td> </tr> <tr class="even"> <td> ERROR_PARTIAL_RESPONSE_LOOPING 697 </td> <td>Partial response looping.</td> </tr> <tr class="odd"> <td> ERROR_UNKNOWN_RESPONSE_KEY 698 </td> <td>A response key name in the device .INF file is not in the expected format.</td> </tr> <tr class="even"> <td> ERROR_RECV_BUF_FULL 699 </td> <td>The device response caused a buffer overflow.</td> </tr> <tr class="odd"> <td> ERROR_CMD_TOO_LONG 700 </td> <td>The expanded command in the device .INF file is too long.</td> </tr> <tr class="even"> <td> ERROR_UNSUPPORTED_BPS 701 </td> <td>The device moved to a connection speed that is not supported by the COM driver.</td> </tr> <tr class="odd"> <td> ERROR_UNEXPECTED_RESPONSE 702 </td> <td>Device response received when none expected.</td> </tr> <tr class="even"> <td> ERROR_INTERACTIVE_MODE 703 </td> <td>An error occurred because the interactive mode is enabled.</td> </tr> <tr class="odd"> <td> ERROR_BAD_CALLBACK_NUMBER 704 </td> <td>A bad callback number was specified.</td> </tr> <tr class="even"> <td> ERROR_INVALID_AUTH_STATE 705 </td> <td>The specified authentication state is not valid.</td> </tr> <tr class="odd"> <td> ERROR_WRITING_INITBPS 706 </td> <td>An error occurred when writing the initial connection speed.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_X25_DIAGNOSTIC 707 </td> <td>An X.25 diagnostic indication was received.</td> </tr> <tr class="odd"> <td> ERROR_ACCT_EXPIRED 708 </td> <td>The specified account has expired.</td> </tr> <tr class="even"> <td> ERROR_CHANGING_PASSWORD 709 </td> <td>An error occurred while attempting to change the password on the domain.</td> </tr> <tr class="odd"> <td> ERROR_OVERRUN 710 </td> <td>Serial overrun errors were detected while communicating with your modem.</td> </tr> <tr class="even"> <td> ERROR_RASMAN_CANNOT_INITIALIZE 711 </td> <td>RasMan initialization failure. Check the event log.</td> </tr> <tr class="odd"> <td> ERROR_BIPLEX_PORT_NOT_AVAILABLE 712 </td> <td>The two-way port is initializing. Wait a few seconds and redial.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_NO_ACTIVE_ISDN_LINES 713 </td> <td>No active ISDN lines are available.</td> </tr> <tr class="odd"> <td> ERROR_NO_ISDN_CHANNELS_AVAILABLE 714 </td> <td>No ISDN channels are available to make the call.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_TOO_MANY_LINE_ERRORS 715 </td> <td>Too many errors occurred because of poor phone line quality.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_IP_CONFIGURATION 716 </td> <td>The remote access IP configuration is unusable.</td> </tr> <tr class="even"> <td> ERROR_NO_IP_ADDRESSES 717 </td> <td>No IP addresses are available in the static pool of remote access IP addresses.</td> </tr> <tr class="odd"> <td> ERROR_PPP_TIMEOUT 718 </td> <td>A PPP timeout occurred.</td> </tr> <tr class="even"> <td> ERROR_PPP_REMOTE_TERMINATED 719 </td> <td>The connection was terminated by the remote computer.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_PPP_NO_PROTOCOLS_CONFIGURED 720 </td> <td>No PPP control protocols are configured.</td> </tr> <tr class="even"> <td> ERROR_PPP_NO_RESPONSE 721 </td> <td>The remote PPP peer is not responding.</td> </tr> <tr class="odd"> <td> ERROR_PPP_INVALID_PACKET 722 </td> <td>The PPP packet is not valid.</td> </tr> <tr class="even"> <td> ERROR_PHONE_NUMBER_TOO_LONG 723 </td> <td>The phone number, including the prefix and suffix, is too long.</td> </tr> <tr class="odd"> <td> ERROR_IPXCP_NO_DIALOUT_CONFIGURED 724 </td> <td>The IPX protocol cannot dial out on the modem (or other connecting device) because this computer is not configured for dialing out (it is an IPX router).

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_IPXCP_NO_DIALIN_CONFIGURED 725 </td> <td>The IPX protocol cannot dial in on the modem (or other connecting device) because this computer is not configured for dialing in (the IPX router is not installed).

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_IPXCP_DIALOUT_ALREADY_ACTIVE 726 </td> <td>The IPX protocol cannot be used for dial-out on more than one port at a time.</td> </tr> <tr class="even"> <td> ERROR_ACCESSING_TCPCFGDLL 727 </td> <td>Cannot access TCPCFG.DLL.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NO_IP_RAS_ADAPTER 728 </td> <td>Cannot find an IP adapter bound to remote access.</td> </tr> <tr class="even"> <td> ERROR_SLIP_REQUIRES_IP 729 </td> <td>SLIP cannot be used unless the IP protocol is installed.</td> </tr> <tr class="odd"> <td> ERROR_PROJECTION_NOT_COMPLETE 730 </td> <td>Computer registration is not complete.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_PROTOCOL_NOT_CONFIGURED 731 </td> <td>The specified protocol is not configured.</td> </tr> <tr class="odd"> <td> ERROR_PPP_NOT_CONVERGING 732 </td> <td>The PPP negotiation is not converging.</td> </tr> <tr class="even"> <td> ERROR_PPP_CP_REJECTED 733 </td> <td>the PPP control protocol for the specified network protocol is not available on the server.</td> </tr> <tr class="odd"> <td> ERROR_PPP_LCP_TERMINATED 734 </td> <td>The PPP link control protocol was terminated.</td> </tr> <tr class="even"> <td> ERROR_PPP_REQUIRED_ADDRESS_REJECTED 735 </td> <td>The requested address was rejected by the server.</td> </tr> <tr class="odd"> <td> ERROR_PPP_NCP_TERMINATED 736 </td> <td>The remote computer terminated the control protocol.</td> </tr> <tr class="even"> <td> ERROR_PPP_LOOPBACK_DETECTED 737 </td> <td>Loopback detected.</td> </tr> <tr class="odd"> <td> ERROR_PPP_NO_ADDRESS_ASSIGNED 738 </td> <td>The server did not assign an address.</td> </tr> <tr class="even"> <td> ERROR_CANNOT_USE_LOGON_CREDENTIALS 739 </td> <td>The remote server cannot use the Windows NT encrypted password.</td> </tr> <tr class="odd"> <td> ERROR_TAPI_CONFIGURATION 740 </td> <td>The TAPI devices configured for remote access failed to initialize or were not installed correctly.</td> </tr> <tr class="even"> <td> ERROR_NO_LOCAL_ENCRYPTION 741 </td> <td>The local computer does not support encryption.</td> </tr> <tr class="odd"> <td> ERROR_NO_REMOTE_ENCRYPTION 742 </td> <td>The remote server does not support encryption.</td> </tr> <tr class="even"> <td> ERROR_REMOTE_REQUIRES_ENCRYPTION 743 </td> <td>The remote computer requires data encryption.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_IPXCP_NET_NUMBER_CONFLICT 744 </td> <td>The system cannot use the IPX network number assigned by the remote computer. Additional information is provided in the event log.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_SMM 745 </td> <td>The Session Management Module (SMM) is not valid.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SMM_UNINITIALIZED 746 </td> <td>The SMM is uninitialized.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_NO_MAC_FOR_PORT 747 </td> <td>No MAC for port.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SMM_TIMEOUT 748 </td> <td>The SMM timed out.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_BAD_PHONE_NUMBER 749 </td> <td>A bad phone number was specified.</td> </tr> <tr class="odd"> <td> ERROR_WRONG_MODULE 750 </td> <td>The wrong SMM was specified.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_CALLBACK_NUMBER 751 </td> <td>The callback number contains a character that is not valid. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SCRIPT_SYNTAX 752 </td> <td>A syntax error was encountered while processing a script.</td> </tr> <tr class="even"> <td> ERROR_HANGUP_FAILED 753 </td> <td>The connection could not be disconnected because it was created by the multi-protocol router.</td> </tr> <tr class="odd"> <td> ERROR_BUNDLE_NOT_FOUND 754 </td> <td>The system could not find the multi-link bundle.</td> </tr> <tr class="even"> <td> ERROR_CANNOT_DO_CUSTOMDIAL 755 </td> <td>The system cannot perform automated dial because this connection has a custom dialer specified.</td> </tr> <tr class="odd"> <td> ERROR_DIAL_ALREADY_IN_PROGRESS 756 </td> <td>This connection is already being dialed.</td> </tr> <tr class="even"> <td> ERROR_RASAUTO_CANNOT_INITIALIZE 757 </td> <td>RAS could not be started automatically. Additional information is provided in the event log.</td> </tr> <tr class="odd"> <td> ERROR_CONNECTION_ALREADY_SHARED 758 </td> <td>Internet Connection Sharing (ICS) is already enabled on the connection.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_SHARING_CHANGE_FAILED 759 </td> <td>An error occurred while the existing Internet Connection Sharing settings were being changed.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SHARING_ROUTER_INSTALL 760 </td> <td>An error occurred while routing capabilities were being enabled.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_SHARE_CONNECTION_FAILED 761 </td> <td>An error occurred while Internet Connection Sharing was being enabled for the connection.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> 7ERROR_SHARING_PRIVATE_INSTALL64 762 </td> <td>An error occurred while the local network was being configured for sharing.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_CANNOT_SHARE_CONNECTION 763 </td> <td>Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NO_SMART_CARD_READER 764 </td> <td>No smart card reader is installed.</td> </tr> <tr class="even"> <td> ERROR_SHARING_ADDRESS_EXISTS 765 </td> <td>Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing. </td> </tr> <tr class="odd"> <td> ERROR_NO_CERTIFICATE 766 </td> <td>A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate. </td> </tr> <tr class="even"> <td> ERROR_SHARING_MULTIPLE_ADDRESSES 767 </td> <td>Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing. </td> </tr> <tr class="odd"> <td> ERROR_FAILED_TO_ENCRYPT 768 </td> <td>The connection attempt failed because of failure to encrypt data. </td> </tr> <tr class="even"> <td> ERROR_BAD_ADDRESS_SPECIFIED 769 </td> <td>The specified destination is not reachable. </td> </tr> <tr class="odd"> <td> ERROR_CONNECTION_REJECT 770 </td> <td>The remote computer rejected the connection attempt. </td> </tr> <tr class="even"> <td> ERROR_CONGESTION 771 </td> <td>The connection attempt failed because the network is busy. </td> </tr> <tr class="odd"> <td> ERROR_INCOMPATIBLE 772 </td> <td>The remote computer's network hardware is incompatible with the type of call requested. </td> </tr> <tr class="even"> <td> ERROR_NUMBERCHANGED 773 </td> <td>The connection attempt failed because the destination number has changed. </td> </tr> <tr class="odd"> <td> ERROR_TEMPFAILURE 774 </td> <td>The connection attempt failed because of a temporary failure. Try connecting again.</td> </tr> <tr class="even"> <td> ERROR_BLOCKED 775 </td> <td>The call was blocked by the remote computer. </td> </tr> <tr class="odd"> <td> ERROR_DONOTDISTURB 776 </td> <td>The call could not be connected because the remote computer has invoked the Do Not Disturb feature. </td> </tr> <tr class="even"> <td> ERROR_OUTOFORDER 777 </td> <td>The connection attempt failed because the modem or other connection device on the remote computer is out of order. </td> </tr> <tr class="odd"> <td> ERROR_UNABLE_TO_AUTHENTICATE_SERVER 778 </td> <td>It was not possible to verify the identity of the server. </td> </tr> <tr class="even"> <td> ERROR_SMART_CARD_REQUIRED 779 </td> <td>To dial out using this connection you must use a smart card.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_INVALID_FUNCTION_FOR_ENTRY 780 </td> <td>An attempted function is not valid for this connection. </td> </tr> <tr class="even"> <td> ERROR_CERT_FOR_ENCRYPTION_NOT_FOUND 781 </td> <td>The encryption attempt failed because no valid certificate was found.

Note: Deprecated in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SHARING_RRAS_CONFLICT 782 </td> <td>Connection Sharing (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing.</td> </tr> <tr class="even"> <td> ERROR_SHARING_NO_PRIVATE_LAN 783 </td> <td>Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing. </td> </tr> <tr class="odd"> <td> ERROR_NO_DIFF_USER_AT_LOGON 784 </td> <td>You cannot dial using this connection at login time because it is configured to use a user name different than the one on the smart card. If you want to use this connection at login time, you must configure it to use the user name on the smart card. </td> </tr> <tr class="even"> <td> ERROR_NO_REG_CERT_AT_LOGON 785 </td> <td>You cannot dial using this connection at login time because it is not configured to use a smart card. If you want to use it at login time, you must edit the properties of this connection so that it uses a smart card. </td> </tr> <tr class="odd"> <td> ERROR_OAKLEY_NO_CERT 786 </td> <td>The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication. </td> </tr> <tr class="even"> <td> ERROR_OAKLEY_AUTH_FAIL 787 </td> <td>The L2TP connection attempt failed because the security layer could not authenticate the remote computer. </td> </tr> <tr class="odd"> <td> ERROR_OAKLEY_ATTRIB_FAIL 788 </td> <td>The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer. </td> </tr> <tr class="even"> <td> ERROR_OAKLEY_GENERAL_PROCESSING 789 </td> <td>The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer. </td> </tr> <tr class="odd"> <td> ERROR_OAKLEY_NO_PEER_CERT 790 </td> <td>The L2TP connection attempt failed because certificate validation on the remote computer failed. </td> </tr> <tr class="even"> <td> ERROR_OAKLEY_NO_POLICY 791 </td> <td>The L2TP connection attempt failed because security policy for the connection was not found. </td> </tr> <tr class="odd"> <td> ERROR_OAKLEY_TIMED_OUT 792 </td> <td>The L2TP connection attempt failed because security negotiation timed out. </td> </tr> <tr class="even"> <td> ERROR_OAKLEY_ERROR 793 </td> <td>The L2TP connection attempt failed because an error occurred while negotiating security. </td> </tr> <tr class="odd"> <td> ERROR_UNKNOWN_FRAMED_PROTOCOL 794 </td> <td>The Framed Protocol RADIUS attribute for this user is not PPP. </td> </tr> <tr class="even"> <td> ERROR_WRONG_TUNNEL_TYPE 795 </td> <td>The Tunnel Type RADIUS attribute for this user is not correct. </td> </tr> <tr class="odd"> <td> ERROR_UNKNOWN_SERVICE_TYPE 796 </td> <td>The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed. </td> </tr> <tr class="even"> <td> ERROR_CONNECTING_DEVICE_NOT_FOUND 797 </td> <td>A connection to the remote computer could not be established because the modem was not found or was busy. </td> </tr> <tr class="odd"> <td> ERROR_NO_EAPTLS_CERTIFICATE 798 </td> <td>A certificate could not be found that can be used with the Extensible Authentication Protocol (EAP). </td> </tr> <tr class="even"> <td> ERROR_SHARING_HOST_ADDRESS_CONFLICT 799 </td> <td>Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Ensure that no other client on the network is configured to use 192.168.0.1.

Note: Supported in Windows XP and later versions of Windows.

Note: Windows 7 and later: The host must be configured to use 192.168.137.1

</td> </tr> <tr class="odd"> <td> ERROR_AUTOMATIC_VPN_FAILED 800 </td> <td>Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_VALIDATING_SERVER_CERT 801 </td> <td>This connection is configured to validate the identity of the access server, but Windows cannot verify the digital certificate sent by the server.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_READING_SCARD 802 </td> <td>The card supplied was not recognized. Please check that the card is inserted correctly, and fits securely.

Note: Supported in Windows XP with SP1 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_PEAP_COOKIE_CONFIG 803 </td> <td>The PEAP configuration stored in the session cookie does not match the current session configuration.

Note: Supported in Windows XP with SP1 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_INVALID_PEAP_COOKIE_USER 804 </td> <td>The PEAP identity stored in the session cookie does not match the current identity.

Note: Supported in Windows XP with SP1 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_MSCHAPV2_CONFIG 805 </td> <td>You cannot dial using this connection at login time because it is configured to use the currently-logged-in user's credentials.

Note: Supported in Windows XP with SP1 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_VPN_GRE_BLOCKED 806 </td> <td>A connection between your computer and the VPN server has been started, but the VPN connection cannot be completed. The most common cause for this is that at least one Internet device (for example, a firewall or a router) between your computer and the VPN server is not configured to allow Generic Routing Encapsulation (GRE) protocol packets.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_VPN_DISCONNECT 807 </td> <td>The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Try to reconnect to the VPN server.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_VPN_REFUSED 808 </td> <td>The network connection between your computer and the VPN server could not be established because the remote server refused the connection. This is typically caused by a mismatch between the server's configuration and your connection settings.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_VPN_TIMEOUT 809 </td> <td>The network connection between your computer and the VPN server could not be established because the remote server is not responding. This could be because one of the network devices (for example, firewalls, NAT, routers) between your computer and the remote server is not configured to allow VPN connections.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_VPN_BAD_CERT 810 </td> <td>A network connection between your computer and the VPN server was started, but the VPN connection was not completed. This is typically caused by the use of an incorrect or expired certificate for authentication between the client and the server.

Note: Supported in Windows Vista and later versions of Windows

</td> </tr> <tr class="even"> <td> ERROR_VPN_BAD_PSK 811 </td> <td>The network connection between your computer and the VPN server could not be established because the remote server is not responding. This is typically caused by a pre-shared key problem between the client and server. A pre-shared key is used to guarantee you are who you say you are in an IP Security (IPSec) communication cycle.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SERVER_POLICY 812 </td> <td>The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_BROADBAND_ACTIVE 813 </td> <td>You have attempted to establish a second broadband connection while a previous broadband connection is already established using the same device or port.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_BROADBAND_NO_NIC 814 </td> <td>The underlying Ethernet connectivity required for the broadband connection was not found.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_BROADBAND_TIMEOUT 815 </td> <td>The broadband network connection could not be established on your computer because the remote server is not responding. This could be caused by a value that is not valid for the 'Service Name' field for this connection.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_FEATURE_DEPRECATED 816 </td> <td>A feature or setting you have tried to enable is no longer supported by the remote access service.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_CANNOT_DELETE 817 </td> <td>Cannot delete a connection while it is connected.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_RASQEC_RESOURCE_CREATION_FAILED 818 </td> <td>The Network Access Protection (NAP) enforcement client could not create system resources for remote access connections. Some network services or resources might not be available.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_RASQEC_NAPAGENT_NOT_ENABLED 819 </td> <td>The Network Access Protection Agent (NAP Agent) service has been disabled or is not installed on this computer. Some network services or resources might not be available.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_RASQEC_NAPAGENT_NOT_CONNECTED 820 </td> <td>The Network Access Protection (NAP) enforcement client failed to register with the Network Access Protection Agent (NAP Agent) service. Some network services or resources might not be available.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_RASQEC_CONN_DOESNOTEXIST 821 </td> <td>The Network Access Protection (NAP) enforcement client was unable to process the request because the remote access connection does not exist.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_RASQEC_TIMEOUT 822 </td> <td>The Network Access Protection (NAP) enforcement client did not respond. Some network services or resources might not be available.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_PEAP_CRYPTOBINDING_INVALID 823 </td> <td>The Crypto-Binding type-length-value (TLV) received is not valid.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_PEAP_CRYPTOBINDING_NOTRECEIVED 824 </td> <td>Crypto-Binding TLV was not received.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_VPNSTRATEGY 825 </td> <td>Point-to-Point Tunneling Protocol (PPTP) is incompatible with IPv6. Change the type of virtual private network to Layer Two Tunneling Protocol (L2TP).

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_EAPTLS_CACHE_CREDENTIALS_INVALID 826 </td> <td>EAPTLS validation of the cached credentials failed. Discard cached credentials.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_IPSEC_SERVICE_STOPPED 827 </td> <td>The L2TP/IPsec connection cannot be completed because the IKE and AuthIP IPSec Keying Modules service and/or the Base Filtering Engine service is not running. These services are required to establish an L2TP/IPSec connection.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_IDLE_TIMEOUT 828 </td> <td>The connection was terminated because of idle timeout.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_LINK_FAILURE 829 </td> <td>The modem (or other connecting device) was disconnected due to link failure.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_USER_LOGOFF 830 </td> <td>The connection was terminated because user logged off.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_FAST_USER_SWITCH 831 </td> <td>The connection was terminated because user switch happened.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_HIBERNATION 832 </td> <td>The connection was terminated because of hibernation.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_SYSTEM_SUSPENDED 833 </td> <td>The connection was terminated because the system got suspended.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_RASMAN_SERVICE_STOPPED 834 </td> <td>The connection was terminated because Remote Access Connection manager stopped.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_SERVER_CERT 835 </td> <td>The L2TP connection attempt failed because the security layer could not authenticate the remote computer. This could be because one or more fields of the certificate presented by the remote server could not be validated as belonging to the target destination.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NOT_NAP_CAPABLE 836 </td> <td>The machine is not NAP capable.

Note: Supported in Windows Vista and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_TUNNELID 837 </td> <td>Invalid Tunnel ID.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_UPDATECONNECTION_REQUEST_IN_PROCESS 838 </td> <td>Another update connection request is in progress. RAS allows only one update connection request at a time.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_PROTOCOL_ENGINE_DISABLED 839 </td> <td>Negotiating using configured protocol is disable. Edit connection properties and select different protocol for negotiation and try again.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_INTERNAL_ADDRESS_FAILURE 840 </td> <td>Internal address negotiation failed.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_FAILED_CP_REQUIRED 841 </td> <td>Client has to request an Internal IPv4 or IPv6 address.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_TS_UNACCEPTABLE 842 </td> <td>Traffic Selectors negotiation failed.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_MOBIKE_DISABLED 843 </td> <td>Mobility is disabled for this connection.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_CANNOT_INITIATE_MOBIKE_UPDATE 844 </td> <td>The VPN Connection is still connecting or re-authenticating because of Quarantine state change. Initiate mobile update only when connection state is 'Connected'.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_PEAP_SERVER_REJECTED_CLIENT_TLV 845 </td> <td>Server rejected client authentication, due to unexpected TLV or value mismatch for a TLV.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_INVALID_PREFERENCES 846 </td> <td>Either VPN destination preference is not selected by the user or it is no longer valid.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_EAPTLS_SCARD_CACHE_CREDENTIALS_INVALID 847 </td> <td>Cached smart card credential is invalid.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_SSTP_COOKIE_SET_FAILURE 848 </td> <td>VPN connection attempt failed due to internal error occurred while adding cookies to the Secure Socket Tunneling Protocol (SSTP). Please see the System Event Log for the detailed information.</td> </tr> <tr class="even"> <td> ERROR_INVALID_PEAP_COOKIE_ATTRIBUTES 849 </td> <td>The PEAP inner method attribute(s) stored in the cookie is/are invalid.</td> </tr> <tr class="odd"> <td> ERROR_EAP_METHOD_NOT_INSTALLED 850 </td> <td>The Extensible Authentication Protocol type required for authentication of the remote access connection is not installed on your computer.</td> </tr> <tr class="even"> <td> ERROR_EAP_METHOD_DOES_NOT_SUPPORT_SSO 851 </td> <td>The Extensible Authentication Protocol type configured on the remote access connection does not support single sign-on.</td> </tr> <tr class="odd"> <td> ERROR_EAP_METHOD_OPERATION_NOT_SUPPORTED 852 </td> <td>The Extensible Authentication Protocol type configured on the remote access connection does not support the requested operation.</td> </tr> <tr class="even"> <td> ERROR_EAP_USER_CERT_INVALID 853 </td> <td>The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is not valid. Ensure that the certificate used for authentication is valid.</td> </tr> <tr class="odd"> <td> ERROR_EAP_USER_CERT_EXPIRED 854 </td> <td>The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is expired. Renew the certificate.</td> </tr> <tr class="even"> <td> ERROR_EAP_USER_CERT_REVOKED 855 </td> <td>The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is revoked. Use a certificate that has not been revoked.</td> </tr> <tr class="odd"> <td> ERROR_EAP_USER_CERT_OTHER_ERROR 856 </td> <td>The remote access connection completed, but authentication failed because of an error in the certificate that authenticates the client to the server.</td> </tr> <tr class="even"> <td> ERROR_EAP_SERVER_CERT_INVALID 857 </td> <td>The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is not valid.</td> </tr> <tr class="odd"> <td> ERROR_EAP_SERVER_CERT_EXPIRED 858 </td> <td>The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is expired.</td> </tr> <tr class="even"> <td> ERROR_EAP_SERVER_CERT_REVOKED 859 </td> <td>The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is revoked.</td> </tr> <tr class="odd"> <td> ERROR_EAP_SERVER_CERT_OTHER_ERROR 860 </td> <td>The remote access connection completed, but authentication failed because of an error in the certificate that the client uses to authenticate the server.</td> </tr> <tr class="even"> <td> ERROR_EAP_USER_ROOT_CERT_NOT_FOUND 861 </td> <td>The remote access connection completed, but authentication failed because a trusted root certificate that validates the user certificate was not found in the Trusted Root Certification Authorities certificate store.</td> </tr> <tr class="odd"> <td> ERROR_EAP_USER_ROOT_CERT_INVALID 862 </td> <td>The remote access connection completed, but authentication failed because the trusted root certificate that is used to validate the user certificate is not valid.</td> </tr> <tr class="even"> <td> ERROR_EAP_USER_ROOT_CERT_EXPIRED 863 </td> <td>The remote access connection completed, but authentication failed because the certificate in the Trusted Root Certification Authorities certificate store that authenticates the user certificate is expired. Renew the certificate.</td> </tr> <tr class="odd"> <td> ERROR_EAP_SERVER_ROOT_CERT_NOT_FOUND 864 </td> <td>The remote access connection completed, but authentication failed because a certificate that validates the server certificate was not found in the Trusted Root Certification Authorities certificate store.</td> </tr> <tr class="even"> <td> ERROR_EAP_SERVER_ROOT_CERT_INVALID 865 </td> <td>The remote access connection completed, but authentication failed because the certificate in the Trusted Root Certification Authorities certificate store that validates the server certificate is not valid.</td> </tr> <tr class="odd"> <td> ERROR_EAP_SERVER_ROOT_CERT_NAME_REQUIRED 866 </td> <td>The remote access connection completed, but authentication failed because the certificate on the server computer does not have a server name specified.</td> </tr> <tr class="even"> <td> ERROR_PEAP_IDENTITY_MISMATCH 867 </td> <td>The PEAP outer identity is not same as the inner identity when identity privacy is turned OFF.</td> </tr> <tr class="odd"> <td> ERROR_DNSNAME_NOT_RESOLVABLE 868 </td> <td>The remote connection was not made because the name of the remote access server did not resolve.</td> </tr> <tr class="even"> <td> ERROR_EAPTLS_PASSWD_INVALID 869 </td> <td>The password provided for the certificate is not valid.</td> </tr> <tr class="odd"> <td> ERROR_IKEV2_PSK_INTERFACE_ALREADY_EXISTS 870 </td> <td>The interface could not be enabled because more than one interface with the same destination has been created with the pre-shared key authentication method. Change the destination/auth method and enable the interface.</td> </tr> </tbody> </table>

The following Routing and Remote Access (RRAS) API error codes are defined in mprerror.h. All error codes are supported in Windows 2000 or later versions of Windows unless specified otherwise.

<table> <colgroup> <col /> <col /> </colgroup> <thead> <tr class="header"> <th>Return code/value</th> <th>Description</th> </tr> </thead> <tbody> <tr class="odd"> <td> ERROR_ROUTER_STOPPED 900 </td> <td>The router is not running.</td> </tr> <tr class="even"> <td> ERROR_ALREADY_CONNECTED 901 </td> <td>The interface is already connected.</td> </tr> <tr class="odd"> <td> ERROR_UNKNOWN_PROTOCOL_ID 902 </td> <td>The specified protocol identifier is not known to the router.</td> </tr> <tr class="even"> <td> ERROR_DDM_NOT_RUNNING 903 </td> <td>The Demand-dial Interface Manager (DDM) is not running.</td> </tr> <tr class="odd"> <td> ERROR_INTERFACE_ALREADY_EXISTS 904 </td> <td>An interface with this name is already registered with the router.</td> </tr> <tr class="even"> <td> ERROR_NO_SUCH_INTERFACE 905 </td> <td>An interface with this name is not registered with the router.</td> </tr> <tr class="odd"> <td> ERROR_INTERFACE_NOT_CONNECTED 906 </td> <td>The interface is not connected.</td> </tr> <tr class="even"> <td> ERROR_PROTOCOL_STOP_PENDING 907 </td> <td>The specified protocol is stopping.</td> </tr> <tr class="odd"> <td> ERROR_INTERFACE_CONNECTED 908 </td> <td>The interface is connected and hence cannot be deleted.</td> </tr> <tr class="even"> <td> ERROR_NO_INTERFACE_CREDENTIALS_SET 909 </td> <td>The interface credentials have not been set.</td> </tr> <tr class="odd"> <td> ERROR_ALREADY_CONNECTING 910 </td> <td>This interface is already in the process of connecting.</td> </tr> <tr class="even"> <td> ERROR_UPDATE_IN_PROGRESS 911 </td> <td>An update of routing information on this interface is already in progress.</td> </tr> <tr class="odd"> <td> ERROR_INTERFACE_CONFIGURATION 912 </td> <td>The interface configration is not valid. There is already another interface that is connected to the same interface on the remote router.</td> </tr> <tr class="even"> <td> ERROR_NOT_CLIENT_PORT 913 </td> <td>A Remote Access Client attempted to connect over a port that was reserved for routers only.</td> </tr> <tr class="odd"> <td> ERROR_NOT_ROUTER_PORT 914 </td> <td>A Demand Dial Router attempted to connect over a port that was reserved for Remote Access Clients only.</td> </tr> <tr class="even"> <td> ERROR_CLIENT_INTERFACE_ALREADY_EXISTS 915 </td> <td>The client interface with this name already exists and is currently connected.</td> </tr> <tr class="odd"> <td> ERROR_INTERFACE_DISABLED 916 </td> <td>The interface is in a disabled state.</td> </tr> <tr class="even"> <td> ERROR_AUTH_PROTOCOL_REJECTED 917 </td> <td>The authentication protocol was rejected by the remote peer.</td> </tr> <tr class="odd"> <td> ERROR_NO_AUTH_PROTOCOL_AVAILABLE 918 </td> <td>There are no authentication protocols available for use.</td> </tr> <tr class="even"> <td> ERROR_PEER_REFUSED_AUTH 919 </td> <td>The connection could not be established because the authentication protocol used by the RAS/VPN server to verify your username and password could not be matched with the settings in your connection profile.</td> </tr> <tr class="odd"> <td> ERROR_REMOTE_NO_DIALIN_PERMISSION 920 </td> <td>The remote account does not have Remote Access permission.</td> </tr> <tr class="even"> <td> ERROR_REMOTE_PASSWD_EXPIRED 921 </td> <td>The remote account has expired.</td> </tr> <tr class="odd"> <td> ERROR_REMOTE_ACCT_DISABLED 922 </td> <td>The remote account is disabled.</td> </tr> <tr class="even"> <td> ERROR_REMOTE_RESTRICTED_LOGON_HOURS 923 </td> <td>The remote account is not permitted to logon at this time of day.</td> </tr> <tr class="odd"> <td> ERROR_REMOTE_AUTHENTICATION_FAILURE 924 </td> <td>Access was denied to the remote peer because the user name, password, or both is not valid on the domain.</td> </tr> <tr class="even"> <td> ERROR_INTERFACE_HAS_NO_DEVICES 925 </td> <td>There are no routing enabled ports available for use by this demand dial interface.</td> </tr> <tr class="odd"> <td> ERROR_IDLE_DISCONNECTED 926 </td> <td>The port has been disconnected due to inactivity.</td> </tr> <tr class="even"> <td> ERROR_INTERFACE_UNREACHABLE 927 </td> <td>The interface is not reachable at this time.</td> </tr> <tr class="odd"> <td> ERROR_SERVICE_IS_PAUSED 928 </td> <td>The Demand Dial service is in a paused state.</td> </tr> <tr class="even"> <td> ERROR_INTERFACE_DISCONNECTED 929 </td> <td>The interface has been disconnected by the administrator.</td> </tr> <tr class="odd"> <td> ERROR_AUTH_SERVER_TIMEOUT 930 </td> <td>The authentication server did not respond to authentication requests in a timely fashion.</td> </tr> <tr class="even"> <td> ERROR_PORT_LIMIT_REACHED 931 </td> <td>The maximum number of ports allowed for use in the multi-linked connection has been reached.</td> </tr> <tr class="odd"> <td> ERROR_PPP_SESSION_TIMEOUT 932 </td> <td>The connection time limit for the user has been reached.</td> </tr> <tr class="even"> <td> ERROR_MAX_LAN_INTERFACE_LIMIT 933 </td> <td>The maximum limit on the number of LAN interfaces supported has been reached.</td> </tr> <tr class="odd"> <td> ERROR_MAX_WAN_INTERFACE_LIMIT 934 </td> <td>The maximum limit on the number of Demand Dial interfaces supported has been reached.</td> </tr> <tr class="even"> <td> ERROR_MAX_CLIENT_INTERFACE_LIMIT 935 </td> <td>The maximum limit on the number of Remote Access Clients supported has been reached.</td> </tr> <tr class="odd"> <td> ERROR_BAP_DISCONNECTED 936 </td> <td>The port has been disconnected due to the Bandwidth Allocation Protocol (BAP) policy.</td> </tr> <tr class="even"> <td> ERROR_USER_LIMIT 937 </td> <td>Because another connection of your type is in use, the incoming connection cannot accept your connection request.</td> </tr> <tr class="odd"> <td> ERROR_NO_RADIUS_SERVERS 938 </td> <td>No RADIUS servers were located on the network.</td> </tr> <tr class="even"> <td> ERROR_INVALID_RADIUS_RESPONSE 939 </td> <td>The response received from the RADIUS authentication server was not valid. Make sure that the case sensitive secret password for the RADIUS server is set correctly.</td> </tr> <tr class="odd"> <td> ERROR_DIALIN_HOURS_RESTRICTION 940 </td> <td>You do not have permission to connect at this time.</td> </tr> <tr class="even"> <td> ERROR_ALLOWED_PORT_TYPE_RESTRICTION 941 </td> <td>You do not have permission to connect using the current device type.</td> </tr> <tr class="odd"> <td> ERROR_AUTH_PROTOCOL_RESTRICTION 942 </td> <td>The connection could not be established because the authentication method used by your connection profile is not permitted for use by an access policy configured on the RAS/VPN server. Specifically, this could be due to configuration differences between the authentication method selected on the RAS/VPN server and the access policy configured for it.</td> </tr> <tr class="even"> <td> ERROR_BAP_REQUIRED 943 </td> <td>BAP is required for this user.</td> </tr> <tr class="odd"> <td> ERROR_DIALOUT_HOURS_RESTRICTION 944 </td> <td>The interface is not allowed to connect at this time.</td> </tr> <tr class="even"> <td> ERROR_ROUTER_CONFIG_INCOMPATIBLE 945 </td> <td>The saved router configuration is incompatible with the current router.</td> </tr> <tr class="odd"> <td> WARNING_NO_MD5_MIGRATION 946 </td> <td>Remote Access has detected older format user accounts that will not be migrated automatically.</td> </tr> <tr class="even"> <td> ERROR_PROTOCOL_ALREADY_INSTALLED 948 </td> <td>The transport is already installed with the router.</td> </tr> <tr class="odd"> <td> ERROR_INVALID_SIGNATURE_LENGTH 949 </td> <td>The signature length received in a packet from RADIUS server is not valid.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_SIGNATURE 950 </td> <td>The signature received in a packet from RADIUS server is not valid.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_NO_SIGNATURE 951 </td> <td>Did not receive signature along with EAPMessage from RADIUS server.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_PACKET_LENGTH_OR_ID 952 </td> <td>The length or Id received in a packet from RADIUS server is not valid.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_INVALID_ATTRIBUTE_LENGTH 953 </td> <td>The length received in a packet with attribute from RADIUS server is not valid.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_INVALID_PACKET 954 </td> <td>The packet received from RADIUS server in not valid.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="odd"> <td> ERROR_AUTHENTICATOR_MISMATCH 955 </td> <td>Authenticator does not match in packet from RADIUS server.

Note: Supported in Windows XP and later versions of Windows.

</td> </tr> <tr class="even"> <td> ERROR_REMOTEACCESS_NOT_CONFIGURED 956 </td> <td>Routing and Remote access server is either not configured or not running.

Note: Supported in Windows 7 and later versions of Windows.

</td> </tr> </tbody> </table>

Requirements

Requirement Value
Minimum supported client Windows 2000 Professional [desktop apps only]
Minimum supported server Windows 2000 Server [desktop apps only]

Source: Microsoft Learn / Windows Win32 documentation by Microsoft and contributors. Documentation licensed CC BY 4.0. Code samples are covered by the MIT License. Converted from Markdown, with links normalized and embedded media omitted.

资料来源与适用范围

资料来源
Microsoft Learn / Windows Win32 documentation
适用范围
Windows Win32 API · Source date 05/31/2018
内容语言
中文;命令、路径和错误标识保留技术原文
本地收录日期
2026-11-15
授权说明
CC BY 4.0 (documentation), MIT (code samples)

正文与所需资源由本站本地存储。查看来源及更新记录 ↗

请按适用版本和实际日志确认原因;本站没有对每一种系统或设备逐项执行文中的操作。